ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
56written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Risk Analysis: Risk Assessment, Management & Communication in ICAR AICE-JRF/SRF
35.b Unit 2 (concept of risk analysis): components and order of risk assessment, definitions, risk assessment policy, dose-response models, exposure and margin-of-exposure calculations, FSO/PO/PC and the ICMSF equation, risk communication and the roles of JECFA, JMPR and JEMRA.
The Codex risk-analysis framework that underlies modern food standards: hazard identification and characterisation, exposure assessment, quantitative microbial and chemical risk assessment, food safety objectives and performance objectives, and risk communication.
Our 56 ICAR AICE-JRF/SRF questions in this subject: 5 easy, 29 medium, 22 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Why does Codex call for functional separation between risk assessment and risk management?
Because assessment must be done only by industry
So that management decisions can ignore the assessment
To prevent assessors and managers from ever communicating
To protect scientific integrity and clarify roles
Answer and working
D. To protect scientific integrity and clarify roles
Separation protects science; interaction is still essential, since managers frame the questions.
Question 2 · hard
Using the exponential dose-response model P = 1 − exp(−r d), with r = 0.001 and a dose of 100 organisms, what is the probability of illness?
0.095
0.905
0.001
0.100
Answer and working
A. 0.095
P = 1 − exp(−0.1) = 1 − 0.905 = 0.095. 0.100 is the low-dose approximation r × d; 0.905 is exp(−0.1).
Question 3 · hard
Why do food balance sheets tend to overestimate dietary exposure?
They exclude staple foods from the calculation
They record only foods eaten by children
They use consumers-only data for every food
They measure food available, not eaten
Answer and working
D. They measure food available, not eaten
Balance sheets estimate national availability per person; individual surveys are preferred.
Question 4 · hard
Aggregate exposure differs from cumulative exposure in that aggregate exposure combines:
Only dietary routes; cumulative includes occupational routes only
Exposure of adults; cumulative refers only to children
Several substances for one route; cumulative combines several routes for one substance
Many routes for one substance versus many substances with one mode of action
Answer and working
D. Many routes for one substance versus many substances with one mode of action
Aggregate: one substance, many routes (diet, water, air). Cumulative: many substances acting the same way.
Question 5 · medium
Which JEMRA assessment found that most listeriosis risk comes from foods that support growth and are eaten after long storage?
Salmonella in eggs and broiler chickens
Listeria monocytogenes in ready-to-eat foods
Vibrio species in seafood
Campylobacter in broiler chickens
Answer and working
B. Listeria monocytogenes in ready-to-eat foods
The Listeria assessment supported criteria focused on growth during shelf life.
Question 6 · medium
Monte Carlo simulation in QMRA is used to:
Assign legal responsibility for an outbreak
Replace dose-response models entirely
Count colonies on agar plates automatically
Propagate input distributions to outputs
Answer and working
D. Propagate input distributions to outputs
Random sampling from input distributions gives output distributions.
Question 7 · hard
A genotoxic carcinogen has a BMDL10 of 0.4 mg/kg bw/day and exposure is 0.002 mg/kg bw/day. What is the margin of exposure?
0.005
20
200
2,000
Answer and working
C. 200
MOE = 0.4 / 0.002 = 200, indicating a health concern. 0.005 inverts the ratio.
Question 8 · easy
The appropriate level of protection (ALOP) is often expressed as:
Log reductions per minute of heating
Cases of illness per 100,000 people per year
Milligrams per kilogram of body weight
Colony-forming units per gram of food
Answer and working
B. Cases of illness per 100,000 people per year
The ALOP is a public health goal; FSOs translate it into food-level targets.
Question 9 · medium
According to the WHO FERG estimates published in 2015, roughly how many food-borne illnesses occurred worldwide in 2010?
6 billion
6 million
600 million
60 million
Answer and working
C. 600 million
FERG estimated about 600 million illnesses, 420,000 deaths and 33 million DALYs.
Question 10 · medium
Which closes the risk management loop by showing whether measures are working?
Monitoring and review, including surveillance of illness and hazards
Publishing the risk profile on the agency's website
Choosing the dose-response model
Setting risk assessment policy
Answer and working
A. Monitoring and review, including surveillance of illness and hazards
Monitoring and review gather evidence on effectiveness and new information.
A study plan for Food Risk Analysis: Risk Assessment, Management & Communication in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (41% of the 56 questions): Dose-response models (7, 13%); Food safety surveillance and the role of FAO/WHO expert bodies (JECFA, JMPR, JEMRA) (6, 11%); Chemical risk assessment and margin of exposure (5, 9%); Exposure assessment and dietary intake estimation (5, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Food safety objectives, performance objectives and performance criteria (5, 9%); Quantitative microbial risk assessment (5, 9%); Risk ranking and risk profiles (5, 9%); Risk characterisation (4, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Risk communication (4, 7%); Risk management options (4, 7%); Hazard identification and hazard characterisation (3, 5%); The Codex risk-analysis framework (3, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Exposure assessment and dietary intake estimation (3 hard of 5), Food safety objectives, performance objectives and performance criteria (3 hard of 5), Risk characterisation (2 hard of 4).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Food safety surveillance and the role of FAO/WHO expert bodies (JECFA, JMPR, JEMRA) (2 easy of 6); Risk communication (1 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.