LAISHA
Open Laisha

GATE AG Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants: practice questions

GATE — Agricultural Engineering (AG), for dairy engineering aspirants · India · IITs and IISc on rotation

Original practice questions written to the published syllabus · not past papers
10worked here, free
30written to this exam in this subject
10syllabus units

About GATE AG

GATE — Agricultural Engineering (AG), for dairy engineering aspirants is a postgraduate admission exam run by IITs and IISc on rotation, for candidates in India.

Official site: gate2026.iitg.ac.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants in GATE AG

Fluid properties, pumping, thermodynamics and heat transfer worked as dairy plant problems.

Our 30 GATE AG questions in this subject: 6 easy, 21 medium, 3 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE AG and are not shown on any other exam's page.

Question 1 · medium

Milk flows at 10 m³/h through a pipe of 51 mm internal diameter. What is its mean velocity?

  1. 5.44 m/s
  2. 0.34 m/s
  3. 4895 m/s
  4. 1.36 m/s
Answer and working

D. 1.36 m/s

A = π(0.051)²/4 = 2.04 × 10⁻³ m²; v = (10/3600)/A = 1.36 m/s. Forgetting the /4 in the area gives 0.34.

Question 2 · medium

Six bends each with K = 0.9 are in a line carrying milk at 1.5 m/s. What is the total minor loss?

  1. 0.10 m
  2. 0.62 m
  3. 0.41 m
  4. 12.15 m
Answer and working

B. 0.62 m

h_m = ΣK v²/2g = 6 × 0.9 × 0.1147 = 0.62 m.

Question 3 · medium

A centrifugal pump delivers 20 m³/h of milk against 25 m of head at 60% efficiency. What shaft power is needed?

  1. 2.34 kW
  2. 1.40 kW
  3. 0.84 kW
  4. 8420 kW
Answer and working

A. 2.34 kW

P = ρgQH/η = 1,030 × 9.81 × 0.00556 × 25/0.6 = 2,339 W = 2.34 kW. 1.40 kW is the hydraulic power.

Question 4 · medium

A yoghurt follows τ = Kγ̇ⁿ with K = 10 Pa·sⁿ and n = 0.3. What is its apparent viscosity at 10 s⁻¹?

  1. 0.40 Pa·s
  2. 20.0 Pa·s
  3. 10.00 Pa·s
  4. 2.00 Pa·s
Answer and working

D. 2.00 Pa·s

μ_app = Kγ̇^(n−1) = 10 × 10^(−0.7) = 2.00 Pa·s; at 100 s⁻¹ it falls to 0.40 Pa·s.

Question 5 · medium

How much heat is needed to warm 5,000 kg/h of milk (c_p = 3.9 kJ/kg K) from 60 °C to 90 °C?

  1. 585 kW
  2. 174.2 kW
  3. 81.2 kW
  4. 162.5 kW
Answer and working

D. 162.5 kW

Q = ṁc_pΔT = 5,000 × 3.9 × 30 = 585,000 kJ/h = 162.5 kW. Using water's c_p gives 174.2 kW.

Question 6 · medium

How much heat is conducted through 1 m² of stainless steel 0.6 mm thick (k = 16 W/m K) with 1 K across it?

  1. 0.0096 W
  2. 26.7 W
  3. 16 W
  4. 26,667 W
Answer and working

D. 26,667 W

Q = kAΔT/L = 16 × 1 × 1/0.0006 = 26,667 W. Using L in mm gives 26.7.

Question 7 · medium

In a counter-current exchanger, hot water enters at 90 °C and leaves at 80 °C; milk enters at 60 °C and leaves at 75 °C. The LMTD is:

  1. 17.5 K
  2. 15.0 K
  3. 17.4 K
  4. 20.0 K
Answer and working

C. 17.4 K

ΔT₁ = 90 − 75 = 15 K, ΔT₂ = 80 − 60 = 20 K; LMTD = 5/ln(20/15) = 17.4 K, slightly below the arithmetic mean of 17.5 K.

Question 8 · easy

Raw milk enters a pasteuriser at 4 °C and leaves the regenerator at 66 °C; pasteurisation is at 72 °C. The regeneration efficiency is:

  1. 91%
  2. 92%
  3. 8%
  4. 86%
Answer and working

A. 91%

η_R = (66 − 4)/(72 − 4) = 62/68 = 91%. Dividing by 72 forgets the inlet temperature.

Question 9 · medium

A plate section has U = 3,000 W/m² K and A = 20 m² with an LMTD of 17.4 K. Its duty is about:

  1. 1050 kW
  2. 60 kW
  3. 1042818 kW
  4. 1043 kW
Answer and working

D. 1043 kW

Q = UA·LMTD = 3,000 × 20 × 17.4 = 1043 kW.

Question 10 · easy

2,000 kg of milk at 4 °C is mixed with 500 kg at 40 °C. The final temperature (equal c_p, no losses) is:

  1. 22.0 °C
  2. 11.2 °C
  3. 8.0 °C
  4. 36.0 °C
Answer and working

B. 11.2 °C

T = (2,000 × 4 + 500 × 40)/2,500 = 11.2 °C; 22 °C is the simple average.

A study plan for Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants in GATE AG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (57% of the 30 questions): Mass and energy balances in dairy processes (5, 17%); Fluid properties and Bernoulli's equation (4, 13%); Heat exchangers: LMTD and effectiveness-NTU (4, 13%); Pipe flow, Reynolds number and friction losses (4, 13%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Conduction, convection and radiation (3, 10%); Laws of thermodynamics; steam tables (3, 10%); Fins and insulation (2, 7%); Flow of non-Newtonian dairy fluids (2, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Sanitary centrifugal and positive displacement pumps; pump selection (2, 7%); Dimensionless numbers and dimensional analysis (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Conduction, convection and radiation (1 hard of 3), Laws of thermodynamics; steam tables (1 hard of 3), Pipe flow, Reynolds number and friction losses (1 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Mass and energy balances in dairy processes (2 easy of 5); Conduction, convection and radiation (1 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE AG Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.