LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Statistics, Experimental Design & Chemometrics for Food Science: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
64written to this exam in this subject
6syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Statistics, Experimental Design & Chemometrics for Food Science in ICAR AIEEA-PG / PGS

Probability, inference and the designs used in food research and quality work: factorial and response-surface designs for formulation and process optimisation, mixture designs, the statistics of sensory panels, and multivariate methods (PCA, PLS) used with spectra and chromatograms. Goes further than the general statistics subjects in Agricultural Engineering (probability-statistics-data) and Agribusiness (business-statistics) by focusing on food formulation, sensory and analytical data.

Our 64 ICAR AIEEA-PG / PGS questions in this subject: 24 easy, 28 medium, 12 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Why are aerobic plate counts usually converted to log10 values before means are calculated and tests are run?

  1. Log values are required by law for every microbiological result reported by a food laboratory worldwide
  2. Taking logs removes the dilution factor, so the count no longer depends on the volume that was plated
  3. Counts are right-skewed and close to log-normal, so logs give near-symmetric data with steadier variance
  4. Counts are left-skewed with a long lower tail, and logs stretch that tail so the outliers become visible
Answer and working

C. Counts are right-skewed and close to log-normal, so logs give near-symmetric data with steadier variance

Microbial counts vary multiplicatively and follow an approximately log-normal distribution; on the log scale they are near-symmetric and their variance is more stable, which suits means, t tests and ANOVA. Logs do not remove dilution factors, and counts are right-skewed, not left-skewed.

Question 2 · hard

A quality team claims that because individual pack weights are skewed, a t-based confidence interval for the mean weight from 50 packs is invalid. What is the best response?

  1. They are right: any skewness in single values makes every interval for the mean invalid at any sample size
  2. By the central limit theorem the mean of 50 values is close to normal, so the interval remains reasonable
  3. The interval is valid only if the skewed weights are first replaced by their ranks before averaging them
  4. The interval becomes exact once the sample standard deviation is replaced by the range divided by four
Answer and working

B. By the central limit theorem the mean of 50 values is close to normal, so the interval remains reasonable

The central limit theorem says the sampling distribution of the mean approaches normality as n grows, even when individual values are skewed; with n = 50 a t interval is usually adequate unless skew is extreme. Ranks change the quantity being estimated, and range/4 is a rough shortcut, not a correction.

Question 3 · easy

A fitted shelf-life model gives colour score y = 0.5 + 0.2x, where x is storage weeks. What colour score does it predict at 12 weeks?

  1. 2.4
  2. 8.4
  3. 3.4
  4. 2.9
Answer and working

D. 2.9

y = 0.5 + 0.2 × 12 = 0.5 + 2.4 = 2.9. 2.4 forgets the intercept; 8.4 multiplies (0.5 + 0.2) by 12; 3.4 adds 0.5 twice.

Question 4 · easy

Across 20 biscuit recipes, hardness and sweetness are strongly correlated. Both rise with sugar content. What does this show?

  1. Hardness causes sweetness, because a strong correlation demonstrates a direct causal effect
  2. Sugar, a shared cause, explains the correlation; hardness does not cause sweetness
  3. Sweetness causes hardness, because the sensory attribute must drive the instrumental one
  4. The correlation is spurious and must be zero once a larger number of recipes is tested
Answer and working

B. Sugar, a shared cause, explains the correlation; hardness does not cause sweetness

Correlation is not causation. Both attributes depend on sugar, a confounding variable, so they move together without either causing the other. Nothing suggests the correlation would vanish with more recipes.

Question 5 · medium

Why is adjusted R² preferred to R² when comparing regression models with different numbers of predictors?

  1. It is always larger than R², so it makes good models look better for publication purposes
  2. It removes the need to check residual plots, because it already corrects for non-linearity
  3. It penalises extra predictors, so adding a useless term does not raise it automatically
  4. It measures prediction error on new samples, so no separate validation set is needed at all
Answer and working

C. It penalises extra predictors, so adding a useless term does not raise it automatically

R² never falls when a predictor is added, even a useless one; adjusted R² includes a penalty for the number of terms. It is never larger than R², does not check residual patterns, and is not an independent validation statistic.

Question 6 · medium

A one-way ANOVA has a treatment sum of squares of 60 on 3 df and an error sum of squares of 80 on 16 df. What is the F statistic?

  1. 0.75
  2. 1.33
  3. 0.25
  4. 4.00
Answer and working

D. 4.00

MS treatment = 60/3 = 20; MS error = 80/16 = 5; F = 20/5 = 4.00. 0.75 is SS treatment / SS error without df; 1.33 inverts that; 0.25 inverts the correct F.

Question 7 · easy

Five new formulations are each compared with the current product, not with one another. Which procedure fits this aim?

  1. Tukey's HSD
  2. Scheffé's contrast test
  3. Kruskal-Wallis test
  4. Dunnett's test
Answer and working

D. Dunnett's test

Dunnett's test compares each treatment with a single control and is more powerful than all-pairs methods for that purpose. Tukey's covers every pair; Scheffé's covers all contrasts; Kruskal-Wallis is a rank-based overall test.

Question 8 · easy

Using a Bonferroni correction for 10 comparisons at an overall α of 0.05, what significance level is applied to each comparison?

  1. 0.05
  2. 0.005
  3. 0.5
  4. 0.0005
Answer and working

B. 0.005

Bonferroni divides α by the number of comparisons: 0.05/10 = 0.005. 0.05 applies no correction; 0.5 multiplies by 10; 0.0005 divides by 100.

Question 9 · easy

How many experimental units are needed for one replicate of a Latin square with 6 treatments?

  1. 12
  2. 6
  3. 18
  4. 36
Answer and working

D. 36

A Latin square has n rows and n columns with one unit per cell: 6 × 6 = 36. 12 adds rows and columns; 6 is one row; 18 is half the square.

Question 10 · hard

The same 60 consumers state whether they would buy a product before and after reading a health claim. Which test assesses the change in the proportion willing to buy?

  1. Chi-square test of independence on a 2 × 2 table treated as independent
  2. Mann-Whitney U test on the before and after answers
  3. Kruskal-Wallis test across the two occasions
  4. McNemar test on the discordant before-after pairs
Answer and working

D. McNemar test on the discordant before-after pairs

Before and after answers come from the same people, so the proportions are related; McNemar's test uses only the discordant pairs. An ordinary chi-square assumes independent samples.

A study plan for Statistics, Experimental Design & Chemometrics for Food Science in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (38% of the 64 questions): Descriptive statistics and probability distributions: binomial, Poisson and normal (12, 19%); Sampling distributions, confidence intervals and hypothesis tests: z, t, chi-square and F (12, 19%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Analysis of variance: one-way, two-way and multiple comparisons (10, 16%); Completely randomised, randomised block and Latin square designs (10, 16%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Correlation and linear and multiple regression (10, 16%); Non-parametric tests used with sensory data (10, 16%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Non-parametric tests used with sensory data (3 hard of 10), Analysis of variance: one-way, two-way and multiple comparisons (2 hard of 10), Completely randomised, randomised block and Latin square designs (2 hard of 10).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Analysis of variance: one-way, two-way and multiple comparisons (5 easy of 10); Descriptive statistics and probability distributions: binomial, Poisson and normal (5 easy of 12).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Statistics, Experimental Design & Chemometrics for Food Science

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.