FSSAI FoSTaC Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes: practice questions
FSSAI FoSTaC — Food Safety Supervisor training and certification · India · Food Safety and Standards Authority of India (through empanelled training partners)
Original practice questions written to the published syllabus · not past papers
10worked here, free
24written to this exam in this subject
10syllabus units
About FSSAI FoSTaC
FSSAI FoSTaC — Food Safety Supervisor training and certification is a professional certification run by Food Safety and Standards Authority of India (through empanelled training partners), for candidates in India. Short training courses (basic, advanced and special levels by sector) ending in an assessment; licensed food businesses must have trained food safety supervisors.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes in FSSAI FoSTaC
Practical application: writing hazard analyses, choosing CCPs and preventive controls, setting critical limits and corrective actions, allergen and recall programmes, food defence plans, culture, and audit evidence and nonconformity grading.
Building, running and auditing a food safety management system: prerequisite programmes and good manufacturing practice, the seven HACCP principles applied in depth, preventive controls, ISO 22000 and the GFSI-benchmarked certification schemes, food defence, food safety culture, traceability and recall, and auditing practice.
Our 24 FSSAI FoSTaC questions in this subject: 3 easy, 12 medium, 9 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to FSSAI FoSTaC and are not shown on any other exam's page.
Question 1 · medium
A packer on a ready-to-eat line reports vomiting and diarrhoea since last night. What should the supervisor do?
Allow the worker to continue if wearing gloves and a face mask throughout the shift on the line
Ask the worker to take an anti-diarrhoeal medicine and continue normal duties on the packing line
Move the worker to the raw-material area, where products will be cooked later in the process
Exclude the worker from open-food handling until the set period after symptoms stop
Answer and working
D. Exclude the worker from open-food handling until the set period after symptoms stop
Workers with vomiting or diarrhoea are excluded from open food, typically until a set period (often 48 hours) after symptoms stop. Gloves do not prevent viral spread, and moving them to raw areas still risks contamination.
Question 2 · medium
After an engineer repairs a filler on an open-food line, what should happen before production restarts?
A hygiene clearance: tools and parts removed, equipment cleaned and sanitised
Testing of the first ten filled units for Salmonella before the rest of the batch is run
Immediate restart, because the cleaning crew will clean the filler at the end of the shift anyway
A full HACCP plan revalidation by an external consultant before any product is filled
Answer and working
A. A hygiene clearance: tools and parts removed, equipment cleaned and sanitised
Maintenance can leave tools, swarf or contamination; a documented hygiene clearance is the standard GMP control.
Question 3 · medium
Rework is controlled as a prerequisite programme mainly because it:
Always contains higher pathogen levels than fresh product from the line
Is legally prohibited in all food products in most countries
Changes the critical limits that apply to the cooking step
Can carry allergens into the wrong product and break traceability links
Answer and working
D. Can carry allergens into the wrong product and break traceability links
Rework must be identified, stored separately, used only in compatible products and recorded, because it is a classic route for allergen cross-contact and lost traceability.
Question 4 · hard
A plant sets an operating limit of 75 °C core temperature for a product whose critical limit is 72 °C. The core reads 74 °C. What should happen?
Destroy the batch because the operating limit is a legal minimum
Hold all product made since the last check and start corrective action at once
Record nothing, because only critical limit breaches are written down
Adjust the process back above 75 °C; the critical limit is not breached
Answer and working
D. Adjust the process back above 75 °C; the critical limit is not breached
Crossing an operating limit triggers a process adjustment before the critical limit is reached; product is still within the critical limit.
Question 5 · medium
Which control is most likely to be managed as an OPRP rather than a CCP?
Extra slicer cleaning in a ready-to-eat area
Acidification of a low-acid vegetable to pH 4.6
Pasteurisation of milk with flow diversion
Retort sterilisation of low-acid canned soup
Answer and working
A. Extra slicer cleaning in a ready-to-eat area
Slicer cleaning controls a significant hazard but is verified by observation and action criteria; the others are classic CCPs with measurable critical limits.
Question 6 · easy
The US Food Safety Modernization Act was signed into law in:
2011
1996
2001
2016
Answer and working
A. 2011
FSMA was signed in January 2011; the preventive controls rule followed in 2015 and the intentional adulteration rule in 2016.
Question 7 · hard
After a culture programme, the number of near-miss reports from the floor doubles while incidents stay level. The best interpretation is:
Staff feel safer to report problems, a sign of improving culture
Near misses are irrelevant to food safety and should not be counted
Food safety has clearly worsened and the programme has failed
Reporting should be discouraged to reduce the workload of quality staff
Answer and working
A. Staff feel safer to report problems, a sign of improving culture
More reporting with stable incidents often reflects openness and trust; under-reporting is a sign of poor culture.
Question 8 · medium
Under the FSMA Food Traceability Rule, firms must keep key data elements for:
Only the final retail sale to the consumer
Every ingredient used anywhere in the facility, whatever the food
Only foods imported from outside the United States
Critical tracking events such as shipping and receiving
Answer and working
D. Critical tracking events such as shipping and receiving
The rule applies to foods on the Food Traceability List and links critical tracking events by traceability lot codes.
Question 9 · hard
In a trace exercise, a plant identifies 4,650 of 5,000 packs from a recalled lot within the time allowed. What percentage was traced, and is it adequate if the scheme target is 100% reconciliation?
96%, adequate because more than 95% was found
93%, not adequate; the gap of 350 packs must be investigated
93%, adequate because more than 90% was found
107%, not adequate because records overcount the lot
Answer and working
B. 93%, not adequate; the gap of 350 packs must be investigated
4,650 / 5,000 = 0.93 = 93%. Where full reconciliation is required, unexplained gaps must be investigated.
Question 10 · medium
Why should allergen-containing ingredients be stored below, not above, non-allergen ingredients?
Allergen proteins rise in warm air near the ceiling
Allergens degrade faster when stored on high racks
Fire regulations require heavy sacks on the floor
Spills then cannot fall onto other materials
Answer and working
D. Spills then cannot fall onto other materials
Segregation by position prevents spills from contaminating other materials; dedicated or colour-coded utensils help too.
A study plan for Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes in FSSAI FoSTaC
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (54% of the 24 questions): Allergen management programmes (4, 17%); HACCP: critical control points, critical limits and monitoring (3, 13%); Operational prerequisite programmes and preventive controls (3, 13%); Traceability, withdrawal and recall (3, 13%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Food defence and vulnerability assessment (2, 8%); Food safety culture (2, 8%); Good manufacturing and good hygiene practices (2, 8%); HACCP: corrective actions, verification, validation and records (2, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: HACCP: preliminary steps and hazard analysis (2, 8%); Prerequisite programmes (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: HACCP: critical control points, critical limits and monitoring (3 hard of 3), HACCP: corrective actions, verification, validation and records (2 hard of 2), Food safety culture (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Operational prerequisite programmes and preventive controls (2 easy of 3); Allergen management programmes (1 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.