ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
12syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Risk Analysis: Risk Assessment, Management & Communication in ICAR AIEEA-PG / PGS
Short items within national and international food standards: the meaning of risk analysis, hazard versus risk, ADI and MRL, and the Codex expert bodies.
The Codex risk-analysis framework that underlies modern food standards: hazard identification and characterisation, exposure assessment, quantitative microbial and chemical risk assessment, food safety objectives and performance objectives, and risk communication.
Our 22 ICAR AIEEA-PG / PGS questions in this subject: 17 easy, 2 medium, 3 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · easy
The three components of risk analysis in the Codex framework are:
Monitoring, verification and validation
Assessment, management and communication
Inspection, licensing and prosecution
Hazard identification, sampling and recall
Answer and working
B. Assessment, management and communication
Codex defines risk analysis as assessment, management and communication; monitoring and verification belong to HACCP.
Question 2 · easy
What is the difference between a hazard and a risk?
A hazard is measured in laboratories; a risk is measured only in factories
A hazard is always chemical; a risk is always microbiological
Hazard is potential harm; risk is likely harm given exposure
There is no difference; the terms are interchangeable in Codex
Answer and working
C. Hazard is potential harm; risk is likely harm given exposure
Hazard is a property of an agent; risk depends on exposure.
Question 3 · easy
Hazard identification answers which question?
How many cases of illness occur each year?
How much of the agent do people eat each day?
What legal limit should be set for the agent?
Is the agent harmful and linked to this food?
Answer and working
D. Is the agent harmful and linked to this food?
Hazard identification is qualitative; exposure, risk estimates and limits come later.
Question 4 · hard
Why can a fatty food such as chocolate cause Salmonella illness at a low dose?
Fat converts Salmonella into a toxin in the gut
Fat lowers the water activity required for infection
Fat shields organisms from stomach acid
Fat makes Salmonella multiply rapidly at room temperature
Answer and working
C. Fat shields organisms from stomach acid
The matrix effect lets more organisms survive gastric acid.
Question 5 · medium
Microbial dose-response models usually assume that a single surviving organism:
Produces toxin only after cooking
Is enough to start an infection
Must combine with others before causing harm
Is harmless unless at least 10^6 are eaten
Answer and working
B. Is enough to start an infection
The single-hit assumption gives no-threshold models such as the exponential.
Question 6 · easy
Dietary exposure to a contaminant is calculated as:
Σ(C × consumption) / body weight
Consumption divided by concentration
Body weight multiplied by the MRL
Concentration divided by the ADI
Answer and working
A. Σ(C × consumption) / body weight
Exposure (mg/kg bw/day) = Σ(C × F) / bw.
Question 7 · easy
Quantitative microbial risk assessment usually follows a pathogen through:
The laboratory only
The marketing chain of advertisements
The food chain to the point of consumption
The legal process of prosecution
Answer and working
C. The food chain to the point of consumption
QMRA models changes from farm or process to consumption, then applies dose-response.
Question 8 · easy
Which is a process criterion that delivers a performance criterion?
An FSO at consumption
A cooking time and temperature
A consumer complaint rate
A cases-per-year target
Answer and working
B. A cooking time and temperature
Process criteria are the control parameters; product criteria include pH and aw.
Question 9 · easy
A risk profile is:
A problem and its context described
A list of fines for food businesses
A consumer's personal medical history
A full quantitative risk assessment
Answer and working
A. A problem and its context described
Prepared quickly from existing information to guide further risk management.
A study plan for Food Risk Analysis: Risk Assessment, Management & Communication in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (45% of the 22 questions): Hazard identification and hazard characterisation (3, 14%); The Codex risk-analysis framework (3, 14%); Dose-response models (2, 9%); Exposure assessment and dietary intake estimation (2, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Food safety objectives, performance objectives and performance criteria (2, 9%); Risk characterisation (2, 9%); Risk communication (2, 9%); Risk management options (2, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Chemical risk assessment and margin of exposure (1, 5%); Food safety surveillance and the role of FAO/WHO expert bodies (JECFA, JMPR, JEMRA) (1, 5%); Quantitative microbial risk assessment (1, 5%); Risk ranking and risk profiles (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Exposure assessment and dietary intake estimation (1 hard of 2), Risk communication (1 hard of 2), Hazard identification and hazard characterisation (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: The Codex risk-analysis framework (3 easy of 3); Food safety objectives, performance objectives and performance criteria (2 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.