GATE XL Bakery, Pasta & Snack Food Technology: practice questions
GATE — Life Sciences (XL), Section U Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papers
10worked here, free
32written to this exam in this subject
12syllabus units
About GATE XL
GATE — Life Sciences (XL), Section U Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. Within XL, Section P Chemistry is understood to be compulsory and the candidate chooses two further sections, of which U Food Technology is one; this structure and the mark split are from earlier brochures and were not re-read for 2026.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Bakery, Pasta & Snack Food Technology in GATE XL
Same Section 3 content, often framed through chemistry: gluten, starch gelatinisation and retrogradation, Maillard reactions, leavening acids.
The science of bread, biscuits, cakes, pasta and snacks: ingredient functions, dough development, fermentation, baking, staling, and frying of snacks, with the defects and their causes.
Our 32 GATE XL questions in this subject: 16 easy, 11 medium, 5 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to GATE XL and are not shown on any other exam's page.
Question 1 · medium
A baker wants a dough at 27 °C. Flour is at 25 °C, the room at 28 °C and the mixer friction factor is 10 °C. Using the three-factor rule, what water temperature is needed?
18 °C
27 °C
36 °C
8 °C
Answer and working
A. 18 °C
Water = 3 × 27 − (25 + 28 + 10) = 81 − 63 = 18 °C.
Question 2 · easy
Rotary moulding is used mainly for which biscuit doughs?
Laminated cracker doughs
Hard, elastic doughs
Soft, short doughs
Wafer batters
Answer and working
C. Soft, short doughs
Short doughs are pressed into engraved cavities.
Question 3 · easy
In foam (sponge) cakes, aeration comes mainly from:
Yeast fermentation
Whipped egg foam
Creaming of fat and sugar
Kneaded gluten
Answer and working
B. Whipped egg foam
Shortened cakes rely on creaming.
Question 4 · easy
In shortened (butter) cakes, air is incorporated mainly by:
Yeast fermentation
Steam injection
Creaming fat with sugar
Whipping egg whites alone
Answer and working
C. Creaming fat with sugar
Sugar crystals cut air into the fat.
Question 5 · easy
Traditional Italian dried pasta is made from:
Durum wheat semolina and water
Rice flour and alkaline salts
Maize grits and lime
Common wheat flour, yeast and salt
Answer and working
A. Durum wheat semolina and water
Durum gives colour and firm texture.
Question 6 · medium
Pasta dough is mixed under vacuum mainly to:
Prevent yeast fermentation
Dry the pasta before extrusion
Increase the protein content
Remove air bubbles
Answer and working
D. Remove air bubbles
Air bubbles weaken and discolour the product.
Question 7 · easy
A 480 g loaf has a volume of 2,400 cm³. What is its specific volume?
0.2 cm³/g
50 cm³/g
5.0 cm³/g
2,880 cm³/g
Answer and working
C. 5.0 cm³/g
2,400/480 = 5.0. 0.2 inverts the ratio.
Question 8 · easy
Besides flavour, salt at 1.5 to 2% of flour weight in bread dough:
Strengthens gluten and slows yeast fermentation
Weakens the gluten and speeds yeast fermentation
Provides the main sugar for the yeast
Acts as the main leavening agent
Answer and working
A. Strengthens gluten and slows yeast fermentation
Salt shields charges on gluten proteins, giving a tighter, stronger network, and its osmotic effect slows yeast, controlling fermentation. It does not weaken gluten or speed fermentation. It is not a sugar source. Leavening comes from yeast CO₂.
Question 9 · hard
In frying potato chips, most of the oil ends up in the product:
Early in frying, while water boils off fastest
When the oil temperature first drops on loading
At random, independent of the frying stage
During cooling, after the chips leave the fryer
Answer and working
D. During cooling, after the chips leave the fryer
While steam flows out, it keeps oil from entering pores; when the product is removed and cools, vapour condenses, pressure in the pores falls and surface oil is drawn in by capillary action. Vigorous steam escape early in frying opposes oil entry. Oil temperature drop on loading is not the main point of uptake. Uptake is not random; it depends on stage and surface oil.
Question 10 · easy
Kansui, a solution of sodium and potassium carbonates, is added to Chinese alkaline noodles to:
Ferment the dough before sheeting
Give a yellow colour and a firm, elastic bite
Bleach the flour to a whiter colour
Prevent starch gelatinisation during cooking
Answer and working
B. Give a yellow colour and a firm, elastic bite
The high pH turns flour flavonoids yellow and strengthens the protein network, giving the characteristic colour and springy texture. Kansui does not ferment the dough. It yellows, not whitens. Starch still gelatinises on cooking.
A study plan for Bakery, Pasta & Snack Food Technology in GATE XL
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (44% of the 32 questions): Cakes and batters (4, 13%); Functions of bakery ingredients: flour, water, yeast, salt, sugar, fat and improvers (4, 13%); Biscuits, cookies and crackers (3, 9%); Deep-fat frying: heat and mass transfer and oil uptake (3, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Dough development and fermentation (3, 9%); Pasta and noodle technology (3, 9%); Snack foods: chips, extruded and fried snacks (3, 9%); Staling and its control (3, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Baking: heat transfer and physicochemical changes (2, 6%); Bread-making processes: straight dough, sponge-and-dough and continuous (2, 6%); Bakery equipment and quality control (1, 3%); Gluten-free and high-fibre bakery products (1, 3%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Deep-fat frying: heat and mass transfer and oil uptake (2 hard of 3), Baking: heat transfer and physicochemical changes (1 hard of 2), Dough development and fermentation (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Bakery equipment and quality control (1 easy of 1); Functions of bakery ingredients: flour, water, yeast, salt, sugar, fat and improvers (3 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.