ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papersICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Controlling quality in the plant and in the laboratory: quality systems and TQM, control charts and process capability, acceptance sampling and two- and three-class sampling plans, laboratory quality management and ISO/IEC 17025 accreditation, method validation and proficiency testing.
Our 80 ICAR AICE-JRF/SRF questions in this subject: 18 easy, 48 medium, 14 hard, across 14 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
In ISO 9001:2015, what replaced the separate requirement for preventive action?
A. Risk-based thinking
The 2015 edition embeds risk-based thinking (clause 6.1, actions to address risks and opportunities) and removed the preventive-action clause. The quality manual became optional; testing and SPC are not mandated.
Which is one of the seven quality management principles in ISO 9000:2015?
A. Evidence-based decision making
The principles are customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management. Mass inspection and lowest-price purchasing are practices Deming warned against.
Which pattern is a signal of a special cause under the Western Electric rules?
B. Eight consecutive points on one side of the centre line
A long run on one side suggests a shift in the process mean. Random scatter is expected; a point near the centre line is normal; brief alternation within limits is not a standard rule signal.
A laboratory plots one fat result per day on an individuals chart: mean 4.0%, mean moving range 0.15%. What are the control limits? (E₂ = 2.66)
B. 3.60% to 4.40%
Limits = X̄ ± 2.66 MR̄ = 4.0 ± 2.66 × 0.15 = 4.0 ± 0.40, i.e. 3.60% to 4.40%. 3.55 to 4.45 uses 3 × MR̄; 3.85 to 4.15 uses ±MR̄; 3.70 to 4.30 uses ±2MR̄.
A filler must keep the mean at least 3σ above a 500 g minimum. If σ falls from 2.0 g to 1.0 g, by how much can the target be lowered?
B. 3 g
Target = 500 + 3σ: 506 g at σ = 2.0, 503 g at σ = 1.0, a saving of 3 g per pack. 1 g is the change in σ; 6 g is the old safety margin; 2 g is the old σ.
A plan inspects 20 units and accepts the lot only if none is defective. What is the probability of accepting a lot that is 5% defective?
C. 0.36
Pa = (1 − p)ⁿ = 0.95²⁰ = 0.36. 0.05 is the defective fraction; 0.95 is the chance that one unit is good; 0.64 is the probability of rejection.
Why do wet, salty products reduce the sensitivity of a metal detector?
D. Their conductivity masks small metal
Conductive products give a signal of their own (product effect); the detector is adjusted to ignore it, which also reduces sensitivity to small metal, especially stainless steel. X-ray absorption is irrelevant to metal detection.
What new requirement did ISO/IEC 17025:2017 add for statements of conformity?
B. A documented decision rule that accounts for uncertainty
When reporting conformity with a specification, the laboratory must define and agree the decision rule, including how measurement uncertainty is taken into account. The other options are not requirements.
A laboratory reports 10.8 ± 0.6 (U, k = 2) against a reference value of 10.0 ± 0.3 (U). What is the En number, and is it satisfactory?
D. 1.19; not satisfactory, since |En| > 1
En = (10.8 − 10.0)/√(0.6² + 0.3²) = 0.8/0.671 = 1.19, which exceeds 1. 0.89 adds the U values linearly; 1.33 divides by 0.6 alone and misjudges the rating; 0.80 omits the denominator.
What distinguishes a certified reference material from an ordinary reference material?
D. A certificate with value, uncertainty and traceability
A CRM is characterised by a metrologically valid procedure and carries a certificate stating the property value, its uncertainty and traceability. Price and matrix are not defining, and in-house materials are not certified.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.