FSPCA Preventive Controls Qualified Individual and related courses Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes: practice questions
FSPCA Preventive Controls Qualified Individual (PCQI) and related courses · USA · Food Safety Preventive Controls Alliance
Original practice questions written to the published syllabus · not past papers
10worked here, free
24written to this exam in this subject
10syllabus units
About FSPCA Preventive Controls Qualified Individual and related courses
FSPCA Preventive Controls Qualified Individual (PCQI) and related courses is a professional certification run by Food Safety Preventive Controls Alliance, for candidates in USA. Standardised training courses ending in an FSPCA certificate with a unique identifier; the site does not state whether a test is part of the course.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes in FSPCA Preventive Controls Qualified Individual and related courses
Building, running and auditing a food safety management system: prerequisite programmes and good manufacturing practice, the seven HACCP principles applied in depth, preventive controls, ISO 22000 and the GFSI-benchmarked certification schemes, food defence, food safety culture, traceability and recall, and auditing practice.
Our 24 FSPCA Preventive Controls Qualified Individual and related courses questions in this subject: 3 easy, 12 medium, 9 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to FSPCA Preventive Controls Qualified Individual and related courses and are not shown on any other exam's page.
Question 1 · medium
Why does the HACCP product description record the intended consumers?
The label must list the names of the main retail customers for traceability
Consumer age determines the calibration frequency of thermometers
Vulnerable consumers such as infants raise the significance of hazards
Intended consumers decide which certification scheme the plant must use
Answer and working
C. Vulnerable consumers such as infants raise the significance of hazards
Intended use and users affect the acceptable level and significance of hazards, for example Listeria or Cronobacter in foods for vulnerable groups.
Question 2 · hard
A HACCP team scores likelihood and severity from 1 to 4 and treats products of 8 or more as significant. A hazard scores likelihood 3 and severity 4. Its score and status are:
12, significant
7, not significant
7, significant
12, not significant
Answer and working
A. 12, significant
Score = 3 × 4 = 12, which is above the threshold of 8, so the hazard is significant. 7 adds instead of multiplying.
Question 3 · hard
A metal detector check every hour fails at 14:00; the last good check was at 13:00. The line packs 1,800 packs per hour. How many packs must be held and re-inspected, at minimum?
3,600
30
1,800
900
Answer and working
C. 1,800
All product since the last acceptable check is suspect: one hour at 1,800 packs per hour = 1,800 packs. 900 assumes half the hour; 3,600 holds two hours.
Question 4 · hard
A batch of chilled soup missed its cooking critical limit. A laboratory test of five samples finds no pathogens. Should the batch be released?
No: reprocess by a validated process or destroy it
Yes: five negative samples show the hazard is absent from the whole batch
No: but it can be sold to a catering customer who will reheat it
Yes: provided the shelf life is halved and the label says keep refrigerated
Answer and working
A. No: reprocess by a validated process or destroy it
Sampling cannot detect low-level contamination reliably; disposition must rely on validated reprocessing or destruction.
Question 5 · easy
Under the FDA Preventive Controls for Human Food rule, who must prepare or oversee the food safety plan?
The plant's external auditor
A licensed food analyst
A state food safety inspector
A Preventive Controls Qualified Individual
Answer and working
D. A Preventive Controls Qualified Individual
The rule requires a PCQI, qualified by standardised training or experience.
Question 6 · medium
Under the FSMA Intentional Adulteration rule, which three elements are considered in a vulnerability assessment?
Cost of the ingredient, number of suppliers, distance to customers
Number of employees, shift pattern, plant floor area
Public health impact, physical access, ability to contaminate
Likelihood of spoilage, shelf life, storage temperature
Answer and working
C. Public health impact, physical access, ability to contaminate
These three elements are assessed at each point, step or procedure to find actionable process steps.
Question 7 · medium
Which is one of the key activity types identified by FDA as often vulnerable to intentional adulteration?
Printing of best-before dates
Bulk liquid receiving and loading
Weighing of finished cartons
Cleaning of office areas
Answer and working
B. Bulk liquid receiving and loading
Key activity types: bulk liquid receiving and loading, liquid storage and handling, secondary ingredient handling, and mixing.
Question 8 · easy
Cross-contact in allergen management means:
Transfer of flavour between products stored side by side
Contamination of food by pathogenic bacteria from raw meat
Unintended transfer of an allergen into another product
Mixing of two raw materials that are both declared on the label
Answer and working
C. Unintended transfer of an allergen into another product
Cross-contact refers to allergens; cross-contamination is used for microorganisms.
Question 9 · medium
How is cleaning between allergen and non-allergen runs validated?
By total viable counts on product swabs taken after cleaning
By visual inspection only, since allergens are always visible as residues
By ATP bioluminescence alone, because ATP measures allergen protein directly
Allergen-specific ELISA or lateral flow tests on surfaces and rinses
Answer and working
D. Allergen-specific ELISA or lateral flow tests on surfaces and rinses
Allergen-specific tests show removal of the allergen; ATP and microbial counts do not measure allergen proteins.
Question 10 · hard
Which is a suitable critical limit for a metal detector CCP?
Rejection of test pieces of stated sizes and metal types
Absence of metal complaints from customers over the past year
The detector being switched on at the start of the shift
A visual check that no metal is seen on the conveyor
Answer and working
A. Rejection of test pieces of stated sizes and metal types
Critical limits must be specific and measurable; test pieces of stated sizes and materials passed through the aperture define detector performance.
A study plan for Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes in FSPCA Preventive Controls Qualified Individual and related courses
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (54% of the 24 questions): Allergen management programmes (4, 17%); HACCP: critical control points, critical limits and monitoring (3, 13%); Operational prerequisite programmes and preventive controls (3, 13%); Traceability, withdrawal and recall (3, 13%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Food defence and vulnerability assessment (2, 8%); Food safety culture (2, 8%); Good manufacturing and good hygiene practices (2, 8%); HACCP: corrective actions, verification, validation and records (2, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: HACCP: preliminary steps and hazard analysis (2, 8%); Prerequisite programmes (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: HACCP: critical control points, critical limits and monitoring (3 hard of 3), HACCP: corrective actions, verification, validation and records (2 hard of 2), Food safety culture (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Operational prerequisite programmes and preventive controls (2 easy of 3); Allergen management programmes (1 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.