ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
23written to this exam in this subject
13syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
The minor constituents that decide colour, flavour and nutritional value, the enzymes that act in raw and processed food, and the browning reactions — enzymatic and non-enzymatic — that every food technologist must control or exploit.
Our 23 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 7 medium, 15 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
What causes the 'skunky' light-struck flavour of beer in clear bottles?
Dimethyl sulphide released by the malt during light exposure in the brewhouse
3-Methyl-2-butene-1-thiol from photodegraded hop iso-α-acids
Diacetyl produced by bacteria growing in bottles exposed to the sun
Hydrogen sulphide formed by yeast autolysis under bright light
Answer and working
B. 3-Methyl-2-butene-1-thiol from photodegraded hop iso-α-acids
Riboflavin photosensitises cleavage of iso-α-acids; the side chain combines with a sulphur source to give the thiol. Brown glass blocks the active wavelengths.
Question 2 · medium
What does gas chromatography-olfactometry add to GC-MS analysis of aroma?
A trained assessor sniffs the effluent to find which peaks actually smell
It converts non-volatile tastants into volatile derivatives
It measures the molecular mass of each volatile compound exactly
It removes the need for any column, separating compounds by smell alone
Answer and working
A. A trained assessor sniffs the effluent to find which peaks actually smell
Many volatiles are odourless at their concentration; sniffing the effluent pinpoints the odour-active ones.
Question 3 · medium
In Strecker degradation, an amino acid reacts with an α-dicarbonyl to give:
An aldehyde with one carbon fewer than the amino acid
An ester formed between the amino acid and ethanol
A glycosylamine identical to the Amadori product
A ketone with two more carbons than the original amino acid
Answer and working
A. An aldehyde with one carbon fewer than the amino acid
The amino acid is deaminated and decarboxylated to a Strecker aldehyde; the dicarbonyl becomes an aminoketone that forms pyrazines.
Question 4 · medium
What gives blue cheese its characteristic sharp aroma?
Pyrazines formed by roasting the cheese surface
Methyl ketones made by Penicillium roqueforti from fatty acids
Esters made by yeasts from lactose in the curd
Terpenes absorbed from the mould's growth medium
Answer and working
B. Methyl ketones made by Penicillium roqueforti from fatty acids
The mould's lipases release fatty acids and partial β-oxidation gives methyl ketones such as 2-heptanone.
Question 5 · hard
Vitamin C in a juice degrades by first-order kinetics with k = 0.02 per day. What is its half-life?
About 50 days
About 14 days
About 0.35 days
About 35 days
Answer and working
D. About 35 days
t½ = ln 2/k = 0.693/0.02 ≈ 34.7 days. 50 days uses 1/k; 14 days uses 0.693 × 20 = 13.9 by misapplying k.
Question 6 · hard
Why can peroxidase activity reappear in blanched vegetables during storage?
Partly denatured peroxidase refolds and regains activity
Peroxidase is produced afresh by surviving cells in frozen storage
Frozen storage converts catalase into peroxidase
Bacteria release peroxidase identical to the plant enzyme
Answer and working
A. Partly denatured peroxidase refolds and regains activity
Some peroxidase isoenzymes refold after heating, so blanching must be adequate to prevent regeneration.
Question 7 · hard
Which lipases allow structured lipids to be made by interesterification?
Lipoxygenases that oxidise the fatty acids
Lipases that act only at the sn-2 position of phospholipids
Non-specific lipases that randomise all three positions
sn-1,3-specific lipases
Answer and working
D. sn-1,3-specific lipases
1,3-specific lipases exchange fatty acids at the outer positions, keeping the sn-2 acid, as in human-milk-fat substitutes.
Question 8 · medium
During which refining step do 3-MCPD esters and glycidyl esters mainly form?
Bleaching with clay at room temperature
High-temperature deodorisation
Cold pressing of the seeds before any heating
Winterisation of the oil at low temperature
Answer and working
B. High-temperature deodorisation
They form from acylglycerols and chlorine sources at the high temperatures of deodorisation, especially in palm oil.
Question 9 · hard
Why do in vitro antioxidant assays such as DPPH not predict performance in a food?
They measure only vitamin C and ignore phenolics
They require the antioxidant to be a protein
They overestimate all antioxidants by exactly a factor of ten
They test radical chemistry in solution, not the food matrix
Answer and working
D. They test radical chemistry in solution, not the food matrix
Partitioning, interfaces, metals and oxygen in real foods decide efficacy; storage tests or Rancimat induction periods are used.
Question 10 · hard
Under what conditions can phenolic compounds and ascorbic acid act as pro-oxidants?
Only when the pH is above 12
At high concentration with free iron or copper
Only when the food contains no fat
Only at refrigeration temperatures in the dark
Answer and working
B. At high concentration with free iron or copper
They reduce Fe³⁺ to Fe²⁺, which then generates radicals from peroxides (Fenton chemistry).
A study plan for Food Chemistry II: Pigments, Flavours, Vitamins, Minerals, Enzymes & Browning in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (57% of the 23 questions): Acrylamide and other process contaminants from browning (3, 13%); Colour changes during processing and storage (3, 13%); Flavour generation during processing, fermentation and maturation (3, 13%); Flavour chemistry: terpenes, esters, aldehydes, ketones and sulphur compounds (2, 9%); Food enzymes: specificity, kinetics, inhibition and coenzymes (2, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Industrial enzymes in food processing (2, 9%); Phenolic compounds and natural antioxidants (2, 9%); Endogenous enzymes in raw materials: lipoxygenase, polyphenol oxidase, peroxidase and pectinases (1, 4%); Enzymatic browning and its control (1, 4%); Maillard reaction and caramelisation (1, 4%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Minerals in foods and their chemistry (1, 4%); Taste: sweet, sour, salty, bitter and umami compounds (1, 4%); Vitamins: stability during processing and storage (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Phenolic compounds and natural antioxidants (2 hard of 2), Endogenous enzymes in raw materials: lipoxygenase, polyphenol oxidase, peroxidase and pectinases (1 hard of 1), Enzymatic browning and its control (1 hard of 1).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Colour changes during processing and storage (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.