From the Laisha Library · Soil science
Reading a soil test report
pH, organic matter, CEC, salinity and the nutrient numbers: how to take a sample the laboratory can trust, and what each line on the report means for your field.
A soil test is the cheapest piece of farm science there is. For the price of a few bags of fertiliser it tells you whether you need those bags at all, whether the soil is too acid for the crop you plan, and whether salt is building up in an irrigated field. But a soil test report can look like a page of chemistry homework: pH, OM, CEC, EC, P, K, ppm, meq. This article, based on Laisha's degree manual on Soil Science for Sustainability and on university extension guidance from several countries, walks through it line by line.
December and January suit soil sampling in many places: after the winter-crop harvest in the southern hemisphere, and ahead of spring planting in the north wherever the ground is not frozen. The rule that matters most is to sample at the same time of year each time, so one test can be compared with the next.
Step one: a sample the laboratory can trust
A laboratory tests a few grams of soil. That few grams has to stand for a whole field, so the way the sample is taken matters more than anything that happens in the laboratory. Penn State Extension and Oregon State University Extension give the same core advice:
A sample taken from one corner, or from the spot where the trailer always stands, will give a precise answer to the wrong question. Laisha's own question bank puts it simply: composite many cores from a zigzag pattern, avoiding unusual spots.
Step two: pH, the master number
Soil pH measures how acid or alkaline the soil is. North Carolina State University Extension explains the scale: 7.0 is neutral, values below 7 are acid and above 7 alkaline, and each whole unit is a tenfold change. A soil at pH 5 is ten times more acid than one at pH 6.
pH matters because it controls how available most nutrients are, how active soil life is and whether some elements, such as aluminium in very acid soils, reach toxic levels. The target depends on the crop and the region. Many extension services aim for about 6.0 to 7.0 for most field crops; Midwestern US guidance cited by NC State aims for 6.5 to 7.0, while North Carolina's recommendation for its mineral soils is 5.8 to 6.2. Oregon State notes that most crops grow well between about 6.0 and 8.2. Use your own country's target for your crop.
Liming raises pH: Oregon State's guide describes applying calcium carbonate, limestone, to increase it. How much lime a field needs is not set by pH alone. As the manual explains, a clay soil needs more lime than a sand at the same pH, because clay and organic matter hold more reserve acidity, which is why many laboratories report a separate buffer pH or lime requirement.
Organic matter
Organic matter, OM on the report, is the decomposed remains of plants, animals and soil organisms. It holds water and nutrients, feeds soil life and helps soil crumbs stick together. Penn State gives 2 to 5 per cent as a good target for its clay field soils. Oregon State adds a useful dose of realism: a soil with 2 per cent organic matter will not rise to 10 per cent under normal farming. Organic matter changes slowly, so it is a number to follow over years, not to chase in one season.
CEC, the soil's nutrient store
Cation exchange capacity, CEC, measures how many positively charged nutrients, such as calcium, magnesium and potassium, the soil can hold on its clay and organic matter. Penn State gives typical values in milliequivalents per 100 grams of about 1 to 5 for sands and more than 30 for clays. Oregon State's guide puts it simply: soils high in clay or organic matter have a high CEC; sandy, low-organic-matter soils have a low CEC.
What CEC tells you in practice: a low-CEC sandy soil holds little in reserve, so nutrients are better applied in smaller, more frequent doses, and it needs less lime to change its pH. A high-CEC clay holds more and changes more slowly. One cmol(+)/kg, the unit some laboratories use, is the same number as one meq per 100 grams.
EC: salt
Electrical conductivity, EC, measures dissolved salts. Reports may give it in millimhos per centimetre or decisiemens per metre; Oregon State notes that the two are the same. On its saturated-paste test, Oregon State rates an EC below 1.0 as suitable for most crops, 1.0 to 2.5 as marginal and above 2.5 as poor for many crops. Salt matters most in irrigated fields in dry climates, where water evaporates and leaves its salts behind. A rising EC from one test to the next is a warning to check irrigation water quality and drainage, and to plan some extra water to wash salts below the roots.
Nitrogen, phosphorus and potassium
Nitrogen is the hardest nutrient to judge from a soil test. Oregon State's guide explains that a test measures nitrate and ammonium at the moment of sampling but does not reflect future conditions, because nitrogen moves and changes with rain, temperature and soil life. Many laboratories therefore base nitrogen advice on the crop, the yield target and the previous crop, and use soil nitrate tests only at particular times and places.
Phosphorus is tested by several different methods, and their numbers are not interchangeable. The University of Minnesota Extension explains that the Bray-P1 test works well for soils of pH 7.4 or less and the Olsen test for soils of pH 7.4 or more, that some tests correlate well with each other and some do not, and that Mehlich-3 phosphorus measured by one instrument needs its own set of correlations. So a phosphorus figure means nothing until you know the method, and a recommendation must use interpretations calibrated for that method. If you change laboratories, ask which method they use; Oregon State advises contacting the laboratory that did the analysis when in doubt.
Potassium, calcium, magnesium and sodium are usually reported as exchangeable amounts, and are more stable from year to year than nitrogen.
Low, medium, high: what the categories mean
Most reports put each nutrient into a band. Oregon State's interpretation guide explains them in terms a farmer can act on. Low means that adding the nutrient will likely increase growth and yield. High means that adding more will likely not. The band in the middle is a "maybe": the crop might respond, depending on season and management. The aim is not the highest possible number but enough, and money saved on a nutrient already at a high level can go where it will pay.
What about the "ideal ratio" of calcium to magnesium?
Some advisers recommend balancing calcium, magnesium and potassium to an ideal ratio, sometimes called the base cation saturation ratio. Iowa State University Extension is blunt: the calcium to magnesium ratio concept is unproven and should not be used as a basis for fertilisation or liming. The UK's AHDB reaches the same view, noting that the evidence relating specific cation ratios to crop productivity is inconsistent and that plants do well over a broad range of ratios as long as there is enough potassium. Oregon State notes that base saturation is not needed for lime or fertiliser recommendations. A report that asks you to buy products to reach an ideal ratio deserves a second opinion.
How often?
Penn State's rule of thumb is to test sandy soils every two to three years and clay soils every three to four years; Oregon State suggests every two to three years for annual crops, pastures and legumes and every three to five for trees, berries and grapes. Test at the same season each time, keep every report, and write the results into your field records. The trend tells you more than any single test.
Test, don't guess. A soil test turns a fertiliser bill into a decision.
Laisha's Soil Test Interpreter, part of Laisha Smarter, reads a laboratory report you upload and turns it into a fertiliser plan; the free soil science notes on laisha.ai explain every term used here.
Read the full manual
laisha.ai/degrees/sustainability/soil-science-for-sustainabilitySoil Science for Sustainability: soil testing, soil reaction, CEC and soil health.