LAISHA
Open Laisha

GATE XL Mechanical Unit Operations: Size Reduction, Mixing & Separation: practice questions

GATE — Life Sciences (XL), Section U Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
93written to this exam in this subject
15syllabus units

About GATE XL

GATE — Life Sciences (XL), Section U Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. Within XL, Section P Chemistry is understood to be compulsory and the candidate chooses two further sections, of which U Food Technology is one; this structure and the mark split are from earlier brochures and were not re-read for 2026.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Mechanical Unit Operations: Size Reduction, Mixing & Separation in GATE XL

Same Section 4 syllabus as XE-G; science graduates should practise the size-reduction, Stokes and filtration calculations and learn the equipment principles.

The mechanical operations that clean, sort, reduce, mix, homogenise and separate food materials, including filtration, centrifugation and membrane processes, with the design equations used to size them.

Our 93 GATE XL questions in this subject: 20 easy, 52 medium, 21 hard, across 15 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE XL and are not shown on any other exam's page.

Question 1 · medium

Flotation washing of peas separates sound peas from stones and heavy debris by differences in

  1. particle colour and gloss
  2. aerodynamic drag (terminal velocity) in still air
  3. magnetic properties
  4. buoyancy, from density
Answer and working

D. buoyancy, from density

In flotation, items of different density float or sink; froth flotation can also separate peas from weed seeds.

Question 2 · easy

In flash steam peeling of potatoes, the skin is removed mainly because

  1. hot alkali in the steam dissolves the potato skin within a few seconds
  2. abrasive rollers rub the skin off
  3. flames burn the outer layers away
  4. sudden pressure release flashes steam under the skin
Answer and working

D. sudden pressure release flashes steam under the skin

Steam under pressure heats the surface layer; on release, water under the skin flashes to vapour and blows the skin off.

Question 3 · hard

A material has a Bond work index of 12 kWh/t. Using E = 10 Wi(1/√x2 − 1/√x1) with x in µm, the energy to reduce it from 2,000 µm to 200 µm is closest to

  1. 0.58 kWh/t
  2. 5.8 kWh/t
  3. 0.54 kWh/t
  4. 3.7 kWh/t
Answer and working

B. 5.8 kWh/t

E = 120 × (0.0707 − 0.0224) = 5.8 kWh/t. 0.58 omits the factor 10; 0.54 uses 1/x instead of 1/√x; 3.7 uses √x instead of 1/√x.

Question 4 · hard

A screen receives 100 kg/h of feed with 40 % oversize material. The overflow is 38 kg/h containing 90 % oversize. The overall screen effectiveness is closest to

  1. 0.86
  2. 0.80
  3. 0.94
  4. 0.38
Answer and working

B. 0.80

Underflow = 62 kg/h with oversize fraction (40.0 − 34.2)/62 = 0.094. E_D = 38 × 0.90/40 = 0.855; E_B = 62 × (1 − 0.094)/60 = 0.937; E = 0.80. 0.86 and 0.94 are the single-stream effectivenesses; 0.38 is the overflow fraction of feed.

Question 5 · medium

In a valve homogeniser, droplets are broken up mainly by

  1. turbulence, shear and cavitation in the narrow gap
  2. freezing of the fat droplets
  3. enzymes that split the fat
  4. centrifugal force in a rotating bowl
Answer and working

A. turbulence, shear and cavitation in the narrow gap

High-pressure flow through the gap dissipates energy as intense turbulence, shear and cavitation.

Question 6 · medium

Filter aids such as diatomaceous earth are added mainly to

  1. dissolve the solids into the filtrate
  2. raise the viscosity of the filtrate
  3. sterilise the liquid during filtration
  4. keep compressible cakes porous and give clear filtrate
Answer and working

D. keep compressible cakes porous and give clear filtrate

As precoat and body feed, rigid porous filter aids maintain permeability and clarity.

Question 7 · hard

In the sigma (Σ) concept, Σ represents

  1. the total motor power of the centrifuge
  2. the volume of the solids holding space
  3. the number of discs in the stack
  4. the equivalent gravity settling area of the centrifuge
Answer and working

D. the equivalent gravity settling area of the centrifuge

Capacity = gravity settling velocity of the cut-size particle × Σ, allowing machines to be compared and scaled.

Question 8 · medium

Concentration polarisation in membrane filtration is reduced mainly by

  1. dead-end operation at high pressure
  2. raising the retentate concentration
  3. high cross-flow velocity over the membrane
  4. lowering the cross-flow velocity
Answer and working

C. high cross-flow velocity over the membrane

Cross-flow sweeps the boundary layer of retained solutes from the surface; dead-end operation builds a cake.

Question 9 · medium

Grinding sugar from 6 mm to 1 mm takes 10 kJ/kg. If Rittinger's law holds, grinding the same feed to 0.5 mm takes:

  1. 20 kJ/kg
  2. 22 kJ/kg
  3. 13.9 kJ/kg
  4. 18.3 kJ/kg
Answer and working

B. 22 kJ/kg

E ∝ (1/x₂ − 1/x₁): (1/0.5 − 1/6)/(1/1 − 1/6) = 1.833/0.833 = 2.2, so E = 22 kJ/kg. 20 kJ/kg ignores the feed size term. 13.9 kJ/kg applies Kick's law, ln(6/0.5)/ln(6/1). 18.3 kJ/kg forgets to divide by the first bracket (1/1 − 1/6).

Question 10 · medium

A milk fat globule of 4 µm diameter, 100 kg/m³ less dense than skim milk (μ = 2 mPa·s), moves under gravity by Stokes' law at about:

  1. 4.4 × 10⁻⁷ m/s, sinking
  2. 1.1 × 10⁻⁷ m/s, rising
  3. 4.4 × 10⁻⁷ m/s, rising
  4. 8.7 × 10⁻⁷ m/s, rising
Answer and working

C. 4.4 × 10⁻⁷ m/s, rising

v = d²Δρg/(18μ) = (4 × 10⁻⁶)² × 100 × 9.81 / (18 × 0.002) = 4.4 × 10⁻⁷ m/s, upward because fat is lighter; this is cream rising, about 1.6 mm per hour. Sinking has the wrong direction. 1.1 × 10⁻⁷ uses the radius in place of the diameter. 8.7 × 10⁻⁷ uses 9μ, from the radius form of the law with the diameter.

A study plan for Mechanical Unit Operations: Size Reduction, Mixing & Separation in GATE XL

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (45% of the 93 questions): Membrane processes: microfiltration, ultrafiltration, nanofiltration and reverse osmosis (10, 11%); Size reduction: energy laws of Rittinger, Kick and Bond (10, 11%); Filtration: cake filtration theory and filter aids (8, 9%); Centrifugation and centrifugal separators (7, 8%); Sieving and particle-size analysis (7, 8%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Expression and solid-liquid extraction (6, 6%); High-pressure homogenisation (6, 6%); Mixing of solids, pastes and liquids; agitation and power number (6, 6%); Settling and sedimentation (6, 6%); Cleaning, sorting and grading of raw materials (5, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Crystallisation (5, 5%); Distillation and supercritical fluid extraction (5, 5%); Peeling methods (5, 5%); Size-reduction equipment for dry and wet foods (4, 4%); Material handling: conveyors and elevators for foods (3, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Centrifugation and centrifugal separators (3 hard of 7), Membrane processes: microfiltration, ultrafiltration, nanofiltration and reverse osmosis (4 hard of 10), Filtration: cake filtration theory and filter aids (3 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Cleaning, sorting and grading of raw materials (2 easy of 5); Peeling methods (2 easy of 5).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE XL Mechanical Unit Operations: Size Reduction, Mixing & Separation

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.