LAISHA
Open Laisha

GATE XE Spices, Herbs, Essential Oils & Flavour Technology: practice questions

GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
43written to this exam in this subject
6syllabus units

About GATE XE

GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Spices, Herbs, Essential Oils & Flavour Technology in GATE XE

Section 3 lists spices and extraction of essential oils and oleoresins. Expect short reasoning items on steam distillation (why oils distil below 100 °C, oil-to-water ratio), oleoresin versus essential oil, supercritical CO2 conditions, cryogenic grinding, and the active principles of the major spices; numerical-answer items on oil and oleoresin yield, drying yield and moisture balances.

Processing spices and herbs, extracting essential oils and oleoresins, and the technology of natural and synthetic flavours and food colours, including encapsulation and flavour stability.

Our 43 GATE XE questions in this subject: 13 easy, 22 medium, 8 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE XE and are not shown on any other exam's page.

Question 1 · medium

Freshly crushed mustard seed becomes pungent only after water is added. The pungent compound is formed when

  1. Alliinase converts alliin to allicin
  2. Lipoxygenase oxidises linoleic acid
  3. Myrosinase acts on sinigrin
  4. Polyphenol oxidase oxidises catechins
Answer and working

C. Myrosinase acts on sinigrin

Mustard stores sinigrin, a glucosinolate; when cells are broken in water, myrosinase hydrolyses it to allyl isothiocyanate. Alliinase and alliin belong to garlic, lipoxygenase produces green notes from fats, and polyphenol oxidase browns fruit and tea.

Question 2 · easy

Turmeric rhizomes are boiled or steamed before drying mainly to

  1. Gelatinise starch, even out the colour
  2. Extract the curcumin into the cooking water
  3. Ferment the rhizome to develop its aroma
  4. Remove the volatile oil before drying
Answer and working

A. Gelatinise starch, even out the colour

Boiling or steaming softens the rhizome, gelatinises starch, distributes the yellow colour evenly and kills the rhizome, giving a uniform, hard, bright product after drying and polishing. Curcumin is not deliberately extracted into the water, curing is not a fermentation, and volatile oil removal is not the aim.

Question 3 · medium

Pepper berries are often dipped in hot water for about a minute before sun drying. Which benefit is NOT a reason for this step?

  1. It cleans the berries and lowers the microbial load
  2. It gives a more uniform black colour
  3. It raises the piperine content of the berries
  4. It speeds and evens the drying
Answer and working

C. It raises the piperine content of the berries

The hot-water dip cleans the berries, reduces microbes, speeds drying and promotes uniform browning of the skin. It does not synthesise piperine, whose content is fixed by variety and maturity.

Question 4 · medium

100 kg of fresh turmeric at 80% moisture (wet basis) is cured and dried to 10% moisture (wet basis). Ignoring dry-matter losses, the dried yield is

  1. 22.2 kg
  2. 20.0 kg
  3. 25.0 kg
  4. 11.1 kg
Answer and working

A. 22.2 kg

Dry matter = 100 × 0.20 = 20 kg; dried mass = 20 ÷ 0.90 = 22.2 kg. 20.0 kg is bone-dry solids; 25.0 kg divides 20 by 0.80; 11.1 kg divides the final moisture fraction (10 ÷ 0.90).

Question 5 · hard

Steam sterilisation of ground spices does not make a lot safe if the raw material was mouldy before drying, because

  1. Mycotoxins already formed are not destroyed
  2. Steam cannot reach the inside of particles
  3. Mould spores are fully resistant to steam
  4. Steam converts aflatoxin into more toxic forms
Answer and working

A. Mycotoxins already formed are not destroyed

Steam treatment kills vegetative cells and many spores, but aflatoxins and ochratoxin A are heat-stable and survive. Prevention by quick, clean drying and dry storage is the control. Steam does reach ground particles, mould spores are killed by adequate steam treatment, and steam does not make aflatoxins more toxic.

Question 6 · easy

Which cleaning equipment separates light, hollow pepper berries from sound ones?

  1. Magnetic separator
  2. Metal detector
  3. Aspirator using an air stream
  4. Rotary sieve of fixed mesh
Answer and working

C. Aspirator using an air stream

An aspirator lifts light material in an air stream while heavy, sound berries fall. Magnets and metal detectors remove ferrous and other metal, and a sieve separates by size, not density.

Question 7 · medium

Cryogenic grinding prevents mill clogging with oily spices such as clove mainly because

  1. The fat and oil stay solid and brittle
  2. Nitrogen dissolves the oil from the spice
  3. Cold air carries the oil out of the mill
  4. The spice is dried completely by nitrogen
Answer and working

A. The fat and oil stay solid and brittle

Below the temperature at which their fat solidifies, oily spices fracture cleanly instead of smearing. Nitrogen does not dissolve or carry away the oil, and cooling does not dry the spice.

Question 8 · medium

Steam distillation recovers high-boiling essential oil components at temperatures below 100 °C because

  1. Steam lowers the boiling points of the oil compounds by dissolving them
  2. The vapour pressures of oil and water add to the external pressure
  3. Oil compounds form a high-boiling azeotrope with water
  4. The plant tissue catalyses the vaporisation of the oil
Answer and working

B. The vapour pressures of oil and water add to the external pressure

Water and oil are immiscible, so each exerts its own vapour pressure; the mixture boils when the sum reaches atmospheric pressure, slightly below 100 °C. The oil does not dissolve in steam, an azeotrope would not explain the lower temperature, and tissue catalysis is not involved.

Question 9 · medium

500 g of ground cardamom gives 15 mL of oil by Clevenger hydrodistillation. The volatile oil content is

  1. 0.3% v/w
  2. 33% v/w
  3. 1.5% v/w
  4. 3.0% v/w
Answer and working

D. 3.0% v/w

15 mL ÷ 500 g × 100 = 3.0 mL per 100 g, that is 3.0% v/w. 0.3% misplaces the decimal; 33% inverts the ratio (500/15); 1.5% halves the result.

Question 10 · medium

In conventional oleoresin manufacture, the solvent is removed

  1. Vacuum distillation at low temperature
  2. By freezing the miscella and filtering off the solvent
  3. By washing the extract repeatedly with water
  4. By adding alcohol to precipitate the solvent
Answer and working

A. Vacuum distillation at low temperature

The miscella is distilled to recover solvent, with a final vacuum stage to remove residues at low temperature and protect volatiles; residue limits are set by regulation. Freezing, washing or alcohol precipitation would not remove the solvent.

A study plan for Spices, Herbs, Essential Oils & Flavour Technology in GATE XE

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (40% of the 43 questions): Spice processing: cleaning, drying, grinding and sterilisation (9, 21%); Essential oils: steam distillation and other extraction methods (8, 19%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Major spices: composition and active principles (8, 19%); Oleoresins: solvent and supercritical CO2 extraction (8, 19%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Cryogenic grinding (7, 16%); Quality standards and adulteration of spices (3, 7%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Spice processing: cleaning, drying, grinding and sterilisation (3 hard of 9), Quality standards and adulteration of spices (1 hard of 3), Essential oils: steam distillation and other extraction methods (2 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Major spices: composition and active principles (5 easy of 8); Cryogenic grinding (2 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE XE Spices, Herbs, Essential Oils & Flavour Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.