LAISHA
Open Laisha

Farm Machinery Training & Testing Institutes Engineering Drawing, Graphics & CAD: practice questions

Farm Machinery Training & Testing Institutes (Budni, Hisar, Anantapur, Biswanath Chariali) · India · Ministry of Agriculture & Farmers Welfare, Government of India

Original practice questions written to the published syllabus · not past papers
10worked here, free
27written to this exam in this subject
7syllabus units

About Farm Machinery Training & Testing Institutes

Farm Machinery Training & Testing Institutes (Budni, Hisar, Anantapur, Biswanath Chariali) is a professional certification run by Ministry of Agriculture & Farmers Welfare, Government of India, for candidates in India. Not an exam: short training courses and machinery testing (commercial, batch, confidential, CMVR).

Official site: nerfmtti.nic.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Engineering Drawing, Graphics & CAD in Farm Machinery Training & Testing Institutes

Reading and making drawings of machine parts and buildings, by hand and in CAD.

Our 27 Farm Machinery Training & Testing Institutes questions in this subject: 9 easy, 10 medium, 8 hard, across 7 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Farm Machinery Training & Testing Institutes and are not shown on any other exam's page.

Question 1 · easy

A dimension is given as 50 +0.05 / −0.02 mm. What are the upper limit, lower limit and tolerance?

  1. 50.05 mm, 49.98 mm, 0.03 mm
  2. 50.05 mm, 49.98 mm, 0.07 mm
  3. 50.05 mm, 50.02 mm, 0.03 mm
  4. 50.02 mm, 49.95 mm, 0.07 mm
Answer and working

B. 50.05 mm, 49.98 mm, 0.07 mm

Upper = 50 + 0.05 = 50.05; lower = 50 − 0.02 = 49.98; tolerance = 50.05 − 49.98 = 0.07 mm. 0.03 mm subtracts the deviations instead of spanning them.

Question 2 · easy

On a surface texture symbol, what does a horizontal bar closing the basic tick symbol indicate?

  1. Material removal by machining is required
  2. The surface must be painted after machining
  3. Any production process may be used
  4. Material removal is not permitted
Answer and working

A. Material removal by machining is required

The bar closing the symbol requires material removal. A circle inside the symbol prohibits removal (leave as cast, forged or rolled). The basic open symbol alone allows any process.

Question 3 · medium

An old drawing of a bearing seat specifies roughness grade N7. What Ra value does this correspond to?

  1. 0.8 µm
  2. 1.6 µm
  3. 3.2 µm
  4. 7 µm
Answer and working

B. 1.6 µm

The N grades double Ra at each step: N6 = 0.8, N7 = 1.6, N8 = 3.2 µm. N7 is not 7 µm; the number is a grade, not a value. The N grades are no longer in the current ISO standard but remain on many legacy drawings.

Question 4 · easy

The lateral surface of a cylindrical duct of diameter 200 mm and length 500 mm is to be cut from flat sheet. Ignoring the seam allowance, what are the dimensions of the development?

  1. A rectangle 314.2 mm × 500 mm
  2. A rectangle 628.3 mm × 500 mm
  3. A rectangle 200 mm × 500 mm
  4. A rectangle 1256.6 mm × 500 mm
Answer and working

B. A rectangle 628.3 mm × 500 mm

A cylinder develops by the parallel-line method into a rectangle whose length is the circumference πD = π × 200 = 628.3 mm and whose width is the height. Using the diameter or the radius (πD/2) leaves the duct unable to close; 2πD uses the diameter in place of the radius.

Question 5 · hard

A right square pyramid has a base side of 60 mm and a vertical height of 80 mm. In its development, what is the true length of each slant edge?

  1. 90.6 mm
  2. 100.0 mm
  3. 85.4 mm
  4. 80 mm
Answer and working

A. 90.6 mm

The slant edge runs from the apex to a corner, which is half the base diagonal from the axis: 60√2/2 = 42.43 mm. So edge = √(80² + 42.43²) = 90.6 mm. √(80² + 30²) = 85.4 mm is the slant height of a face (apex to mid-side), not the edge. Using the full 60 mm base side as the horizontal offset gives √(80² + 60²) = 100.0 mm.

Question 6 · easy

Which key allows a hub to slide axially along a shaft while still transmitting torque?

  1. Sunk taper key
  2. Saddle key
  3. Feather key
  4. Gib-head key
Answer and working

C. Feather key

A feather (parallel) key is fixed to the shaft or hub and permits axial sliding. A taper key and gib-head key lock the hub axially by wedging; a saddle key relies on friction and cannot slide reliably under torque.

Question 7 · easy

On an assembly drawing, what is the purpose of the numbered circles (balloons) attached to the parts by leaders?

  1. They indicate the welds to be inspected
  2. They give each part an item number that refers to the parts list
  3. They mark the parts that need lubrication
  4. They show the order of machining operations
Answer and working

B. They give each part an item number that refers to the parts list

Balloons carry item numbers that link each part to its line in the parts list (bill of materials), which gives name, material, quantity and drawing or standard number. Operation sequence, weld inspection and lubrication are given elsewhere.

Question 8 · easy

Which dimensions does an assembly drawing normally carry?

  1. Only assembly and installation dimensions, such as overall size
  2. Every dimension of every part, so that no detail drawings are needed
  3. No dimensions at all, because assembly drawings are only pictures
  4. Only the tolerances, with the basic sizes left to the detail drawings
Answer and working

A. Only assembly and installation dimensions, such as overall size

Detail drawings fully define each part; the assembly drawing shows how parts fit and gives overall, mounting and critical assembly dimensions. Duplicating every detail dimension invites conflict.

Question 9 · hard

A hub bore is drawn as ⌀35 H7 and the matching shaft as ⌀35 p6. During a field repair the mechanic finds the hub slides on by hand. What is the most likely conclusion?

  1. The fit is correct, because all H7 fits allow assembly by hand
  2. The fit is correct, because H7/p6 is a running clearance fit for hubs on shafts
  3. The drawing is wrong, because H and p cannot be combined
  4. A part is out of tolerance, since H7/p6 is meant to be an interference fit
Answer and working

D. A part is out of tolerance, since H7/p6 is meant to be an interference fit

In standard textbook use H7/p6 is a light press (interference) fit, so a hand-sliding hub indicates a worn shaft, an oversize bore or a wrong part. H7/g6 would be a sliding clearance fit. H can be combined with any shaft letter in the hole-basis system.

Question 10 · easy

In an exploded pictorial view in a spare-parts catalogue, how are the parts arranged?

  1. Grouped by material, with all steel parts together
  2. Arranged in order of their part numbers from left to right
  3. Separated along their assembly axes, in the order in which they fit together
  4. Stacked by size, with the largest part at the bottom
Answer and working

C. Separated along their assembly axes, in the order in which they fit together

Exploded views move parts apart along the lines of assembly so that the order and relationship are clear; item numbers then refer to the parts list.

A study plan for Engineering Drawing, Graphics & CAD in Farm Machinery Training & Testing Institutes

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (70% of the 27 questions): Assembly drawings of farm-machine parts (8, 30%); Fasteners and their drawing (6, 22%); Dimensioning and tolerances (5, 19%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Sectional views (5, 19%); 2D and 3D CAD modelling (1, 4%); Geometric dimensioning and tolerancing basics (1, 4%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Isometric projection (1, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: 2D and 3D CAD modelling (1 hard of 1), Sectional views (3 hard of 5), Assembly drawings of farm-machine parts (2 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Fasteners and their drawing (3 easy of 6); Dimensioning and tolerances (2 easy of 5).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Farm Machinery Training & Testing Institutes Engineering Drawing, Graphics & CAD

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.