LAISHA
Open Laisha

GATE ES Life Cycle Assessment: practice questions

GATE — Environmental Science and Engineering (ES) · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
48written to this exam in this subject
13syllabus units

About GATE ES

GATE — Environmental Science and Engineering (ES) is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks (15 General Aptitude + 85 subject). MCQ, MSQ and NAT question types with negative marking on MCQ only, as in all GATE papers.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Life Cycle Assessment in GATE ES

Definitions and the ISO 14040/14044 phases, functional unit and system boundary, mandatory versus optional LCIA elements, midpoint versus endpoint, allocation hierarchy and simple numerical work: characterisation sums with given GWPs, functional-unit conversions, allocation shares. Expect one-step MCQ and NAT items.

Quantifying the environmental impacts of a product from cradle to grave under ISO 14040 and 14044: goal and scope, inventory, impact assessment and interpretation, with the agricultural complications of multifunctionality, land use and biogenic carbon.

Our 48 GATE ES questions in this subject: 22 easy, 24 medium, 2 hard, across 13 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE ES and are not shown on any other exam's page.

Question 1 · medium

Which of the following is NOT one of the items ISO 14044 requires the goal of an LCA to state?

  1. The intended application of the study
  2. The intended audience to whom results will be communicated
  3. Whether results are to be used in comparative assertions disclosed to the public
  4. The impact assessment method and software to be used
Answer and working

D. The impact assessment method and software to be used

The goal states the intended application, the reasons, the intended audience and whether a public comparative assertion is intended. The impact assessment method belongs to the scope, and ISO does not ask for a software tool to be named in the goal.

Question 2 · hard

In the matrix formulation of LCA, how is the scaling vector s that delivers the final demand f obtained?

  1. By multiplying the intervention matrix B by the final demand f directly, s = B·f
  2. By solving A·s = f, that is s = A⁻¹·f, where A is the technology matrix
  3. By multiplying the characterisation matrix Q by the inventory vector, s = Q·g
  4. By adding the columns of the technology matrix A and dividing by the demand f
Answer and working

B. By solving A·s = f, that is s = A⁻¹·f, where A is the technology matrix

The technology matrix A holds intermediate flows per unit of each process; solving A·s = f gives the scaling factors s. The inventory is then g = B·s, where B is the intervention matrix, and impacts are h = Q·g. B·f skips the scaling step and Q·g is the impact step.

Question 3 · easy

According to ISO 14044, what is the first-preferred way to handle a multifunctional process?

  1. Allocate burdens in proportion to the economic value of the co-products
  2. Allocate burdens in proportion to the mass of each co-product
  3. Avoid allocation by subdividing the process or by expanding the system
  4. Assign all burdens to the co-product with the largest output
Answer and working

C. Avoid allocation by subdividing the process or by expanding the system

Step 1 of the ISO 14044 hierarchy is to avoid allocation, by dividing the unit process into sub-processes or by system expansion. Physical-relationship allocation (which may be mass) is step 2 and economic allocation is step 3; giving everything to the main product is not an ISO option.

Question 4 · medium

Crushing soybeans yields 0.79 kg meal (price 0.40 per kg) and 0.19 kg oil (price 1.00 per kg) per kg of beans. What share of the crushing burden goes to the oil under economic allocation?

  1. 19.4 %
  2. 62.5 %
  3. 37.5 %
  4. 71.4 %
Answer and working

C. 37.5 %

Revenue: meal 0.79 × 0.40 = 0.316; oil 0.19 × 1.00 = 0.190; oil share = 0.190/0.506 = 37.5 %. 19.4 % is the mass share; 62.5 % is the meal's economic share; 71.4 % uses unit prices alone without quantities.

Question 5 · easy

A crop yields 4.0 t/ha in one year. What is its land occupation per kilogram?

  1. 0.25 m²·yr per kg
  2. 2.5 m²·yr per kg
  3. 25 m²·yr per kg
  4. 4.0 m²·yr per kg
Answer and working

B. 2.5 m²·yr per kg

Occupation = 10000 m² × 1 yr / 4000 kg = 2.5 m²·yr per kg. 0.25 and 25 are factor-of-ten slips in converting hectares to square metres; 4.0 simply restates the yield.

Question 6 · easy

Under the '−1/+1' approach to biogenic carbon, how are uptake and release of biogenic CO2 characterised?

  1. Uptake and release are both counted as zero, assuming they balance
  2. Uptake is counted as +1 and release as −1 kg CO2-eq per kg CO2
  3. Uptake −1, release +1 kg CO2-eq per kg CO2
  4. Only uptake is counted, and release of biogenic CO2 is ignored
Answer and working

C. Uptake −1, release +1 kg CO2-eq per kg CO2

The −1/+1 approach makes the biogenic balance explicit: removals are negative and emissions positive, so storage or release as methane shows up. The zero-zero option is the 0/0 (carbon-neutral) convention; the other two reverse or omit flows.

Question 7 · easy

A kilogram of dry wood contains 50 % carbon by mass. How much atmospheric CO2 did the tree take up to build it?

  1. 1.83 kg CO2
  2. 0.50 kg CO2
  3. 3.67 kg CO2
  4. 0.14 kg CO2
Answer and working

A. 1.83 kg CO2

Carbon = 0.50 kg; CO2 = 0.50 × 44/12 = 1.83 kg. 0.50 is the carbon itself; 3.67 assumes the wood is pure carbon; 0.14 inverts the molar-mass ratio.

Question 8 · easy

If raising an emission factor by 20 % raises a product's carbon footprint by 6 %, what is the sensitivity coefficient?

  1. 3.33
  2. 0.30
  3. 0.06
  4. 1.20
Answer and working

B. 0.30

Sensitivity coefficient = relative change in output / relative change in input = 6 % / 20 % = 0.30. 3.33 inverts the ratio; 0.06 is the output change alone; 1.20 is the input multiplier.

Question 9 · easy

Which pair is a classic example of a multifunctional process in agriculture?

  1. A tractor consuming diesel and lubricant
  2. A greenhouse heated by gas and lit by electricity
  3. A dairy herd producing milk and meat
  4. A truck carrying grain and returning empty
Answer and working

C. A dairy herd producing milk and meat

A dairy herd delivers two products, milk and meat from culled cows and calves, which share burdens. The other examples have several inputs or a return trip but a single function.

Question 10 · medium

Which characterisation unit belongs to the acidification category in problem-oriented (CML-type) methods?

  1. kg SO2-equivalent
  2. kg PO4-equivalent
  3. kg CFC-11-equivalent
  4. kg 1,4-DCB-equivalent
Answer and working

A. kg SO2-equivalent

Acidification is expressed in kg SO2-eq. kg PO4-eq is eutrophication, CFC-11-eq is ozone depletion and 1,4-dichlorobenzene-eq is a toxicity unit in CML-type methods.

A study plan for Life Cycle Assessment in GATE ES

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (69% of the 48 questions): Climate change, eutrophication, acidification, water and land-use categories (8, 17%); Goal and scope: functional unit, system boundary, cut-off (7, 15%); Life cycle impact assessment methods and midpoint and endpoint indicators (7, 15%); Life cycle inventory: foreground and background data (6, 13%); Allocation and system expansion for multifunctional processes (5, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Life cycle thinking and the ISO 14040/14044 framework (4, 8%); Biogenic carbon and land-use change in LCA (2, 4%); Environmental product declarations and critical review (2, 4%); Interpretation, sensitivity and uncertainty analysis (2, 4%); Social LCA and life cycle costing (2, 4%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Agricultural LCA: field emissions models and databases (1, 2%); Attributional versus consequential LCA (1, 2%); Carbon footprint of products (ISO 14067) and PEF (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Life cycle inventory: foreground and background data (1 hard of 6), Climate change, eutrophication, acidification, water and land-use categories (1 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Biogenic carbon and land-use change in LCA (2 easy of 2); Interpretation, sensitivity and uncertainty analysis (2 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE ES Life Cycle Assessment

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.