LAISHA
Open Laisha

GATE ES Solid & Hazardous Waste Management: practice questions

GATE — Environmental Science and Engineering (ES) · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
34written to this exam in this subject
13syllabus units

About GATE ES

GATE — Environmental Science and Engineering (ES) is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks (15 General Aptitude + 85 subject). MCQ, MSQ and NAT question types with negative marking on MCQ only, as in all GATE papers.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Solid & Hazardous Waste Management in GATE ES

Municipal, hazardous, biomedical, plastic and electronic waste: generation, collection, processing, energy recovery and landfills. Crop residue and manure handling are taught in the Agricultural Engineering subject waste-management-environmental-engg and livestock-farm waste in the Veterinary subject environmental-hygiene; this subject is the general waste-management science they draw on.

Our 34 GATE ES questions in this subject: 18 easy, 13 medium, 3 hard, across 13 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE ES and are not shown on any other exam's page.

Question 1 · easy

A 1.0 kg waste sample weighs 0.45 kg after oven drying. What is its moisture content on a wet basis?

  1. 5.5%
  2. 122%
  3. 55%
  4. 45%
Answer and working

C. 55%

(wet - dry)/wet = 0.55 = 55%. Dividing by dry mass gives the dry-basis value 122%.

Question 2 · easy

Which resin identification code denotes PET?

  1. 7
  2. 1
  3. 5
  4. 3
Answer and working

B. 1

1 PET, 2 HDPE, 3 PVC, 4 LDPE, 5 PP, 6 PS, 7 other. PVC is 3, PP is 5 and 7 covers other plastics.

Question 3 · easy

During thermophilic composting, temperatures typically reach:

  1. About 5-10 degrees C
  2. About 55-65 degrees C
  3. About 100-120 degrees C
  4. About 200 degrees C
Answer and working

B. About 55-65 degrees C

Heat from microbial activity kills pathogens and weed seeds.

Question 4 · medium

A plant burns 1,000 t/d of waste with calorific value 8 MJ/kg at 22% electrical efficiency. What is its electrical output?

  1. 93 MW
  2. 20.4 MW
  3. 489 MW
  4. 0.0204 MW
Answer and working

B. 20.4 MW

1,000,000 kg x 8 MJ x 0.22 / 86,400 s = 20.4 MW. Omitting efficiency gives the thermal input; dividing by 3,600 confuses hours and seconds.

Question 5 · medium

A landfill receives 500 t/d of residual waste compacted to 0.85 t/m3, with cover soil adding 15% to volume. What volume is used each year?

  1. 246,912 m3
  2. 214,706 m3
  3. 676 m3
  4. 178,394 m3
Answer and working

A. 246,912 m3

500/0.85 x 1.15 = 676 m3/d; x 365 = 246,912. Omitting the cover allowance or multiplying by density gives the wrong volume.

Question 6 · hard

Using first-order decay, Q = k L0 M e^(-kt), with k = 0.05/yr, L0 = 100 m3 CH4/t and M = 100,000 t placed in one year, what is methane generation 5 years later?

  1. 500,000 m3/yr
  2. 389,400 m3/yr
  3. 7,788,008 m3/yr
  4. 642,013 m3/yr
Answer and working

B. 389,400 m3/yr

0.05 x 100 x 100,000 x e^-0.25 = 389,400. Omitting k gives the remaining potential, not the annual rate.

Question 7 · medium

A waste with pH 1.5 is hazardous under RCRA because it is:

  1. Infectious
  2. Corrosive
  3. Ignitable
  4. Reactive
Answer and working

B. Corrosive

Corrosivity: pH <= 2 or >= 12.5. Ignitability concerns flash point; reactivity concerns instability.

Question 8 · medium

Microplastics are plastic particles smaller than:

  1. 5 micrometres
  2. 5 mm
  3. 50 cm
  4. 5 cm
Answer and working

B. 5 mm

They are found in soils, water, air and food. 5 micrometres and 5 cm are wrong size limits.

Question 9 · easy

Global plastic production is now about:

  1. 4 million t/yr
  2. 40,000 t/yr
  3. 40 billion t/yr
  4. 400 million t/yr
Answer and working

D. 400 million t/yr

Most is packaging and short-lived products. Production is far larger than millions of tonnes and far smaller than tens of billions.

Question 10 · medium

Which convention addresses persistent organic pollutants?

  1. Rotterdam Convention
  2. Basel Convention
  3. Minamata Convention
  4. Stockholm Convention
Answer and working

D. Stockholm Convention

Basel covers hazardous waste trade; Rotterdam prior informed consent for chemicals; Minamata mercury.

A study plan for Solid & Hazardous Waste Management in GATE ES

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (47% of the 34 questions): Composting and vermicomposting of organic waste (4, 12%); Anaerobic digestion and biogas from organic waste (3, 9%); Collection, transfer and transport (3, 9%); Hazardous waste: characteristics, treatment and disposal (3, 9%); Material recovery and recycling (3, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: MSW sources, generation rates and characteristics (3, 9%); Sanitary landfill design, leachate and landfill gas (3, 9%); Thermal processes: incineration, pyrolysis, gasification (3, 9%); Biomedical waste management (2, 6%); Plastic waste and extended producer responsibility (2, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Waste hierarchy and integrated solid waste management (2, 6%); Waste management rules and their national equivalents (2, 6%); E-waste: hazards and resource recovery (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Collection, transfer and transport (1 hard of 3), Hazardous waste: characteristics, treatment and disposal (1 hard of 3), Sanitary landfill design, leachate and landfill gas (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: E-waste: hazards and resource recovery (1 easy of 1); Anaerobic digestion and biogas from organic waste (2 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE ES Solid & Hazardous Waste Management

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.