CUET-PG Environmental Monitoring & Instrumental Analysis: practice questions
CUET-PG — Environmental Sciences · India · National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
24written to this exam in this subject
12syllabus units
About CUET-PG
CUET-PG — Environmental Sciences is a postgraduate admission exam run by National Testing Agency, for candidates in India. Computer-based MCQ test for MSc admission to central and participating universities; pattern set in each year's bulletin.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Environmental Monitoring & Instrumental Analysis in CUET-PG
How environmental samples are taken and analysed and how good the numbers are: sampling plans, gravimetric and volumetric methods, spectroscopy, chromatography, quality assurance and monitoring networks.
Our 24 CUET-PG questions in this subject: 23 easy, 1 medium, 0 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to CUET-PG and are not shown on any other exam's page.
Question 1 · easy
How should water samples for dissolved metal analysis usually be preserved?
Treated with sulphuric acid and heated to 100 °C
Frozen with sodium thiosulphate
Left at room temperature in glass bottles
Filtration and nitric acid to pH below 2
Answer and working
D. Filtration and nitric acid to pH below 2
Nitric acid keeps metals in solution and prevents adsorption; thiosulphate is for chlorinated microbiological samples.
Question 2 · medium
Why are volatile organic compound water samples collected in vials with no headspace?
To add oxygen that preserves the VOCs
To allow microbes to degrade the VOCs quickly
To make room for adding acid later
To stop VOCs escaping into the vial air
Answer and working
D. To stop VOCs escaping into the vial air
Headspace would let volatile analytes partition out of the water.
Question 3 · easy
At what temperature is the residue dried for total dissolved solids?
180 °C
550 °C
103–105 °C
20 °C
Answer and working
A. 180 °C
TDS residue is dried at 180 °C; TSS at 103–105 °C; volatile solids are ignited at 550 °C.
Question 4 · easy
Which indicator is used in the EDTA titration for total hardness?
Phenolphthalein
Starch
Eriochrome Black T
Ferroin
Answer and working
C. Eriochrome Black T
Eriochrome Black T changes from wine-red to blue; phenolphthalein for alkalinity; starch for iodine; ferroin for COD.
Question 5 · easy
The Beer–Lambert law states that absorbance is proportional to
concentration and path length
the square of concentration
temperature only
wavelength only
Answer and working
A. concentration and path length
A = εbc: absorbance rises linearly with concentration and path length, not with temperature or wavelength alone.
Question 6 · easy
Which GC detector is extremely sensitive to halogenated compounds such as organochlorine pesticides?
Electron capture detector
Thermal conductivity detector
Flame ionisation detector
Refractive index detector
Answer and working
A. Electron capture detector
ECD responds strongly to electronegative halogens; FID is general for organics; TCD is universal but insensitive.
Question 7 · easy
Electrical conductivity of water increases mainly with
A method gives results that cluster tightly but are consistently 20 per cent too high. It is
neither precise nor accurate in any sense
both accurate and precise
accurate but not precise
precise but not accurate
Answer and working
D. precise but not accurate
Tight clustering is precision; a consistent offset is bias, reducing accuracy.
Question 9 · easy
A stream sample contains 120 macroinvertebrates, of which 45 are mayflies, stoneflies and caddisflies. What is the EPT percentage?
45 per cent
2.7 per cent
37.5 per cent
62.5 per cent
Answer and working
C. 37.5 per cent
45/120 × 100 = 37.5%. 45 confuses count with percentage; 2.7 inverts; 62.5 is the non-EPT share.
Question 10 · easy
Which organisms are classic bioindicators of sulphur dioxide air pollution?
Honeybees
Lichens
Coral polyps
Earthworms
Answer and working
B. Lichens
Many lichens are sensitive to SO2; lichen diversity maps air quality.
A study plan for Environmental Monitoring & Instrumental Analysis in CUET-PG
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (42% of the 24 questions): Bioindicators and biomonitoring (3, 13%); Sampling and preservation of water, soil, air and biota (3, 13%); Atomic absorption and ICP techniques (2, 8%); Detection limits, accuracy, precision and calibration (2, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Electrochemical methods and sensors (2, 8%); Gas and liquid chromatography; mass spectrometry (2, 8%); Gravimetric and volumetric analysis (2, 8%); Monitoring objectives and network design (2, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Stable and radioactive isotopes in environmental analysis (2, 8%); UV-visible spectrophotometry and colorimetry (2, 8%); Continuous and low-cost sensor monitoring (1, 4%); Quality assurance, quality control and laboratory accreditation (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Bioindicators and biomonitoring (3 easy of 3); Atomic absorption and ICP techniques (2 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.