LAISHA
Open Laisha

ICAR AICE-JRF/SRF Shelf-life Science & Food Stability: practice questions

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
72written to this exam in this subject
11syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Shelf-life Science & Food Stability in ICAR AICE-JRF/SRF

35.a Unit 5 names shelf-life studies; 37 Unit 3 covers water activity, sorption behaviour, control of aw in milk products and hurdle technology for shelf-stable and intermediate-moisture foods; 35.b covers microbiological criteria and sampling plans. Expect questions on reaction kinetics, Arrhenius and Q10 extrapolation, moisture-limited shelf life, ASLT limitations, challenge tests and date marking.

Predicting and proving how long a food stays safe and acceptable: the kinetics of quality loss, temperature and water-activity effects, accelerated shelf-life testing, packaging-limited shelf life, challenge tests and date labelling.

Our 72 ICAR AICE-JRF/SRF questions in this subject: 6 easy, 48 medium, 18 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · easy

Taking 1 cm³ of oxygen at standard conditions as 1.43 mg, 8 cm³ of oxygen weighs about

  1. 5.6 mg
  2. 11.4 mg
  3. 8.0 mg
  4. 0.18 mg
Answer and working

B. 11.4 mg

8 × 1.43 = 11.4 mg. 5.6 divides by 1.43; 8.0 ignores the factor.

Question 2 · easy

Accelerated shelf-life testing mainly uses

  1. higher storage temperatures
  2. lower storage temperatures
  3. sterilisation of samples
  4. shorter sensory panels
Answer and working

A. higher storage temperatures

Higher temperature (and sometimes humidity) speeds deterioration; results are extrapolated with Arrhenius or Q10.

Question 3 · medium

ASLT is generally unsuitable for

  1. shelf-stable dry snacks limited by oxidation
  2. canned foods limited by colour change
  3. safety-limited chilled foods
  4. milk powders limited by browning
Answer and working

C. safety-limited chilled foods

Microbial growth does not scale simply with temperature; chilled safety needs real-time and challenge studies.

Question 4 · medium

After ASLT predicts 12 months for a new cereal bar, good practice is to

  1. start real-time storage in parallel and confirm
  2. declare 18 months to be safe
  3. stop all further testing
  4. use the ASLT result as final without any further confirmation
Answer and working

A. start real-time storage in parallel and confirm

Real-time data confirm or revise the predicted shelf life.

Question 5 · medium

Challenge tests usually store inoculated packs

  1. only at −18 °C
  2. only at 37 °C for one day
  3. at realistic and abusive temperatures
  4. only at the lowest possible chill temperature
Answer and working

C. at realistic and abusive temperatures

Staged temperatures simulate the chain and consumer storage, including foreseeable abuse.

Question 6 · medium

Triangle tests against a fresh control give a

  1. measure of how many consumers would reject the product
  2. conservative 'detectable difference' end-point
  3. direct measurement of pathogen growth
  4. value of the product's water activity
Answer and working

B. conservative 'detectable difference' end-point

A detectable difference may still be acceptable, so this end-point is cautious.

Question 7 · medium

With TTIs on every case, a distributor can rotate stock by

  1. alphabetical order of products in the warehouse system
  2. largest case first
  3. least shelf life remaining, first out
  4. random selection
Answer and working

C. least shelf life remaining, first out

LSFO uses actual remaining life instead of printed dates.

Question 8 · medium

A date mark of 'keep refrigerated at or below 5 °C; use within 3 days of opening' is an example of

  1. an optional marketing claim
  2. storage conditions accompanying a date
  3. a sell-by date
  4. a nutrition claim
Answer and working

B. storage conditions accompanying a date

Dates are valid only under stated storage conditions, which must be given.

Question 9 · medium

Confusion between use-by and best-before dates contributes most to

  1. microbial growth in factories
  2. higher packaging costs only
  3. illegal export of food
  4. household food waste
Answer and working

D. household food waste

Consumers discard safe foods past best-before; clear dating reduces waste.

Question 10 · medium

Chocolate shelf life is commonly limited by

  1. Listeria growth
  2. fat bloom and sugar bloom
  3. rapid moisture loss to zero
  4. starch retrogradation
Answer and working

B. fat bloom and sugar bloom

Fat migration and polymorphic change, or surface sugar recrystallisation, dull the surface.

A study plan for Shelf-life Science & Food Stability in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (43% of the 72 questions): Shelf life of specific product groups (9, 13%); Microbial challenge tests and durability studies (8, 11%); Accelerated shelf-life testing and its limits (7, 10%); Packaging-limited shelf life and permeability calculations (7, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Sensory end-points and survival analysis (7, 10%); Time-temperature integrators (7, 10%); Kinetics of quality loss: zero- and first-order reactions (6, 8%); Temperature dependence: Arrhenius equation and Q10 (6, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Date marking: use-by, best-before and expiry (5, 7%); Shelf-life concepts: safety-limited and quality-limited shelf life (5, 7%); Water activity, sorption isotherms and moisture-limited shelf life (5, 7%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Water activity, sorption isotherms and moisture-limited shelf life (3 hard of 5), Packaging-limited shelf life and permeability calculations (4 hard of 7), Temperature dependence: Arrhenius equation and Q10 (3 hard of 6).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Accelerated shelf-life testing and its limits (1 easy of 7); Packaging-limited shelf life and permeability calculations (1 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Shelf-life Science & Food Stability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.