State Forest Service Wood Seasoning, Preservation & Protection: practice questions
State Forest Service — Assistant Conservator of Forests (state PSC exams) · India · State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC)
Original practice questions written to the published syllabus · not past papers
10worked here, free
34written to this exam in this subject
12syllabus units
About State Forest Service
State Forest Service — Assistant Conservator of Forests (state PSC exams) is a government recruitment exam run by State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC), for candidates in India. Typically a preliminary objective paper, a written main examination including forestry or science optional papers, and an interview, plus physical tests.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Wood Seasoning, Preservation & Protection in State Forest Service
Stacking for air seasoning, kiln types, seasoning defects, ASCU and creosote treatment, retention calculations and treatment of poles and bamboo.
Drying timber without defects and protecting it from decay, insects and fire, by chemical, biological and modified-wood methods.
Our 34 State Forest Service questions in this subject: 17 easy, 17 medium, 0 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to State Forest Service and are not shown on any other exam's page.
Question 1 · easy
In air seasoning stacks, stickers should be:
Of random thickness and staggered from layer to layer
Made of green, wet wood of any species
Placed only at the ends of each board
Of uniform thickness and aligned vertically
Answer and working
D. Of uniform thickness and aligned vertically
Aligned, uniform stickers carry weight straight down and prevent bowing.
Question 2 · medium
Heavy weights placed on top of air-seasoning stacks:
Speed up drying of the lower layers
Protect the stack completely from driving rain
Restrain warping of the upper layers
Prevent end checks
Answer and working
C. Restrain warping of the upper layers
Top boards are otherwise free to cup and twist.
Question 3 · medium
Equalising during kiln drying aims to:
Bring all boards to a similar moisture content
Make boards of equal length and width
Equalise colour
Equalise density
Answer and working
A. Bring all boards to a similar moisture content
Wetter boards catch up with drier ones.
Question 4 · medium
Sticker stain develops where:
Boards are kiln dried quickly at high temperature
Ends are coated
Stickers contact boards in slow, humid drying
Wood is stored under water
Answer and working
C. Stickers contact boards in slow, humid drying
Fungal or chemical discolouration forms at sticker contact.
Question 5 · easy
Solar kilns dry wood compared with air seasoning:
Faster and to lower moisture
More slowly and to higher moisture
Only at night
Without any heat
Answer and working
A. Faster and to lower moisture
Solar heat raises temperature; daily cycles relieve stresses.
Question 6 · medium
A drawback of salt seasoning is that treated wood becomes:
Hygroscopic and corrosive to fastenings
Very light and brittle, like balsa
Fully fire-proof
Impossible to saw
Answer and working
A. Hygroscopic and corrosive to fastenings
Salts attract moisture in service.
Question 7 · medium
The first line of defence against biological attack on wood in service is:
Painting the wood every week with oil
Burning it periodically
Design that keeps wood dry
Storing it in water
Answer and working
C. Design that keeps wood dry
Dry wood cannot decay.
Question 8 · easy
A charge of 0.25 m³ of wood absorbs 50 kg of a 4% preservative solution. What is the retention?
200 kg/m³
2 kg/m³
0.5 kg/m³
8 kg/m³
Answer and working
D. 8 kg/m³
Retention = 50 × 0.04 ÷ 0.25 = 8 kg/m³. 200 is solution uptake per m³; 2 kg is the preservative mass.
Question 9 · medium
The Indian code of practice for preservation of timber is:
IS 883
IS 1708
IS 456
IS 401
Answer and working
D. IS 401
IS 883 covers structural timber design; IS 1708 testing.
Question 10 · easy
Typical charring rates of many woods are of the order of:
6–8 mm per minute
0.6–0.8 mm per minute
0.06–0.08 mm per minute
60–80 mm per minute
Answer and working
B. 0.6–0.8 mm per minute
Denser hardwoods char more slowly.
A study plan for Wood Seasoning, Preservation & Protection in State Forest Service
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (35% of the 34 questions): Air seasoning (3, 9%); Fire retardants (3, 9%); Kiln seasoning: kiln types and schedules (3, 9%); Preservatives: oil-type, water-borne, organic solvent (3, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Retention, penetration and treatment standards (3, 9%); Safety and environmental rules on preservatives (3, 9%); Sap-displacement and diffusion methods (3, 9%); Seasoning defects and their control (3, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Solar and other low-cost seasoning (3, 9%); Treatment methods: non-pressure and pressure (full-cell, empty-cell) (3, 9%); Biological and environmentally safer preservation; modified wood (2, 6%); Wood-destroying agents: fungi, insects, marine borers (2, 6%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Fire retardants (2 easy of 3); Preservatives: oil-type, water-borne, organic solvent (2 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.