ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papersICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Subject 34 Unit 9 asks about quality systems, standards bodies (ISO, IDF, Codex, AOAC, BIS, FSSAI), traceability and laboratory accreditation; subject 36 Unit 6 asks about quality assurance of microbiological testing, rapid methods and their validation against reference methods. Expect definition items on QC versus QA, ISO 9001 and ISO/IEC 17025, control charts and sampling plans, proficiency testing scores and shelf-life determination.
Quality systems, statistical process control, sampling inspection and running an accredited dairy laboratory.
Our 90 ICAR AICE-JRF/SRF questions in this subject: 21 easy, 41 medium, 28 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Which statement best distinguishes quality assurance from quality control in a dairy?
A. QA builds a preventive system that gives confidence; QC detects nonconforming product
ISO 9000 defines quality control as the part of quality management focused on fulfilling requirements (inspection and test) and quality assurance as the part focused on providing confidence that they will be fulfilled (a planned, preventive system). Calling them the same thing, or assigning QC to certification bodies, confuses the terms.
Fill weights of 500 g cups are charted in subgroups of 5. The average range is 12 g. With D3 = 0 and D4 = 2.114, what is the upper control limit of the R chart?
D. 25.4 g
UCL = D4 × R̄ = 2.114 × 12 = 25.4 g; LCL = 0. 24.0 g doubles R̄; 36.0 g triples it; 6.9 g is A2 × R̄, which belongs to the X-bar chart.
Subgroups of 5 butter samples give an average moisture range of 0.93%. With d2 = 2.326, what is the estimated process standard deviation?
A. 0.40%
σ̂ = R̄/d2 = 0.93/2.326 = 0.40%. 0.19% divides by n = 5; 2.16% multiplies by d2; 0.31% divides by 3.
Why is a capability index calculated from data of an out-of-control process misleading?
C. An unstable process has no stable distribution to compare with the limits
Capability assumes a stable process so that its distribution predicts future output. With special causes present, the mean and spread change unpredictably, and the index describes nothing reliable. The specification itself does not change.
What is the correct sequence of 5S?
C. Sort, set in order, shine, standardise, sustain
5S runs sort, set in order, shine, standardise and sustain: remove what is not needed, give everything a place, clean, make the routine standard, then keep it up.
Which lean improvement most directly reduces milk solids lost to effluent at product changeovers?
C. Pigging lines and sequencing products from plain to flavoured
Pigging recovers product from pipes, and sequencing compatible products reduces flushes between runs, cutting both waste and changeover time. Extra stock, inspection or overspeeding add other wastes.
In ISO/IEC 17025:2017, impartiality and confidentiality are addressed in which clause?
C. Clause 4, general requirements
Clause 4 (general requirements) covers impartiality and confidentiality. Clause 6 covers personnel, facilities and equipment; clause 7 the testing process; clause 8 the management system.
Routine mid-infrared milk analysers used for payment are kept accurate mainly by:
D. Regular calibration against reference-method values on calibration milks
MIR instruments are indirect methods calibrated against reference methods (such as Röse-Gottlieb for fat and Kjeldahl for protein) using calibration milks, with slope and intercept checks (see ISO 9622 | IDF 141 and ISO 8196 | IDF 128). Lamp replacement or day-to-day comparison alone does not ensure accuracy.
A product's sensory score falls linearly (zero order) from 9.0 by 0.25 points per day, and the product is rejected below 6.0. What is its sensory shelf life?
B. 12 days
Zero order: t = (9.0 − 6.0)/0.25 = 12 days. 24 halves the rate; 36 uses the whole score from 9.0 to zero; 6 halves the time.
Why is accelerated shelf-life testing at 30–37 °C unreliable for chilled pasteurised milk?
C. The spoilage organisms at high temperature differ from those at chill
Raising temperature changes which micro-organisms grow and how, so the mechanism at 30 °C does not represent chill storage; real-time studies at the intended temperature are used instead. The other statements are false.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.