LAISHA
Open Laisha

State Forest Service Wood Products & Forest-Based Industries: practice questions

State Forest Service — Assistant Conservator of Forests (state PSC exams) · India · State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC)

Original practice questions written to the published syllabus · not past papers
10worked here, free
28written to this exam in this subject
10syllabus units

About State Forest Service

State Forest Service — Assistant Conservator of Forests (state PSC exams) is a government recruitment exam run by State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC), for candidates in India. Typically a preliminary objective paper, a written main examination including forestry or science optional papers, and an interview, plus physical tests.

Official site: tnpsc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Wood Products & Forest-Based Industries in State Forest Service

Sawmill recovery, plywood grades, pulpwood species, charcoal making and fuelwood, transit and legality of timber.

Turning wood into products: sawmilling, veneer and plywood, panels and engineered wood, pulp and paper, wood energy and the chemistry of wood-based industries.

Our 28 State Forest Service questions in this subject: 12 easy, 16 medium, 0 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to State Forest Service and are not shown on any other exam's page.

Question 1 · medium

An edger in a sawmill:

  1. Cuts boards to length at both ends
  2. Removes wane and sets board width
  3. Peels veneer
  4. Debarks logs
Answer and working

B. Removes wane and sets board width

Trimmers cut boards to length.

Question 2 · easy

MDF is made from:

  1. Thin veneers
  2. Wood fibres
  3. Long oriented strands
  4. Solid boards
Answer and working

B. Wood fibres

Fibres come from thermomechanical refining of chips.

Question 3 · medium

Particleboard typically has a three-layer structure with:

  1. Coarse particles at the surfaces
  2. Veneer cores
  3. Fine particles at the surfaces
  4. No resin in the core
Answer and working

C. Fine particles at the surfaces

Fine faces give smooth surfaces for laminating.

Question 4 · medium

Laminate flooring cores are commonly made of:

  1. Insulation board
  2. High-density fibreboard
  3. Low-density particleboard
  4. Softwood veneer
Answer and working

B. High-density fibreboard

HDF gives hard, stable cores.

Question 5 · easy

Glulam is made by gluing laminations with their grain:

  1. At right angles in alternate layers
  2. In random directions
  3. Parallel to the length
  4. Vertical only
Answer and working

C. Parallel to the length

CLT uses cross layers; glulam uses parallel layers.

Question 6 · medium

Finger joints in glulam are used to:

  1. Join panels side by side into wide slabs
  2. Fix beams to walls
  3. Grade timber
  4. Join laminations end to end
Answer and working

D. Join laminations end to end

They make long laminations from short pieces.

Question 7 · easy

The dominant chemical pulping process worldwide is:

  1. Sulphite
  2. Kraft, or sulphate
  3. Stone groundwood
  4. Soda-lime
Answer and working

B. Kraft, or sulphate

Kraft gives strong pulp and allows chemical recovery.

Question 8 · easy

Viscose (rayon) fibres are made from:

  1. Kraft lignin
  2. Bark
  3. Resin
  4. Dissolving pulp
Answer and working

D. Dissolving pulp

Highly purified cellulose pulp is regenerated into fibres.

Question 9 · medium

Good detailing protects timber in buildings mainly by:

  1. Sealing it inside wet cavities
  2. Keeping it dry and ventilated
  3. Burying it in soil
  4. Exposing end grain to rain
Answer and working

B. Keeping it dry and ventilated

Dry wood does not decay.

Question 10 · medium

The cascading use of wood means:

  1. Burning wood first and recycling the ash
  2. Using each piece of wood only once
  3. Best uses first, energy last
  4. Exporting all wood to other countries
Answer and working

C. Best uses first, energy last

It extends the life and value of wood resources.

A study plan for Wood Products & Forest-Based Industries in State Forest Service

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (46% of the 28 questions): Wood energy: fuelwood, charcoal, pellets (4, 14%); Particleboard, fibreboard (MDF) and oriented strand board (3, 11%); Pulp and paper: raw materials, pulping processes (3, 11%); Sawmilling and recovery (3, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Timber in construction and its standards (3, 11%); Veneer and plywood manufacture (3, 11%); Wood-based industries: raw-material supply and residues (3, 11%); Chain of custody and legality in wood supply (2, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Engineered wood: glulam, LVL, cross-laminated timber (2, 7%); Wood chemistry and extractives (2, 7%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Bank the easy marks: Pulp and paper: raw materials, pulping processes (2 easy of 3); Wood energy: fuelwood, charcoal, pellets (2 easy of 4).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — State Forest Service Wood Products & Forest-Based Industries

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.