GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papers
10worked here, free
120written to this exam in this subject
14syllabus units
About GATE XE
GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.
The minor constituents that decide colour, flavour and nutritional value, the enzymes that act in raw and processed food, and the browning reactions — enzymatic and non-enzymatic — that every food technologist must control or exploit.
Our 120 GATE XE questions in this subject: 36 easy, 77 medium, 7 hard, across 14 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to GATE XE and are not shown on any other exam's page.
Question 1 · easy
Which receptor pair detects sweet taste?
TRPV1 and TRPM8
T2R receptors
T1R1 and T1R3
T1R2 and T1R3
Answer and working
D. T1R2 and T1R3
T1R2/T1R3 is the sweet receptor; T1R1/T1R3 is umami; T2Rs detect bitter; TRPV1 and TRPM8 detect heat and cooling.
Question 2 · medium
Black tea 'fermentation' is mainly:
Acetic fermentation of the leaf juice
Enzymatic oxidation of catechins by polyphenol oxidase
Alcoholic fermentation by yeasts on the rolled leaves
Lactic fermentation of the leaf sugars by bacteria
Answer and working
B. Enzymatic oxidation of catechins by polyphenol oxidase
PPO oxidises catechins to theaflavins and thearubigins, giving colour, briskness and flavour.
Question 3 · medium
An enzyme has Vmax = 100 units and Km = 2 mM. What is the rate at 6 mM substrate?
300 units
33 units
75 units
50 units
Answer and working
C. 75 units
v = 100 × 6/(2 + 6) = 75. 50 units is the rate at [S] = Km.
Question 4 · medium
In a Lineweaver-Burk plot, what is the y-intercept?
Why is a little soy flour added to wheat flour in some breads?
Its lipoxygenase bleaches carotenoids, whitening the crumb
Its pectinases soften the crust
Its polyphenol oxidase darkens the crumb
Its trypsin inhibitors slow staling
Answer and working
A. Its lipoxygenase bleaches carotenoids, whitening the crumb
Coupled oxidation by lipoxygenase bleaches flour carotenoids and also aids dough mixing tolerance.
Question 6 · medium
What is the main advantage of immobilised enzymes?
Higher activity than any free enzyme in every case
No effect of temperature on activity
No need for any pH control in the reactor
The enzyme is reused and the process runs continuously
Answer and working
D. The enzyme is reused and the process runs continuously
Enzymes bound to supports in columns can be used repeatedly; activity may be lower than free enzyme.
Question 7 · medium
How does pH affect the rate of the Maillard reaction?
It is not affected by pH at all
It is fastest at pH 1 and stops above pH 5
It is faster at higher pH, where amino groups are unprotonated
It occurs only at exactly neutral pH
Answer and working
C. It is faster at higher pH, where amino groups are unprotonated
The unprotonated amino group is the reactive form, so alkaline conditions speed browning, as in pretzels dipped in lye.
Question 8 · medium
Caramelisation differs from the Maillard reaction because it:
Requires polyphenol oxidase and oxygen to proceed
Produces mainly sulphur compounds
Occurs only at refrigeration temperatures
Involves sugars heated without amino compounds
Answer and working
D. Involves sugars heated without amino compounds
Caramelisation is thermal degradation of sugars, catalysed by acid or base, at higher temperatures.
Question 9 · medium
How does IARC classify acrylamide?
Group 1, carcinogenic to humans with sufficient evidence
Group 2A, probably carcinogenic
Not evaluated by IARC
Group 3, not classifiable at all
Answer and working
B. Group 2A, probably carcinogenic
IARC placed acrylamide in Group 2A in 1994.
Question 10 · easy
Which flavonoid subclass includes hesperidin and naringin of citrus?
Flavan-3-ols
Isoflavones
Flavanones
Anthocyanidins
Answer and working
C. Flavanones
Isoflavones are soy compounds; flavan-3-ols are catechins.
A study plan for Food Chemistry II: Pigments, Flavours, Vitamins, Minerals, Enzymes & Browning in GATE XE
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (42% of the 120 questions): Food enzymes: specificity, kinetics, inhibition and coenzymes (11, 9%); Flavour chemistry: terpenes, esters, aldehydes, ketones and sulphur compounds (10, 8%); Pigments: chlorophylls, carotenoids, anthocyanins, betalains, tannins and myoglobin (10, 8%); Vitamins: stability during processing and storage (10, 8%); Colour changes during processing and storage (9, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Minerals in foods and their chemistry (9, 8%); Taste: sweet, sour, salty, bitter and umami compounds (9, 8%); Flavour generation during processing, fermentation and maturation (8, 7%); Industrial enzymes in food processing (8, 7%); Maillard reaction and caramelisation (8, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Phenolic compounds and natural antioxidants (8, 7%); Acrylamide and other process contaminants from browning (7, 6%); Enzymatic browning and its control (7, 6%); Endogenous enzymes in raw materials: lipoxygenase, polyphenol oxidase, peroxidase and pectinases (6, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Vitamins: stability during processing and storage (3 hard of 10), Colour changes during processing and storage (1 hard of 9), Minerals in foods and their chemistry (1 hard of 9).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Taste: sweet, sour, salty, bitter and umami compounds (4 easy of 9); Flavour chemistry: terpenes, esters, aldehydes, ketones and sulphur compounds (4 easy of 10).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.