ICAR AICE-JRF/SRF Food Packaging Science & Technology: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
79written to this exam in this subject
16syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Packaging Science & Technology in ICAR AICE-JRF/SRF
35.a Unit 5 names packaging materials and testing, metal cans and corrosion, shelf-life studies, aseptic, modified-atmosphere, vacuum, active and intelligent packaging, edible and biodegradable materials and FSSAI packaging and labelling requirements; 37 Unit 2 covers dairy packaging, retort pouches, migration of toxins and industrial packaging. Expect deeper questions on migration, MAP safety and recyclability.
Packaging as part of the preservation system: materials and their barrier properties, package design and testing, metal cans, glass, paper and plastics, aseptic, modified-atmosphere, active and intelligent packaging, migration and food-contact law, and packaging sustainability. Agricultural Engineering's storage-engineering-packaging covers bulk storage and an introduction to packaging materials; this subject is the full packaging course.
Our 79 ICAR AICE-JRF/SRF questions in this subject: 4 easy, 56 medium, 19 hard, across 16 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Among common flute profiles, the one giving the largest flute height and most cushioning is
E flute
A flute
B flute
F flute
Answer and working
B. A flute
A is the largest; E and finer flutes are used for printable retail cartons.
Question 2 · medium
The safety button on a vacuum-packed jar lid indicates
the product's best-before date
the filling temperature
whether the vacuum has been lost
the oxygen content of the food inside the pouch
Answer and working
C. whether the vacuum has been lost
The button is drawn down by vacuum; if it pops up the seal has failed.
Question 3 · medium
An aseptic beverage carton contains roughly
50 % glass, 30 % tin, 20 % paper
90 % aluminium, 10 % plastic
75 % paperboard, 20 % polyethylene, 5 % aluminium
100 % polyethylene
Answer and working
C. 75 % paperboard, 20 % polyethylene, 5 % aluminium
These commonly quoted proportions combine stiffness, liquid tightness and barrier.
Question 4 · medium
Pouch burst and creep tests evaluate
the colour of the pouch
the oxygen content of the food inside the pouch
overall seal strength by internal pressure
the thickness of the print
Answer and working
C. overall seal strength by internal pressure
Inflating until failure or holding at pressure tests all seals together.
Question 5 · medium
Nitrogen flushing of crisps and roasted nuts mainly
removes oxygen
adds moisture to keep them soft
inhibits Pseudomonas growth
colours them brown
Answer and working
A. removes oxygen
N2 displaces O2, slowing lipid oxidation, and cushions the product.
Question 6 · easy
A time–temperature indicator on a pack
shows cumulative temperature exposure by an irreversible colour change
measures the food's exact microbial count at the time of reading
releases preservative when warm
absorbs oxygen from the headspace
Answer and working
A. shows cumulative temperature exposure by an irreversible colour change
TTIs integrate time and temperature; details are in shelf-life-stability.
Question 7 · medium
RFID tags on cases differ from barcodes in that RFID
needs to be printed in ink on the food surface
cannot store any data
works only on glass
is read without line of sight
Answer and working
D. is read without line of sight
Radio-frequency tags are read remotely and can carry more data and sensor readings.
Question 8 · hard
PLA cups labelled 'compostable' are found in home compost heaps a year later, largely intact. The best explanation is that PLA
is not a plastic
degrades only in the dark
needs industrial composting temperatures to degrade
was coated with aluminium
Answer and working
C. needs industrial composting temperatures to degrade
PLA hydrolysis is slow at ambient temperatures; industrial composting is much hotter.
Question 9 · medium
NIAS in food-contact materials are
new ingredients added by the food maker
natural antioxidants in the food
national inspection agency standards
non-intentionally added substances
Answer and working
D. non-intentionally added substances
Risk assessment must cover substances not deliberately used.
Question 10 · medium
Extrusion lamination differs from adhesive lamination in that it
uses no polymers at all
bonds webs with a molten polymer layer
bonds webs with a curing polyurethane adhesive
welds metal sheets
Answer and working
B. bonds webs with a molten polymer layer
A molten polymer such as LDPE is extruded between webs as the bonding layer.
A study plan for Food Packaging Science & Technology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (47% of the 79 questions): Package testing methods (7, 9%); Barrier properties: water vapour and oxygen transmission rates (6, 8%); Migration and food-contact material regulation (6, 8%); Packaging waste, recycling and extended producer responsibility (6, 8%); Paper, paperboard and corrugated packaging (6, 8%); Plastics: polymer types, properties and processing (6, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Active packaging: oxygen scavengers, moisture absorbers and antimicrobials (5, 6%); Edible and biodegradable packaging (5, 6%); Intelligent packaging: indicators, sensors and RFID (5, 6%); Laminates, coextrusion and coatings (5, 6%); Metal cans: tinplate, tin-free steel and aluminium; corrosion and lacquers (5, 6%); Aseptic packaging systems (4, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Modified-atmosphere and vacuum packaging (4, 5%); Functions and levels of food packaging (3, 4%); Glass containers (3, 4%); Labelling and coding on packages (3, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Barrier properties: water vapour and oxygen transmission rates (3 hard of 6), Modified-atmosphere and vacuum packaging (2 hard of 4), Metal cans: tinplate, tin-free steel and aluminium; corrosion and lacquers (2 hard of 5).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Intelligent packaging: indicators, sensors and RFID (1 easy of 5); Packaging waste, recycling and extended producer responsibility (1 easy of 6).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.