ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papersICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
35.a Unit 5 covers unit operations of grading, sorting, peeling and size reduction; 37 Unit 4 covers membrane processing; 41 covers post-harvest unit operations, process machinery design and material handling. Expect deeper questions on membrane fouling and diafiltration, compressible cakes, centrifuge sigma theory and supercritical extraction.
The mechanical operations that clean, sort, reduce, mix, homogenise and separate food materials, including filtration, centrifugation and membrane processes, with the design equations used to size them.
Our 65 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 43 medium, 22 hard, across 15 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Compared with abrasion peeling, flash steam peeling generally gives
D. lower losses and less effluent
Abrasion peeling rubs off flesh with the skin and needs much water; steam peeling is efficient with little effluent.
A sample contains 3 particles of 10 µm, 2 of 20 µm and 1 of 30 µm. Its Sauter mean diameter d32 is closest to
A. 23.0 µm
d32 = (3×1,000 + 2×8,000 + 27,000)/(3×100 + 2×400 + 900) = 46,000/2,000 = 23.0 µm. 16.7 is the number mean; 20.0 is d21; 25.2 is d43.
Laser diffraction particle sizing differs from sieve analysis in that it
D. gives volume-based distributions with fine resolution below 50 µm
Laser diffraction converts light-scattering patterns to volume distributions; methods measure different properties and give different results.
For a powder blend, the variance of the fully segregated mixture is 0.04, of a perfectly random mixture 0.0025, and the measured sample variance 0.01. The Lacey mixing index is closest to
B. 0.80
M = (σ0² − s²)/(σ0² − σR²) = 0.03/0.0375 = 0.80. 0.25 is a variance ratio; 0.75 omits σR²; 1.25 inverts the ratio.
In reverse osmosis, transmembrane pressure is 4.0 MPa, osmotic pressure difference 2.0 MPa, permeate viscosity 0.001 Pa s and total resistance 2 × 10¹³ m⁻¹. Using J = (ΔP − Δπ)/(μRt), the flux is closest to
C. 360 L/m² h
J = 2.0 × 10⁶/(10⁻³ × 2 × 10¹³) = 1.0 × 10⁻⁴ m/s = 360 L/m² h. 720 ignores osmotic pressure; 0.10 is per second; 1080 adds osmotic pressure.
Diafiltration in whey protein production means
A. adding water to the retentate and filtering again to wash out lactose and salts
Diluting and re-filtering removes permeable components, raising protein purity, as in whey protein isolates.
Flux in a dairy UF plant falls steadily during each run and recovers after cleaning. The most likely cause is
C. fouling by proteins and calcium phosphate
Reversible fouling and polarisation lower flux during runs; CIP with alkali, acid and enzymes restores it.
100 kg of water saturated with lactose at 60 °C (solubility 59 g per 100 g water) is cooled to 20 °C (solubility 19 g per 100 g water). Ignoring water of crystallisation, the lactose that can crystallise is about
D. 40 kg
59 − 19 = 40 kg. 19 kg remains dissolved; 59 kg is the total; 78 adds the two.
Palm oil is separated into olein and stearin industrially by
D. dry fractionation: controlled cooling and filtration
Controlled crystallisation forms solid stearin, which is filtered from liquid olein.
Small amounts of ethanol are added as a co-solvent to supercritical CO₂ mainly to
C. extend extraction to more polar compounds
CO₂ is non-polar; ethanol increases its ability to dissolve polar compounds.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.