LAISHA
Open Laisha

ICAR AICE-JRF/SRF Food Structure, Colloids, Encapsulation & Nanotechnology: practice questions

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
83written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Structure, Colloids, Encapsulation & Nanotechnology in ICAR AICE-JRF/SRF

How the arrangement of molecules and phases decides texture, stability and digestion: emulsions, foams, gels and their stability, structure-function design, encapsulation and delivery of bioactives, digestion models, and the science and regulation of nanoscale food materials.

Our 83 ICAR AICE-JRF/SRF questions in this subject: 11 easy, 60 medium, 12 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

Which average droplet diameter is most sensitive to a few large droplets formed by coalescence?

  1. Number mean diameter
  2. Modal number diameter
  3. d₄₃ (volume-weighted mean)
  4. d₃₂ (surface-weighted mean)
Answer and working

C. d₄₃ (volume-weighted mean)

d₄₃ = Σnd⁴/Σnd³ weights large droplets heavily; d₃₂ relates to surface area.

Question 2 · easy

What is the approximate surface tension of pure water against air at room temperature?

  1. About 0.7 mN/m
  2. About 300 mN/m
  3. About 72 mN/m
  4. About 7 mN/m
Answer and working

C. About 72 mN/m

Water's hydrogen bonding gives a high value, about 72 mN/m.

Question 3 · medium

Why is two-stage homogenisation used for cream and milk products?

  1. The second stage whips air into the emulsion
  2. The second stage pasteurises the product completely
  3. The second stage removes the emulsifier from droplets
  4. It breaks up droplet clusters
Answer and working

D. It breaks up droplet clusters

A lower-pressure second stage disperses clusters formed after the first stage.

Question 4 · medium

Why is gum arabic an excellent emulsifier for beverage emulsions?

  1. It is a pure protein containing no carbohydrate at all
  2. It raises the interfacial tension of the oil sharply
  3. Protein anchors it; the carbohydrate gives steric repulsion
  4. It forms a firm gel with the calcium in the water
Answer and working

C. Protein anchors it; the carbohydrate gives steric repulsion

The protein-arabinogalactan complex adsorbs and provides a thick steric layer stable to acid and salt.

Question 5 · hard

Why is reformulation to reduce fat often called a structural problem?

  1. Fat is never present in structured foods at all
  2. Removing fat always improves the texture of foods
  3. Fat has no influence on flavour release in the mouth
  4. Fat's texture role comes from its structures
Answer and working

D. Fat's texture role comes from its structures

Replacing composition without rebuilding structure rarely reproduces texture, mouthfeel and flavour release.

Question 6 · medium

What is a key advantage of complex coacervation over spray drying for fish oil?

  1. Much higher payloads
  2. No wall materials are needed at all
  3. Lower cost than any other encapsulation method
  4. It works without any water in the process
Answer and working

A. Much higher payloads

Coacervates can hold well above 50% oil.

Question 7 · medium

Which wall material forms inclusion complexes holding small flavour molecules in a cavity?

  1. Gum arabic
  2. β-Cyclodextrin
  3. Sodium caseinate
  4. Maltodextrin of low DE
Answer and working

B. β-Cyclodextrin

Cyclodextrins have hydrophobic cavities that host small non-polar molecules.

Question 8 · medium

What is spray chilling?

  1. Drying a solution of the wall material in hot air
  2. Freezing a gel of the active in liquid nitrogen
  3. Atomising molten fat with the active into cold air
  4. Coating particles with a polymer in a hot fluid bed
Answer and working

C. Atomising molten fat with the active into cold air

Droplets solidify as lipid matrices that release on melting.

Question 9 · medium

How are chitosan nanoparticles formed by ionic gelation?

  1. Chitosan is cross-linked by tripolyphosphate
  2. Chitosan is precipitated by adding ethanol
  3. Chitosan is melted and extruded into strands
  4. Chitosan is hydrolysed completely to glucosamine
Answer and working

A. Chitosan is cross-linked by tripolyphosphate

Electrostatic cross-linking between protonated amines and TPP forms particles.

Question 10 · hard

Why should in-vitro digestion results on a functional ingredient be followed by human studies before health claims?

  1. They omit absorption, regulation and microbiota
  2. Human studies are cheaper than in-vitro tests
  3. Regulators accept only animal studies for claims
  4. In-vitro models always overestimate digestion tenfold
Answer and working

A. They omit absorption, regulation and microbiota

Models compare products and mechanisms but cannot capture whole-body physiology.

A study plan for Food Structure, Colloids, Encapsulation & Nanotechnology in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (41% of the 83 questions): Nanoemulsions, liposomes and nanoparticles (9, 11%); Safety assessment and regulation of nanomaterials in food (9, 11%); Emulsion formation and stability mechanisms (8, 10%); In-vitro digestion models and bioaccessibility (8, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Nanotechnology in packaging and sensing (8, 10%); Protein-polysaccharide interactions (8, 10%); Interfacial science: surfactants and proteins at interfaces (7, 8%); Colloidal systems in foods: dispersions, emulsions, foams and gels (6, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Microencapsulation: spray drying, coacervation and extrusion (6, 7%); Structure-function relationships and food structure design (6, 7%); Foams and aerated foods (4, 5%); Protein and polysaccharide gels (4, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Foams and aerated foods (1 hard of 4), Protein and polysaccharide gels (1 hard of 4), Colloidal systems in foods: dispersions, emulsions, foams and gels (1 hard of 6).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Nanotechnology in packaging and sensing (2 easy of 8); Nanoemulsions, liposomes and nanoparticles (2 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Food Structure, Colloids, Encapsulation & Nanotechnology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.