LAISHA
Open Laisha

GATE XL Beverage Technology: Soft Drinks, Tea, Coffee, Cocoa & Alcoholic Beverages: practice questions

GATE — Life Sciences (XL), Section U Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
113written to this exam in this subject
12syllabus units

About GATE XL

GATE — Life Sciences (XL), Section U Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. Within XL, Section P Chemistry is understood to be compulsory and the candidate chooses two further sections, of which U Food Technology is one; this structure and the mark split are from earlier brochures and were not re-read for 2026.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Beverage Technology: Soft Drinks, Tea, Coffee, Cocoa & Alcoholic Beverages in GATE XL

Same syllabus as XE-G. Science graduates meet the microbiology side more often: yeast species for ale and lager, the microbial succession in cocoa fermentation, acetic acid bacteria in vinegar, lactic acid bacteria in malolactic fermentation and spoilage organisms in juices and beer.

Every major beverage: water treatment and carbonated soft drinks, tea, coffee and cocoa processing, and the brewing, winemaking and distilling of alcoholic drinks, with their quality control.

Our 113 GATE XL questions in this subject: 29 easy, 59 medium, 25 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE XL and are not shown on any other exam's page.

Question 1 · easy

In black tea manufacture, the term 'fermentation' refers to

  1. Enzymic oxidation of catechins by polyphenol oxidase
  2. Growth of yeasts that convert leaf sugars into ethanol
  3. Lactic acid bacteria acidifying the leaf in heaps
  4. Acetic acid bacteria oxidising alcohol on the leaf
Answer and working

A. Enzymic oxidation of catechins by polyphenol oxidase

Tea 'fermentation' is the long-established name for enzymic oxidation of catechins by the leaf's own polyphenol oxidase. It is not a microbial fermentation by yeasts, lactic or acetic acid bacteria.

Question 2 · medium

Which decaffeination route uses no organic solvent at all?

  1. Dichloromethane extraction of moistened beans
  2. Supercritical carbon dioxide extraction
  3. Ethyl acetate extraction of moistened beans
  4. Benzene extraction of moistened green beans
Answer and working

B. Supercritical carbon dioxide extraction

Supercritical CO2 extracts caffeine without an organic solvent. Dichloromethane and ethyl acetate are permitted organic solvents with residue limits; benzene was used historically and is no longer permitted.

Question 3 · easy

Fermented cocoa beans are dried for safe storage to a moisture content of about

  1. 7–8%
  2. 20–25%
  3. 1–2%
  4. 12–14%
Answer and working

A. 7–8%

About 7–8% moisture prevents mould growth in storage. 20–25% would mould, 12–14% is still too wet for cocoa, and 1–2% is unnecessarily low and makes beans brittle.

Question 4 · easy

Barley for malting is steeped until its moisture content reaches about

  1. 12–14%
  2. 42–46%
  3. 25–30%
  4. 70–75%
Answer and working

B. 42–46%

Steeping raises grain moisture to roughly 42–46% so germination and enzyme synthesis can proceed. 12–14% is stored-grain moisture, 25–30% is too low for even germination, and 70–75% would drown the grain.

Question 5 · medium

In mashing, β-amylase is most active at about

  1. 70–75 °C, giving mainly dextrins
  2. 45–50 °C, breaking down β-glucans
  3. 78–80 °C, during the mash-out rest
  4. 60–65 °C, giving fermentable maltose
Answer and working

D. 60–65 °C, giving fermentable maltose

β-amylase works best around 60–65 °C and cuts maltose units from starch ends, raising fermentability. α-amylase prefers 70–75 °C and gives dextrins; β-glucanase acts around 45–50 °C; mash-out at 78 °C stops most enzyme activity.

Question 6 · medium

A grape must contains 200 g/L of fermentable sugar. By the Gay-Lussac equation, the maximum ethanol it can yield is about (ethanol density 0.789 g/mL)

  1. 13.0% v/v
  2. 10.2% v/v
  3. 20.0% v/v
  4. 6.5% v/v
Answer and working

A. 13.0% v/v

Ethanol = 200 × (2 × 46.07/180.16) = 102.3 g/L; volume = 102.3/0.789 = 129.6 mL/L = 13.0% v/v. 10.2 stops at mass per volume (102 g/L as %); 20 assumes 1 g sugar gives 1 g ethanol; 6.5 halves the yield again.

Question 7 · medium

Fruit brandies generally contain more methanol than grain spirits because

  1. Pectin in fruit releases methanol by enzymic demethylation
  2. Fruit yeasts convert ethanol into methanol in the still
  3. Fruit contains starch that breaks down to methanol
  4. Copper in fruit-spirit stills catalyses methanol formation
Answer and working

A. Pectin in fruit releases methanol by enzymic demethylation

Pectin methylesterase hydrolyses methyl ester groups of pectin, releasing methanol, and fruit is rich in pectin. Yeasts do not convert ethanol to methanol, starch gives no methanol, and copper removes sulphur compounds rather than making methanol.

Question 8 · easy

Hop bitterness in beer develops mainly during wort boiling, when:

  1. β-acids oxidise to bitter resins
  2. Hop oils evaporate into the wort
  3. α-acids isomerise to soluble iso-α-acids
  4. Tannins combine with proteins as hot break
Answer and working

C. α-acids isomerise to soluble iso-α-acids

Humulones, the α-acids, are poorly soluble and not very bitter until boiling isomerises them to iso-humulones, the main bittering compounds. β-acids contribute little bitterness. Hop oils give aroma and are largely lost by evaporation in a long boil. Tannin-protein hot break affects clarity, not bitterness.

Question 9 · hard

Soft-drink plants reduce the bicarbonate alkalinity of their process water mainly because high alkalinity:

  1. Neutralises the acidulant and raises pH
  2. Causes the drink to foam over at the filler
  3. Turns the drink cloudy by precipitating sugar
  4. Removes dissolved CO₂ by reacting with it
Answer and working

A. Neutralises the acidulant and raises pH

Bicarbonate consumes citric or phosphoric acid, so the drink tastes flat and its higher pH weakens preservatives and microbial stability; lime softening or ion exchange is used to reduce it. Foaming at the filler depends on temperature and nucleation, not alkalinity. Sugar does not precipitate. Bicarbonate does not remove CO₂; acid added to bicarbonate actually releases some.

Question 10 · easy

A ready-to-serve orange drink has 12 °Brix and 0.8% titratable acidity as citric acid. Its Brix-to-acid ratio is:

  1. 9.6
  2. 15
  3. 12.8
  4. 0.067
Answer and working

B. 15

Brix/acid ratio = 12/0.8 = 15, a common index of sweetness balance. 9.6 multiplies the two. 12.8 adds them. 0.067 inverts the ratio.

A study plan for Beverage Technology: Soft Drinks, Tea, Coffee, Cocoa & Alcoholic Beverages in GATE XL

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (37% of the 113 questions): Wine making: red, white and fortified wines (12, 11%); Coffee processing: wet and dry methods, roasting and instant coffee (10, 9%); Distilled spirits: distillation and maturation (10, 9%); Fruit wines, cider and traditional fermented beverages (10, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Malting and brewing: mashing, boiling, fermentation and maturation (10, 9%); Carbonated soft drinks: formulation, carbonation and filling (9, 8%); Cocoa processing: fermentation, drying and roasting (9, 8%); Quality control and legal standards for beverages (9, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Tea processing: black, green and oolong; instant tea (9, 8%); Water for beverages: treatment and quality (9, 8%); Beverage packaging and stability (8, 7%); Functional, sports and energy drinks (8, 7%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Distilled spirits: distillation and maturation (3 hard of 10), Beverage packaging and stability (2 hard of 8), Functional, sports and energy drinks (2 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Tea processing: black, green and oolong; instant tea (4 easy of 9); Malting and brewing: mashing, boiling, fermentation and maturation (4 easy of 10).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE XL Beverage Technology: Soft Drinks, Tea, Coffee, Cocoa & Alcoholic Beverages

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.