ICAR AICE-JRF/SRF Advanced Dairy Engineering: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
100written to this exam in this subject
10syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Advanced Dairy Engineering in ICAR AICE-JRF/SRF
Graduate-level transport phenomena, process modelling, design and simulation for dairy processes, as examined in ICAR AICE subject 38.
Our 100 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 80 medium, 18 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
The Chilton–Colburn analogy states that:
Nu = 0.023 Re^0.8 Pr^0.4 for every geometry and flow regime
Sh = 2 for all spheres (stagnant fluid limit)
f = 64/Re in turbulent flow
j_H = St Pr^(2/3) = f/2
Answer and working
D. j_H = St Pr^(2/3) = f/2
It extends Reynolds' analogy to Pr and Sc different from one, linking friction to heat and mass transfer.
Question 2 · hard
A soft sensor for milk powder moisture in a dryer is usually based on:
Visual inspection of the powder colour by operators each hour
Feed fat content alone
Ambient noise
Calibrated heat and mass balances
Answer and working
D. Calibrated heat and mass balances
Exhaust humidity, temperatures and flows estimate moisture continuously.
Question 3 · hard
A key limitation of current spray dryer CFD is:
Agglomeration and collisions
An inability to model air flow at all inside large chambers
Ignoring gravity
Requiring no validation
Answer and working
A. Agglomeration and collisions
Agglomeration, fines return and drying kinetics remain uncertain and costly to model.
Question 4 · hard
Microwave tempering of frozen dairy blocks risks runaway heating because:
Ice absorbs microwaves more strongly than water
Liquid water absorbs microwaves more than ice
Fat freezes faster than water
Microwaves cool the surface
Answer and working
B. Liquid water absorbs microwaves more than ice
Thawed regions absorb more energy and heat faster, causing hot spots.
Question 5 · medium
A major difficulty when simulating dairy plants in general chemical simulators is:
A complete lack of unit operations such as heat exchangers and pumps
Inability to calculate mass balances
Missing dairy property data
No support for water as a component
Answer and working
C. Missing dairy property data
Users define pseudo-components and property correlations from dairy literature.
Question 6 · medium
A digital twin is a model that is:
Continuously updated with plant data
A copy of the plant built in another country
A static design drawing
A spreadsheet of costs only
Answer and working
A. Continuously updated with plant data
Data reconciliation and parameter estimation keep the model aligned with the plant.
Question 7 · medium
Data reconciliation in a digital twin:
Deletes all measurements that disagree with the design values
Adds fictitious streams to hide errors
Ignores sensor uncertainty completely
Adjusts data to close balances
Answer and working
D. Adjusts data to close balances
Measurements are corrected statistically so mass and energy balances close.
Question 8 · medium
Thin-walled evaporator bodies under vacuum must be designed mainly against:
Internal bursting at high pressure
Creep at 500 °C
Hydrogen embrittlement
Buckling
Answer and working
D. Buckling
External pressure causes buckling; stiffening rings shorten the effective length.
Question 9 · hard
Why must pasteurisation flow diversion not depend on a machine-learning model?
Safety functions need simple, validated logic
Machine learning cannot read temperature signals from sensors
Regulators ban computers in dairies
Models are too slow for any purpose
Answer and working
A. Safety functions need simple, validated logic
Protective functions stay in independent systems; advanced methods optimise within them.
Question 10 · medium
In dairy product life-cycle assessments, the largest share of emissions usually comes from:
Processing electricity
On-farm emissions
Packaging
Retail lighting
Answer and working
B. On-farm emissions
Enteric methane, manure and feed dominate; powders have larger processing shares.
A study plan for Advanced Dairy Engineering in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (40% of the 100 questions): Advanced control and machine learning in dairy plants (10, 10%); Fouling models and cleaning optimisation (10, 10%); Freezing and thawing models (10, 10%); Membrane process modelling (10, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Modelling of heat treatment and lethality (10, 10%); Pressure vessel and heat exchanger design codes (10, 10%); Process simulation software (10, 10%); Spray dryer modelling and computational fluid dynamics (10, 10%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Sustainability engineering: energy and water pinch analysis (10, 10%); Transport phenomena in dairy processes (10, 10%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Modelling of heat treatment and lethality (3 hard of 10), Advanced control and machine learning in dairy plants (2 hard of 10), Fouling models and cleaning optimisation (2 hard of 10).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Spray dryer modelling and computational fluid dynamics (1 easy of 10); Transport phenomena in dairy processes (1 easy of 10).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.