ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
42written to this exam in this subject
13syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Unit III names irradiation, microwave and solar processing of foods. MCQs test irradiation sources, doses and labelling, microwave frequencies and heating mechanisms, and basic HPP and PEF principles.
The newer ways to make food safe or change its structure with less heat damage: high-pressure processing, pulsed electric fields, ohmic, microwave and radio-frequency heating, irradiation, UV, cold plasma and ultrasound — their mechanisms, equipment, validation and regulatory status.
Our 42 ICAR AIEEA-PG / PGS questions in this subject: 25 easy, 16 medium, 1 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · easy
The weakness shared by most non-thermal methods is their limited effect on
yeasts in fruit juices
Gram-negative bacteria in milk
bacterial spores
insects in stored grain
Answer and working
C. bacterial spores
Spores resist pressure, PEF, UV and most other non-thermal treatments; low-acid shelf-stable foods still need heat.
Question 2 · medium
Field strengths used for PEF pasteurisation of juices are typically about
IR is absorbed in a thin surface layer; the interior heats by conduction.
Question 4 · easy
The unit of absorbed radiation dose is the
gray
becquerel
sievert per hour
electronvolt
Answer and working
A. gray
1 Gy = 1 J/kg; becquerel measures radioactivity.
Question 5 · easy
The radioactive isotope most used for food irradiation is
cobalt-60
uranium-235
carbon-14
iodine-131
Answer and working
A. cobalt-60
Co-60 emits gamma rays of 1.17 and 1.33 MeV; Cs-137 is used less.
Question 6 · easy
The international symbol used on irradiated foods is the
Möbius loop
Radura
glass-and-fork
Green Dot
Answer and working
B. Radura
The Radura is a stylised plant in a broken circle; the glass-and-fork marks food-contact materials.
Question 7 · easy
Cold plasma inactivates microorganisms mainly through
high pressure above 500 MPa applied by water
reactive oxygen and nitrogen species
heating to 121 °C
gamma radiation
Answer and working
B. reactive oxygen and nitrogen species
ROS, RNS, UV and charged particles damage membranes, proteins and DNA.
Question 8 · medium
High-frequency, low-intensity ultrasound is used in food plants mainly for
non-destructive measurement
sterilising cans
breaking emulsions
heating ovens
Answer and working
A. non-destructive measurement
MHz ultrasound measures composition, texture and processes without changing the food.
Question 9 · easy
Nisin is a
bacteriocin
synthetic dye
mineral salt
sugar alcohol
Answer and working
A. bacteriocin
Produced by Lactococcus lactis, it inhibits spore-forming bacteria in cheese and canned foods.
Question 10 · medium
Chemical treatments such as ozone, chlorine dioxide and peracetic acid are usually regulated as
packaging materials
novel foods requiring full authorisation in every country
food additives or processing aids
irradiation treatments
Answer and working
C. food additives or processing aids
Approvals specify permitted uses, concentrations and residues.
A study plan for Novel & Non-thermal Food Processing Technologies in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (60% of the 42 questions): Food irradiation: dose, sources, effects and labelling (7, 17%); High-pressure processing: principles, equipment and microbial inactivation (7, 17%); Ozone and other chemical non-thermal treatments (4, 10%); Ultraviolet light and pulsed light (4, 10%); Infrared and induction heating (3, 7%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Microwave and radio-frequency heating (3, 7%); Pulsed electric fields (3, 7%); Ultrasound in food processing (3, 7%); Why non-thermal processing: quality and consumer drivers (3, 7%); Cold plasma (2, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Ohmic heating (1, 2%); Regulatory approval of novel processes (1, 2%); Validation of novel processes and surrogate organisms (1, 2%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: High-pressure processing: principles, equipment and microbial inactivation (1 hard of 7).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Why non-thermal processing: quality and consumer drivers (3 easy of 3); Cold plasma (2 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.