ICAR AIEEA-PG Emerging & Non-thermal Dairy Processing: practice questions
ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
23written to this exam in this subject
8syllabus units
About ICAR AIEEA-PG
ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 2 hours, 120 multiple-choice questions, +4 for a correct answer and −1 for a wrong one (2026 bulletin). One paper per major subject group.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Emerging & Non-thermal Dairy Processing in ICAR AIEEA-PG
Alternatives and additions to heat: high pressure, pulsed electric fields, ultrasound, ohmic and microwave heating, irradiation, carbonation and hurdle technology.
Our 23 ICAR AIEEA-PG questions in this subject: 8 easy, 15 medium, 0 hard, across 8 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
Question 1 · easy
Which hurdle mainly preserves sweetened condensed milk?
Low pH from lactic fermentation
Nisin from starter bacteria
Low water activity from high sugar
High oxygen in the can
Answer and working
C. Low water activity from high sugar
High sucrose lowers aw so that most bacteria cannot grow.
Question 2 · medium
How does high pressure pretreatment of cheese milk typically affect rennet curd?
No curd forms at all
A softer gel with lower yield always
The milk becomes UHT-like and unrennetable
Firmer gel and higher yield
Answer and working
D. Firmer gel and higher yield
Smaller micelles and denatured β-lactoglobulin retained in the curd raise firmness and yield.
Question 3 · easy
Which process can turn cheese pieces into crunchy puffed snacks?
Cold plasma
Microwave-vacuum drying
UV-C treatment
Ohmic heating in brine
Answer and working
B. Microwave-vacuum drying
Rapid internal vapour generation under vacuum puffs the cheese.
Question 4 · medium
Which treatment of milk was authorised in the EU in 2016 to raise vitamin D?
Gamma irradiation of raw milk
Cold plasma on butter
UV light on pasteurised milk
Ohmic heating of cream
Answer and working
C. UV light on pasteurised milk
UV converts 7-dehydrocholesterol to vitamin D3.
Question 5 · easy
Which raw milk spoilage organisms does dissolved CO2 inhibit most?
Lactic acid bacteria
Psychrotrophs such as Pseudomonas
Thermophilic spore-formers
Bacteriophages
Answer and working
B. Psychrotrophs such as Pseudomonas
Aerobic Gram-negative psychrotrophs are sensitive; lactic acid bacteria are tolerant.
Question 6 · medium
Why is CO2 more effective in chilled products?
Bacteria absorb more CO2 when warm
Its solubility rises at low temperature
It reacts with ice crystals to form acid
CO2 is insoluble above 0 °C
Answer and working
B. Its solubility rises at low temperature
Henry's law: more gas dissolves at lower temperature.
Question 7 · medium
How is CO2 added to raw milk mostly removed before sale?
It stays in the milk as a permitted preservative
By freezing the milk
By adding sodium hydroxide
By heating and vacuum degassing in processing
Answer and working
D. By heating and vacuum degassing in processing
Degassing removes most dissolved CO2.
Question 8 · easy
Which microencapsulation method is most widely used industrially?
Spray drying
Complex coacervation
Liposome formation
Supercritical expansion
Answer and working
A. Spray drying
Spray drying of emulsions is cheap and scalable.
Question 9 · medium
Why is fish oil encapsulated before adding it to milk or yoghurt?
To prevent oxidation and mask fishy flavour
To make it soluble in water without emulsifier
To raise its melting point above 100 °C
To convert omega-3 into omega-6 fatty acids
Answer and working
A. To prevent oxidation and mask fishy flavour
Wall materials protect against oxygen and keep the oil from reaching the palate.
Question 10 · medium
Why does processed cheese print well?
It melts on heating and sets on cooling
It is a powder that sinters in a laser
It sets by rennet action in the nozzle
It never changes viscosity with temperature
Answer and working
A. It melts on heating and sets on cooling
Thermal reversibility allows extrusion warm and setting on the plate.
A study plan for Emerging & Non-thermal Dairy Processing in ICAR AIEEA-PG
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (65% of the 23 questions): 3D printing and other new formats (5, 22%); Carbonation and carbon dioxide to extend shelf life (5, 22%); Microencapsulation and nanotechnology (5, 22%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Hurdle technology (3, 13%); Ultrasound in processing and cleaning (2, 9%); High pressure processing (1, 4%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Irradiation and UV-C treatment of milk (1, 4%); Ohmic, microwave, radio-frequency and infrared heating (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Ohmic, microwave, radio-frequency and infrared heating (1 easy of 1); 3D printing and other new formats (2 easy of 5).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.