ICAR AICE-JRF/SRF Food Process Modelling, Simulation & Optimisation: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
90written to this exam in this subject
11syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Process Modelling, Simulation & Optimisation in ICAR AICE-JRF/SRF
Building and using models of food processes: kinetic models of quality and microbial change, numerical solution of heat and mass transfer, computational fluid dynamics, multi-objective optimisation, data-driven and machine-learning models, and digital twins of food plants.
Our 90 ICAR AICE-JRF/SRF questions in this subject: 15 easy, 64 medium, 11 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
What is the advantage of one-step (global) fitting over two-step fitting of kinetic models?
It needs no experimental data at all to work
It fits only the primary model to each experiment
All data are fitted at once, giving realistic intervals
It always gives the same result as two-step fitting
Answer and working
C. All data are fitted at once, giving realistic intervals
Global fitting estimates all parameters simultaneously from the raw data.
Question 2 · medium
Why is a zero-gradient (Neumann) condition used at the centre of a symmetric slab?
The centre is always at the medium temperature
The centre has an infinite thermal conductivity
No net heat crosses the central symmetry plane
It makes the numerical solution unstable
Answer and working
C. No net heat crosses the central symmetry plane
By symmetry the temperature profile has a maximum or minimum at the centre, so ∂T/∂x = 0.
Question 3 · medium
Why should shrinkage be included in models of fruit drying?
It raises the wet-bulb temperature of the drying air
It shortens the diffusion path
It has no effect at all on moisture transport
It adds water back into the drying product
Answer and working
B. It shortens the diffusion path
Volume loss changes dimensions and properties during drying.
Question 4 · medium
Which model represents a stacked pallet of fruit in a cold-store CFD simulation without meshing every fruit?
A porous-media model
A discrete droplet model
A laminar pipe-flow model
A volume-of-fluid model
Answer and working
A. A porous-media model
Porous media represent resistance to airflow and heat exchange in the stack.
Question 5 · easy
What does a steady-state flowsheet simulator mainly calculate?
The DNA sequence of the raw materials used
Sensory scores of the products made
Only the cost of the labour on each shift
Mass and energy balances
Answer and working
D. Mass and energy balances
Flowsheet simulators solve balances, sizing and utilities.
Question 6 · medium
What is data leakage in ML?
Sharing data with colleagues
Using too few features
Data lost by a computer failure
Test or future information entering training
Answer and working
D. Test or future information entering training
Leakage inflates apparent performance.
Question 7 · medium
What does a Sobol total-effect index measure?
Its share of output variance with interactions
The mean value of the input over its range
The cost of measuring the input in the laboratory
The number of Monte Carlo runs that are needed
Answer and working
A. Its share of output variance with interactions
First-order indices exclude interactions; total-effect indices include them.
Question 8 · medium
In first-order uncertainty propagation for independent inputs, how is output variance approximated?
Product of all input means
Largest input variance only
Sum of input means
Sum of squared sensitivities times input variances
Answer and working
D. Sum of squared sensitivities times input variances
Var(y) ≈ Σ(∂y/∂x_i)² Var(x_i).
Question 9 · easy
What distinguishes a digital twin from a digital model?
A digital model is always the more accurate one
There is no difference between the two terms
A twin uses live data and informs decisions
A twin has no mathematical model inside it
Answer and working
C. A twin uses live data and informs decisions
A digital model is offline; a shadow receives data; a twin also feeds decisions back.
Question 10 · easy
Which is a challenge for Industry 4.0 in food plants?
Lack of any machines
No use for data at all
Too few products to make
Hygienic sensors, cybersecurity and data quality
Answer and working
D. Hygienic sensors, cybersecurity and data quality
Washdown conditions, security of connected control systems and data standards are key issues.
A study plan for Food Process Modelling, Simulation & Optimisation in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (40% of the 90 questions): Computational fluid dynamics in food processing (9, 10%); Digital twins and Industry 4.0 in food plants (9, 10%); Machine learning and artificial intelligence in food processing (9, 10%); Numerical methods: finite difference and finite element (9, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Optimisation methods: single- and multi-objective (9, 10%); Types of models: empirical, mechanistic and data-driven (9, 10%); Process simulation software (8, 9%); Uncertainty and sensitivity analysis (8, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Modelling heat transfer in thermal processing (7, 8%); Modelling simultaneous heat and mass transfer in drying and frying (7, 8%); Kinetic modelling of quality, nutrient and microbial changes (6, 7%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Kinetic modelling of quality, nutrient and microbial changes (1 hard of 6), Modelling heat transfer in thermal processing (1 hard of 7), Modelling simultaneous heat and mass transfer in drying and frying (1 hard of 7).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Process simulation software (2 easy of 8); Computational fluid dynamics in food processing (2 easy of 9).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.