GATE XE Bakery, Pasta & Snack Food Technology: practice questions
GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
11syllabus units
About GATE XE
GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Bakery, Pasta & Snack Food Technology in GATE XE
Section 3 names bread, biscuits, extruded products and potato chips. Expect MCQs on ingredient functions, bread-making methods, oven spring and staling, biscuit dough types, extrusion and chip processing, and NATs on baker's percentages, baking loss, specific volume, dough water temperature and oil content.
The science of bread, biscuits, cakes, pasta and snacks: ingredient functions, dough development, fermentation, baking, staling, and frying of snacks, with the defects and their causes.
Our 22 GATE XE questions in this subject: 13 easy, 6 medium, 3 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to GATE XE and are not shown on any other exam's page.
Question 1 · easy
A dough contains 1,000 g flour and 18 g salt. What is the salt level in baker's percentage?
18%
1.77%
1.8%
0.18%
Answer and working
C. 1.8%
18/1,000 × 100 = 1.8%. 1.77% would be salt as a share of flour plus salt.
Question 2 · medium
Ascorbic acid improves bread dough because in the dough it is converted to:
Sodium ascorbate, which acts as a reducing agent
Glucose, which feeds the yeast
Dehydroascorbic acid, which acts as an oxidant
Citric acid, which lowers the pH
Answer and working
C. Dehydroascorbic acid, which acts as an oxidant
Dehydroascorbic acid promotes disulphide cross-links in gluten.
Question 3 · easy
In the sponge-and-dough method, the sponge consists of:
Part of the flour, water and yeast, pre-fermented
Only fat, sugar and eggs whipped to a foam
Flour and salt mixed without any water
All ingredients mixed together and fermented once
Answer and working
A. Part of the flour, water and yeast, pre-fermented
The sponge is fermented, then mixed with the remaining ingredients.
Question 4 · easy
Oven spring is:
The rise of dough during final proof
Rapid early expansion in the oven
Shrinkage of bread after removal from the oven
The crust colour formed at the end of baking
Answer and working
B. Rapid early expansion in the oven
Gas expansion, CO2 release, vaporisation and yeast activity cause it.
Question 5 · hard
A 560 g dough piece gives a 500 g loaf. What is the baking loss?
60 g per kg
89.3%
10.7%
12.0%
Answer and working
C. 10.7%
(560 − 500)/560 × 100 = 10.7%. 12.0% divides by the loaf weight instead of the dough.
Question 6 · easy
The main cause of crumb firming in bread staling is:
Loss of water from the loaf
Oxidation of flour lipids
Growth of mould on the crust
Retrogradation of amylopectin
Answer and working
D. Retrogradation of amylopectin
Bread stales even in moisture-proof packs.
Question 7 · medium
At which storage temperature does bread stale fastest?
About 0–5 °C
About 40 °C
About −20 °C
About 25 °C
Answer and working
A. About 0–5 °C
Refrigeration accelerates retrogradation; freezing almost stops it.
Question 8 · easy
Semi-sweet biscuits and crackers are made from which type of dough?
Hard dough with developed gluten
Fermented batter cooked on a griddle
Soft (short) dough with little gluten
Thin batter baked between plates
Answer and working
A. Hard dough with developed gluten
Short doughs are used for cookies and shortcakes; batters for wafers.
Question 9 · easy
Potatoes for chips should have:
High moisture and high sucrose
Low specific gravity and high reducing sugars
High specific gravity and low reducing sugars
Low starch and high protein
Answer and working
C. High specific gravity and low reducing sugars
High solids give yield and low oil; low sugars limit browning and acrylamide.
Question 10 · hard
Most oil is taken up by fried foods:
After removal, as steam condenses
Only when frying oil is very fresh
During the first second of immersion
Only in foods with no water
Answer and working
A. After removal, as steam condenses
Falling pressure in pores draws surface oil in.
A study plan for Bakery, Pasta & Snack Food Technology in GATE XE
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (41% of the 22 questions): Functions of bakery ingredients: flour, water, yeast, salt, sugar, fat and improvers (3, 14%); Baking: heat transfer and physicochemical changes (2, 9%); Biscuits, cookies and crackers (2, 9%); Bread-making processes: straight dough, sponge-and-dough and continuous (2, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Cakes and batters (2, 9%); Deep-fat frying: heat and mass transfer and oil uptake (2, 9%); Dough development and fermentation (2, 9%); Pasta and noodle technology (2, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Snack foods: chips, extruded and fried snacks (2, 9%); Staling and its control (2, 9%); Bakery equipment and quality control (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Baking: heat transfer and physicochemical changes (1 hard of 2), Deep-fat frying: heat and mass transfer and oil uptake (1 hard of 2), Dough development and fermentation (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Biscuits, cookies and crackers (2 easy of 2); Cakes and batters (2 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.