ICAR AICE-JRF/SRF Bakery, Pasta & Snack Food Technology: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Bakery, Pasta & Snack Food Technology in ICAR AICE-JRF/SRF
Deeper questions on staling mechanisms and enzymes, gluten-free formulation, pasta drying, frying heat and mass transfer and oil uptake, and acrylamide mitigation.
The science of bread, biscuits, cakes, pasta and snacks: ingredient functions, dough development, fermentation, baking, staling, and frying of snacks, with the defects and their causes.
Our 22 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 4 medium, 18 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Why is L-cysteine or sodium metabisulphite added to some biscuit and cracker doughs?
To prevent mould growth in the packed biscuits
To strengthen gluten for higher volume
To feed yeast in long fermentations
To relax the gluten
Answer and working
D. To relax the gluten
Reducing agents break disulphide bonds, relaxing hard doughs.
Question 2 · hard
In lean bread dough without added sugar, yeast continues to produce gas during proof mainly from:
Maltose from starch hydrolysis
Lactose naturally present in the flour
Glycerol formed from fat
Sucrose from the bran
Answer and working
A. Maltose from starch hydrolysis
Free sugars are used first, then maltose from starch hydrolysis.
Question 3 · hard
During baking, closed gas cells in dough become an interconnected sponge because:
Yeast digests the walls between cells
Steam injection dissolves the crumb
Fat melts and dissolves the gluten
Cells rupture as the structure sets
Answer and working
D. Cells rupture as the structure sets
The foam converts to a sponge, giving open crumb.
Question 4 · hard
Why is steam injected at the start of baking for some breads?
To cool the dough and slow oven spring
To kill the yeast before baking starts
To delay crust setting
To dissolve sugar on the crust and stop browning
Answer and working
C. To delay crust setting
Condensing steam keeps the surface extensible and gelatinises surface starch.
Question 5 · hard
Radio-frequency post-baking dryers reduce checking because they:
Add moisture to the biscuit edges
Dry the moist centre preferentially
Melt the fat to fill the cracks
Cool biscuits rapidly to room temperature
Answer and working
B. Dry the moist centre preferentially
Uniform moisture removes the gradient that causes stress.
Question 6 · hard
Why are gluten-free breads made from batters rather than doughs?
Batters prevent cross-contact with wheat
Doughs cannot be baked without gluten
Gluten-free flours contain too much protein
No gluten network forms a dough
Answer and working
D. No gluten network forms a dough
Viscous batters with hydrocolloids hold gas instead.
Question 7 · hard
Transglutaminase is used in some gluten-free products to:
Cross-link proteins
Hydrolyse starch to sugars
Break down phytate
Prevent Maillard browning
Answer and working
A. Cross-link proteins
It forms covalent bonds between protein chains.
Question 8 · medium
Kettle chips are harder and crunchier than continuously fried chips because:
They are baked rather than fried
They are fried at much higher constant temperatures
Oil temperature drops in batch frying
They are made from dehydrated potato dough
Answer and working
C. Oil temperature drops in batch frying
The temperature profile changes texture.
Question 9 · hard
Too low a frying temperature generally causes:
Less oil uptake and darker colour
More oil uptake and pale colour
Burnt surfaces and raw centres
Faster oil degradation and smoking
Answer and working
B. More oil uptake and pale colour
Too high a temperature burns the surface and degrades oil.
Question 10 · hard
Why are statistical process control charts used for loaf weight?
A study plan for Bakery, Pasta & Snack Food Technology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (41% of the 22 questions): Gluten-free and high-fibre bakery products (3, 14%); Bakery equipment and quality control (2, 9%); Baking: heat transfer and physicochemical changes (2, 9%); Cakes and batters (2, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Deep-fat frying: heat and mass transfer and oil uptake (2, 9%); Dough development and fermentation (2, 9%); Pasta and noodle technology (2, 9%); Snack foods: chips, extruded and fried snacks (2, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Staling and its control (2, 9%); Biscuits, cookies and crackers (1, 5%); Bread-making processes: straight dough, sponge-and-dough and continuous (1, 5%); Functions of bakery ingredients: flour, water, yeast, salt, sugar, fat and improvers (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Baking: heat transfer and physicochemical changes (2 hard of 2), Deep-fat frying: heat and mass transfer and oil uptake (2 hard of 2), Dough development and fermentation (2 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.