NCEES FE Other Disciplines · USA · NCEES
Original practice questions written to the published syllabus · not past papersNCEES FE Other Disciplines is a licensing and registration exam run by NCEES, for candidates in USA. Computer-based, 110 questions, 6-hour appointment (5 h 20 min exam).
Source: ncees.org.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Probability and Statistics is its own area with 6–9 questions, answered with the FE Reference Handbook on screen, which supplies the formulas and the distribution tables. Expect descriptive statistics, probability distributions, expected value, confidence intervals, hypothesis tests, regression and goodness of fit. Speed in reading the right table and choosing sample versus population formulas matters more than memorising.
Describing data, probability distributions, regression and designed experiments, with the frequency analysis that hydrology and quality control rely on.
Our 60 NCEES FE Other Disciplines questions in this subject: 22 easy, 25 medium, 13 hard, across 8 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to NCEES FE Other Disciplines and are not shown on any other exam's page.
A tractor travels a 1 km headland road at 4 km/h and returns along the same 1 km at 6 km/h. What is its average speed for the round trip?
C. 4.8 km/h
Equal distances at different speeds call for the harmonic mean: 2/(1/4 + 1/6) = 4.8 km/h (total 2 km in 0.25 + 0.1667 = 0.4167 h). The arithmetic mean 5.0 km/h would be right only for equal times; 4.90 km/h is the geometric mean; 2.4 km/h is half the harmonic mean.
Events A and B are independent with P(A) = 0.4 and P(B) = 0.3. What is P(A ∪ B)?
B. 0.58
P(A ∩ B) = 0.4 × 0.3 = 0.12 for independent events, so P(A ∪ B) = 0.4 + 0.3 − 0.12 = 0.58. 0.70 treats them as mutually exclusive; 0.12 is the intersection; 0.46 subtracts the intersection twice.
A random variable X has probability density f(x) = kx² for 0 ≤ x ≤ 2 and zero elsewhere. What is E(X)?
B. 1.5
∫₀² kx² dx = 8k/3 = 1 gives k = 3/8. E(X) = ∫₀² x·(3/8)x² dx = (3/8)(2⁴/4) = 1.5. 1.0 is the midpoint of the range (the mean of a uniform variable); 1.333 is the mean for a density proportional to x (f = x/2) rather than x²; 2.0 is the upper limit.
The operating life of a filter element is exponentially distributed with mean 500 hours. A filter has already run 300 hours without failing. What is the probability that it lasts at least another 200 hours?
B. 0.6703
The exponential distribution is memoryless: P(T > 500 | T > 300) = P(T > 200) = e^(−200/500) = 0.6703. 0.3679 is P(T > 500) from new, ignoring the condition; 1.2214 divides the wrong way and exceeds 1; 0.3297 is the probability of failing within the next 200 h.
Sugarcane stalk mass has mean 12 N and standard deviation 3 N. For a random sample of 36 stalks, what is the probability that the sample mean exceeds 12.8 N? (Φ(1.6) = 0.9452.)
A. 0.0548
SE = σ/√n = 3/6 = 0.5 N. z = (12.8 − 12)/0.5 = 1.6. P(x̄ > 12.8) = 1 − 0.9452 = 0.0548. Using σ instead of the standard error gives z = 0.267 and 0.3949; 0.9452 is the lower area; 0.1096 doubles the tail.
A seed company claims 90 per cent germination. In a test of 200 seeds, 170 germinate. Testing H0: p = 0.90 against H1: p < 0.90 at the 5 per cent level (critical z = −1.645), what is the result?
C. z = -2.36; reject the claim
p̂ = 170/200 = 0.85. Under H0 the SE uses p0: √(0.9 × 0.1/200) = 0.02121. z = (0.85 − 0.90)/0.02121 = -2.36 < −1.645, so the claim is rejected. The 2.576 value belongs to a two-tailed 1 per cent test; a negative z is exactly what H1: p < 0.90 predicts, so it is compared with −1.645; omitting n from the SE gives -0.167; the test of a hypothesised p uses p0, not p̂, in the SE.
A fertiliser spreader specification requires the standard deviation of spread rate between trays to be no more than 0.40 kg/ha. Fifteen trays give s = 0.50 kg/ha. Testing H0: σ = 0.40 against H1: σ > 0.40 at 5 per cent (upper 5 per cent χ² for 14 df = 23.685), what is the conclusion?
B. χ² = 21.875; do not reject H0
χ² = (n − 1)s²/σ0² = 14 × 0.25/0.16 = 21.875 on 14 df. Since 21.875 < 23.685 (tabled 23.685), the evidence does not show σ exceeds 0.40. Using n = 15 gives 23.438, which crosses the critical value and wrongly rejects; using SDs instead of variances gives 17.500.
A calibration factor is stored in cell B1 of a spreadsheet and a formula in C2 multiplies A2 by it. When the formula is copied down to C3, C4 and so on, how should the reference to the calibration factor be written so that it does not move?
B. $B$1
The dollar signs make the column and row absolute, so every copied formula still points to B1. A plain B1 is relative and becomes B2, B3 … on copying; B$1$ is not valid notation; '=B1' is the start of a formula, not a type of reference.
An engineer writes a script that simulates 10,000 seasons of random rainfall to estimate the probability that a tank runs dry. Colleagues get slightly different answers each time they run it. What is the simplest step that makes the result exactly reproducible?
C. Fix the random number generator's seed in the script and record it
A fixed seed makes the pseudo-random sequence, and therefore the result, identical on every run. More simulations reduce the variation between runs but do not remove it; rounding hides it; computer speed is irrelevant.
A spreadsheet t-test function returns p = 0.03, and its help text says the value is one-tailed. The engineer needs a two-sided test at the 5 per cent level. What is the correct conclusion?
D. The two-tailed p-value is 0.06, so H0 is not rejected at 5 per cent
For a symmetric t distribution the two-tailed p-value is twice the one-tailed value: 2 × 0.03 = 0.06 > 0.05, so H0 is not rejected. Halving instead of doubling, or using the complement 0.97, are common slips; check which convention a function uses before reading its output.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.