ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papersICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 2 hours, 120 multiple-choice questions, +4 for a correct answer and −1 for a wrong one (2026 bulletin). One paper per major subject group.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Group 18 Unit II: equipment for steam generation, compressed air, refrigeration, water and wastewater treatment, and energy audit; group 17 Unit III: thermodynamics and electrical engineering fundamentals.
Steam, water, compressed air and electricity in the milk plant, and how to audit and cut energy and water use.
Our 48 ICAR AIEEA-PG questions in this subject: 18 easy, 30 medium, 0 hard, across 10 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
A boiler produces 2,000 kg of steam while burning 140 kg of oil. What is its evaporation ratio?
B. 14.3
Evaporation ratio = steam ÷ fuel = 2,000 ÷ 140 = 14.3 kg of steam per kg of fuel.
The power factor of a 400 kW load is raised from 0.8 to 0.95. What is the new apparent power?
A. 421 kVA
New kVA = 400 ÷ 0.95 = 421 kVA, down from 500. 380 multiplies; 475 applies the PF to the old kVA.
A pump delivers 100 m³/h at 1,450 rpm. By the affinity laws, what flow does it give at 1,160 rpm?
C. 80 m³/h
Flow ∝ speed: 100 × 1,160 ÷ 1,450 = 80 m³/h. 64 and 51 apply the square and cube laws.
A heat pump delivers 300 kW of heat using 75 kW of electricity. What is its heating COP?
B. 4.0
Heating COP = 300 ÷ 75 = 4.0. 3.0 would be the cooling COP (225 ÷ 75).
In which boiler do hot combustion gases pass through tubes surrounded by water?
A. Fire-tube boiler
Shell or fire-tube boilers carry gases in tubes inside a water-filled shell.
What does a boiler economiser do?
A. Heats feed water with flue gas
Recovering flue gas heat into feed water lowers stack temperature and raises efficiency.
Why are chlorides in process water a concern in dairies?
A. They pit and crack stainless steel
Chloride attacks the passive layer, causing pitting and stress corrosion cracking, worse when hot.
How is power factor defined?
A. kW ÷ kVA
Power factor = real power ÷ apparent power = cos φ.
What is the typical methane content of biogas from dairy effluent?
D. 60–70%
The rest is mainly CO₂ with traces of H₂S and water vapour.
What does 'fit-for-purpose' mean in water reuse?
C. Matching quality to use
Each recovered stream is treated and monitored to match the quality its use needs.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.