LAISHA
Open Laisha

GATE XE Statistics, Experimental Design & Chemometrics for Food Science: practice questions

GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
34written to this exam in this subject
3syllabus units

About GATE XE

GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Statistics, Experimental Design & Chemometrics for Food Science in GATE XE

Probability, inference and the designs used in food research and quality work: factorial and response-surface designs for formulation and process optimisation, mixture designs, the statistics of sensory panels, and multivariate methods (PCA, PLS) used with spectra and chromatograms. Goes further than the general statistics subjects in Agricultural Engineering (probability-statistics-data) and Agribusiness (business-statistics) by focusing on food formulation, sensory and analytical data.

Our 34 GATE XE questions in this subject: 12 easy, 17 medium, 5 hard, across 3 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE XE and are not shown on any other exam's page.

Question 1 · medium

Four replicate determinations of sugar content gave 8, 10, 12 and 10 g per 100 g. What is the sample standard deviation (n − 1 denominator)?

  1. 1.41 g per 100 g
  2. 2.67 g per 100 g
  3. 1.63 g per 100 g
  4. 2.00 g per 100 g
Answer and working

C. 1.63 g per 100 g

Mean = 10; squared deviations 4, 0, 4, 0 sum to 8. Sample variance = 8/3 = 2.67; SD = √2.667 = 1.63. 1.41 uses n = 4 (the population formula), and 2.67 is the variance, not its square root.

Question 2 · easy

Nine replicate fat determinations have a standard deviation of 1.2 g per 100 g. What is the standard error of the mean?

  1. 0.40 g per 100 g
  2. 0.13 g per 100 g
  3. 3.60 g per 100 g
  4. 1.20 g per 100 g
Answer and working

A. 0.40 g per 100 g

SE = s/√n = 1.2/√9 = 1.2/3 = 0.40. Dividing by n instead of √n gives 0.13; multiplying by √n gives 3.6; 1.2 is the standard deviation of single values, not of the mean.

Question 3 · medium

In a triangle test the chance of a correct answer by guessing is 1/3. What is the probability that three independent assessors all pick the odd sample by chance alone?

  1. 0.037
  2. 0.333
  3. 0.111
  4. 0.125
Answer and working

A. 0.037

Independent events multiply: (1/3)³ = 1/27 = 0.037. 0.333 is one assessor; 0.111 is (1/3)², two assessors; 0.125 is (1/2)³, the chance level of a duo-trio or paired test, not a triangle test.

Question 4 · easy

Five pH readings are 6.4, 6.5, 6.5, 6.6 and 9.8, the last from a faulty electrode. Which measure of location is least affected by the faulty value?

  1. The arithmetic mean
  2. The range
  3. The median
  4. The standard deviation
Answer and working

C. The median

The median is the middle value (6.5) and ignores how extreme the outlier is. The mean is pulled up to 7.16; range and standard deviation are measures of spread, not location, and both are inflated by the outlier.

Question 5 · medium

Sixteen cans give a mean drained weight of 20.0 g per unit with s = 0.8 g. Using t(0.05, 15 df) = 2.131, what is the 95% confidence interval for the mean?

  1. 19.61 to 20.39 g
  2. 18.30 to 21.70 g
  3. 19.57 to 20.43 g
  4. 19.89 to 20.11 g
Answer and working

C. 19.57 to 20.43 g

SE = 0.8/√16 = 0.2; margin = 2.131 × 0.2 = 0.426; interval 19.57 to 20.43. Using z = 1.96 gives 19.61 to 20.39 (wrong with s estimated from 16 values); using s instead of the SE gives 18.30 to 21.70; dividing by n instead of √n gives an interval far too narrow.

Question 6 · easy

A quality manager rejects a batch that in fact meets specification, because a test was significant by chance. Which error is this?

  1. Type II error
  2. Sampling bias
  3. Measurement drift
  4. Type I error
Answer and working

D. Type I error

Rejecting a true null hypothesis (the batch is fine) is a type I error, with probability α. A type II error is accepting a bad batch. Bias and drift are systematic errors, not errors of a test decision.

Question 7 · hard

A product declares 3.0% fat. Nine units give a mean of 2.9% and s = 0.15%. Using a two-sided one-sample t test at α = 0.05 (critical t, 8 df = 2.306), what is the result?

  1. t = -2.0; significant, since |t| exceeds 1.96
  2. t = −0.67; not significant at the 5% level
  3. t = −6.0; significant, the fat is below label
  4. t = -2.0; not significant, since |t| < 2.306
Answer and working

D. t = -2.0; not significant, since |t| < 2.306

t = (2.9 − 3.0)/(0.15/√9) = −0.1/0.05 = -2.0. With 8 df the critical value is 2.306, so the difference is not significant. Using 1.96 applies the large-sample z value to n = 9; −0.67 divides by s instead of s/√n; −6.0 divides by s/n.

Question 8 · medium

Panel scores and an instrument reading rise together but along a curve, and two samples are extreme. Which correlation measure suits this relationship best?

  1. Pearson's product-moment correlation
  2. The coefficient of variation
  3. Spearman's rank correlation
  4. The covariance in original units
Answer and working

C. Spearman's rank correlation

Spearman's coefficient works on ranks, measures any monotonic relationship and is robust to outliers. Pearson's r measures only linear association and is sensitive to extreme points; the CV and covariance are not correlation measures on a −1 to +1 scale.

Question 9 · hard

A calibration line gives r = 0.995, but the residuals form a clear U-shaped pattern against concentration. What should the analyst conclude?

  1. The response is curved; high r does not prove linearity, so refit or narrow the range
  2. The line is adequate, because any r above 0.99 confirms that the response is linear across the range
  3. The residual pattern reflects random noise only, so more replicates at each level will remove it
  4. The intercept must be forced through zero, which will straighten the residuals and fix the fit
Answer and working

A. The response is curved; high r does not prove linearity, so refit or narrow the range

A systematic residual pattern shows lack of fit; r can be very high for curved data. The remedy is a curved (for example quadratic) model or a narrower linear range. Replicates do not remove systematic curvature, and forcing zero intercept usually worsens it.

Question 10 · hard

Five samples have sugar levels x = 1, 2, 3, 4, 5 and sweetness scores y = 3, 5, 4, 7, 6. What is Pearson's r?

  1. 0.64
  2. 0.80
  3. 0.89
  4. 1.00
Answer and working

B. 0.80

Mean x = 3, mean y = 5. Sxy = 8, Sxx = 10, Syy = 10. r = 8/√(10 × 10) = 0.80. 0.64 is r², the coefficient of determination; 0.89 is the square root of r, a slip; 1.00 would need all points on a straight line.

A study plan for Statistics, Experimental Design & Chemometrics for Food Science in GATE XE

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (35% of the 34 questions): Descriptive statistics and probability distributions: binomial, Poisson and normal (12, 35%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Sampling distributions, confidence intervals and hypothesis tests: z, t, chi-square and F (12, 35%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Correlation and linear and multiple regression (10, 29%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Correlation and linear and multiple regression (2 hard of 10), Sampling distributions, confidence intervals and hypothesis tests: z, t, chi-square and F (2 hard of 12), Descriptive statistics and probability distributions: binomial, Poisson and normal (1 hard of 12).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Descriptive statistics and probability distributions: binomial, Poisson and normal (5 easy of 12); Sampling distributions, confidence intervals and hypothesis tests: z, t, chi-square and F (4 easy of 12).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE XE Statistics, Experimental Design & Chemometrics for Food Science

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.