LAISHA
Open Laisha

NCEES FE Other Disciplines Engineering Mathematics: practice questions

NCEES FE Other Disciplines · USA · NCEES

Original practice questions written to the published syllabus · not past papers
10worked here, free
58written to this exam in this subject
16syllabus units

About NCEES FE Other Disciplines

NCEES FE Other Disciplines is a licensing and registration exam run by NCEES, for candidates in USA. Computer-based, 110 questions, 6-hour appointment (5 h 20 min exam).

Source: ncees.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Engineering Mathematics in NCEES FE Other Disciplines

About 8–12 mathematics questions answered with the NCEES FE Reference Handbook available on screen. Formulas are given, so the test is choosing and applying the right one quickly: derivatives and integrals, vector operations, differential equations, matrix operations and numerical methods such as Newton's method and the trapezoidal rule. Probability and statistics are a separate section of the exam.

The algebra, calculus, differential equations and numerical methods used in every numerical question of the degree. GATE AG gives it a fixed block of marks every year.

Our 58 NCEES FE Other Disciplines questions in this subject: 22 easy, 24 medium, 12 hard, across 16 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to NCEES FE Other Disciplines and are not shown on any other exam's page.

Question 1 · easy

What is the inverse of the 2×2 matrix [[4, 7], [2, 6]]?

  1. (1/38)[[6, −7], [−2, 4]]
  2. (1/10)[[6, 7], [2, 4]]
  3. (1/10)[[6, −7], [−2, 4]]
  4. (1/10)[[4, −7], [−2, 6]]
Answer and working

C. (1/10)[[6, −7], [−2, 4]]

det = 4·6 − 7·2 = 10. For [[a, b], [c, d]] the inverse is (1/det)[[d, −b], [−c, a]]: swap the diagonal and negate the off-diagonal. Forgetting to negate b and c gives [[6, 7], [2, 4]]; not swapping a and d gives [[4, −7], [−2, 6]]; adding instead of subtracting in the determinant gives 38.

Question 2 · medium

z = x²y with x = t² and y = t³. What is dz/dt at t = 1?

  1. 7
  2. 2
  3. 6
  4. 5
Answer and working

A. 7

Chain rule: dz/dt = (∂z/∂x)(dx/dt) + (∂z/∂y)(dy/dt) = (2xy)(2t) + (x²)(3t²). At t = 1, x = y = 1: 2·2 + 1·3 = 7. Check: z = t⁷, dz/dt = 7t⁶ = 7. Taking only one path gives 4 or 3; 5 and 6 come from adding exponents wrongly.

Question 3 · medium

The radius of a circular centre-pivot field is measured as 50 m with a possible error of 0.5 m. Using differentials, what is the approximate percentage error in the computed area?

  1. 0.5%
  2. 4%
  3. 1%
  4. 2%
Answer and working

D. 2%

A = πr², so dA/A = 2 dr/r = 2 × 0.5/50 = 0.02 = 2%. The relative error of rⁿ is n times the relative error of r. 1% forgets the factor 2 from the square; 4% squares the 2 as well.

Question 4 · easy

The p-series Σ 1/nᵖ (n = 1 to ∞) converges if and only if

  1. p ≥ 1
  2. p < 1
  3. p > 1
  4. p > 0
Answer and working

C. p > 1

By the integral test, ∫ dx/xᵖ from 1 to ∞ is finite only for p > 1. At p = 1 it is the harmonic series, which diverges, so p ≥ 1 is wrong. p > 0 only makes the terms tend to zero, which is not enough.

Question 5 · medium

Using the first three non-zero terms of the Maclaurin series, what is sin(0.2) (0.2 in radians)?

  1. 0.201336
  2. 0.198669
  3. 0.003490
  4. 0.197397
Answer and working

B. 0.198669

sin x = x − x³/3! + x⁵/5! − …: 0.2 − 0.008/6 + 0.00032/120 = 0.198669 (true value 0.198669). Dividing by 3 and 5 instead of 3! and 5! gives 0.197397; dropping the alternating sign gives 0.201336; 0.003490 is sin(0.2°), a degrees slip.

Question 6 · medium

Evaluate ∫₀¹ ∫₀ˣ xy dy dx.

  1. 1/8
  2. 1/2
  3. 1/6
  4. 1/4
Answer and working

A. 1/8

Inner: ∫₀ˣ xy dy = x·x²/2 = x³/2. Outer: ∫₀¹ x³/2 dx = 1/8. 1/4 comes from integrating y over 0 to 1 (wrong inner limit), giving ∫ x/2 dx = 1/4.

Question 7 · medium

What is a particular integral of y'' − 3y' + 2y = e^(3x)?

  1. −e^(3x)/2
  2. e^(3x)/2
  3. e^(3x)
  4. e^(3x)/20
Answer and working

B. e^(3x)/2

For e^(ax) with f(a) ≠ 0, PI = e^(ax)/f(a). f(m) = m² − 3m + 2, f(3) = 9 − 9 + 2 = 2, so PI = e^(3x)/2. 1/20 uses 9 + 9 + 2 (sign slip on −3m).

Question 8 · hard

Apply one Newton-Raphson step to x eˣ − 1 = 0 from x₀ = 0.5. What is x₁ (to 4 decimals)?

  1. 0.6065
  2. 0.4290
  3. 0.5710
  4. 0.5671
Answer and working

C. 0.5710

f(0.5) = 0.5e^0.5 − 1 = -0.17564; f'(x) = eˣ(1 + x), f'(0.5) = 2.47308. x₁ = 0.5 − (-0.17564)/(2.47308) = 0.5710. Using f' = eˣ (forgetting the product rule) gives 0.6065; 0.5671 is the converged root, not one step. 0.4290 adds the correction instead of subtracting it.

Question 9 · medium

Using the trapezoidal rule with h = 0.5, what is ∫₀¹ x² dx?

  1. 0.250
  2. 0.3333
  3. 0.375
  4. 0.750
Answer and working

C. 0.375

Points x = 0, 0.5, 1 → f = 0, 0.25, 1. T = (h/2)[f₀ + 2f₁ + f₂] = 0.25 × (0 + 0.5 + 1) = 0.375 (exact 1/3; the rule over-estimates a convex function). 0.750 forgets the h/2 and uses h; 0.3333 is the exact value, which Simpson's rule would give.

Question 10 · hard

A storm hydrograph at a watershed outlet is read every hour: 0, 5, 12, 8, 3 and 0 m³/s. Using the trapezoidal rule, what is the runoff volume?

  1. 100,800 m³
  2. 1,680 m³
  3. 28 m³
  4. 201,600 m³
Answer and working

A. 100,800 m³

h = 1 h = 3,600 s. V = (h/2)[Q₀ + Q₅ + 2(Q₁ + Q₂ + Q₃ + Q₄)] = 1,800 × 2 × 28 = 100,800 m³. Forgetting to convert hours to seconds gives 28; converting 1 h to 60 s gives 1,680; using h instead of h/2 doubles the result to 201,600 m³.

A study plan for Engineering Mathematics in NCEES FE Other Disciplines

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (48% of the 58 questions): Higher-order linear ordinary differential equations (5, 9%); Laplace transforms (5, 9%); Numerical integration: trapezoidal and Simpson's rules (5, 9%); Numerical solution of equations: bisection and Newton-Raphson (5, 9%); Limits, continuity and partial derivatives (4, 7%); Line, surface and volume integrals: Green, Stokes and Gauss theorems (4, 7%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Numerical solution of ODEs: Euler and Runge-Kutta methods (4, 7%); Partial differential equations: Laplace, heat and wave equations (4, 7%); Vector calculus: gradient, divergence and curl (4, 7%); First-order ordinary differential equations (3, 5%); Matrices, determinants and systems of linear equations (3, 5%); Maxima and minima of functions of several variables (3, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Sequences, series and convergence (3, 5%); Taylor, Maclaurin and Fourier series (3, 5%); Eigenvalues, eigenvectors and the Cayley-Hamilton theorem (2, 3%); Euler's theorem on homogeneous functions (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: First-order ordinary differential equations (3 hard of 3), Numerical integration: trapezoidal and Simpson's rules (3 hard of 5), Maxima and minima of functions of several variables (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Eigenvalues, eigenvectors and the Cayley-Hamilton theorem (2 easy of 2); Matrices, determinants and systems of linear equations (2 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — NCEES FE Other Disciplines Engineering Mathematics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.