GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papersGATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.
Source: gate2026.iitg.ac.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
The calculus, linear algebra, differential equations and numerical methods behind every food engineering calculation: heat penetration curves, drying rates, reaction kinetics and process optimisation. GATE XE makes this section compulsory for every candidate who takes the Food Technology section.
Our 80 GATE XE questions in this subject: 28 easy, 43 medium, 9 hard, across 13 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to GATE XE and are not shown on any other exam's page.
What is the limit of (1 − cos x)/x² as x approaches 0?
C. 1/2
Using cos x ≈ 1 − x²/2, the numerator ≈ x²/2, so the ratio → 1/2. L'Hôpital twice gives sin x/(2x) then cos x/2 → 1/2. 1 drops the factorial 2!; 0 stops after one application, before the form is resolved; 2 inverts the answer.
What is the coefficient of x³ in the Maclaurin series of eˣ?
A. 1/6
eˣ = 1 + x + x²/2! + x³/3! + …, so the x³ coefficient is 1/3! = 1/6. 1/3 omits the factorial; 1 treats every coefficient as 1; 1/24 is the x⁴ coefficient.
For f(x, y) = x²y + 3y², what is ∂f/∂y?
D. x² + 6y
Holding x constant: ∂(x²y)/∂y = x² and ∂(3y²)/∂y = 6y, giving x² + 6y. 2xy is ∂f/∂x; 2xy + 6y mixes the two partials; x² + 3y forgets to differentiate 3y² properly.
What is the value of the integral of e^(−2x) from 0 to infinity?
B. 0.5
∫₀^∞ e^(−ax) dx = 1/a, so with a = 2 the value is 0.5. 2 is a rather than 1/a; 1 is the case a = 1; the integral converges because the exponent is negative.
What is the sum of the series 1 + 1/2 + 1/4 + 1/8 + …?
B. 2
A geometric series with a = 1 and r = 1/2 sums to a/(1 − r) = 1/(1/2) = 2. 1 stops at the first term; 1.5 at the second; a geometric series with |r| < 1 converges.
What is the radius of convergence of the power series Σ xⁿ/3ⁿ?
D. 3
aₙ = 3^(−n), and R = lim|aₙ/aₙ₊₁| = 3. Equivalently it is a geometric series in x/3, converging for |x/3| < 1, i.e. |x| < 3. 1/3 inverts the ratio; 1 is the radius for Σxⁿ; ∞ is for eˣ.
What is the integrating factor for dy/dx + 2y/x = x?
B. x²
For dy/dx + P(x)y = Q(x), the integrating factor is e^(∫P dx) = e^(2 ln x) = x². e^(2x) treats P as the constant 2; 2 ln x is the exponent, not the factor; 1/x² has the sign of the exponent reversed.
Which is the condition for M(x, y)dx + N(x, y)dy = 0 to be an exact equation?
C. ∂M/∂y = ∂N/∂x
The equation is exact if there is a function ψ with ψ_x = M and ψ_y = N, which requires ψ_xy = ψ_yx, i.e. ∂M/∂y = ∂N/∂x. The other conditions are not the exactness test; the reversed-sign version resembles a Cauchy-Riemann equation.
For the same data (y = 1, 4, 9, 16, 25 at x = 1 to 5, h = 1), what does Simpson's one-third rule give for the integral?
B. 41.33
Simpson: (h/3)[y₀ + 4(y₁ + y₃) + 2y₂ + y₄] = (1/3)[1 + 80 + 18 + 25] = 124/3 = 41.33, exact because Simpson's rule integrates polynomials up to degree three exactly. 42.00 is the trapezoidal result; 55.00 is the sum of ordinates; 41.00 rounds the weights wrongly.
How does the global error of Euler's method change when the step size is halved?
D. It roughly halves
Euler's method is first order: global error ∝ h, so halving h roughly halves it. Quartering corresponds to a second-order method such as Heun's; a factor of sixteen to fourth-order Runge-Kutta.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.