LAISHA
Open Laisha

Tamil Nadu PSC — Agricultural Engineering (Code 164, degree standard)

India · Tamil Nadu Public Service Commission

703practice questions written to this syllabus
18subjects

What Tamil Nadu PSC is

Tamil Nadu PSC — Agricultural Engineering (Code 164, degree standard) is a government recruitment exam run by Tamil Nadu Public Service Commission, for candidates in India.

Format

Degree-standard subject paper (for posts such as Assistant Engineer (Agri)).

Sections

How it has changed

Units I–V were read; later units on farm power, machinery and processing were not fully captured.

How to prepare for Tamil Nadu PSC

Where our 703 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (52% of the questions): Remote Sensing, GIS & GNSS for Land & Water (92); Surveying & Levelling (86); Soil & Water Conservation Engineering (51); Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (50); Sprinkler & Micro-Irrigation Systems (45); Fluid Mechanics & Open Channel Hydraulics (44).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Water Resources Management, Floods & Canal Systems (43); Building Materials, Theory of Structures & Construction (41); Watershed Planning & Management (41); Watershed Hydrology (37); Agricultural Structures & Environmental Control (35); Soil Science for Engineers (31).

    One pass per subject, then mixed sets across them.

  3. Lighter: Agricultural Drainage Engineering (29); Soil Mechanics (26); Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (17); Farm Machinery Management & Economics (13); Groundwater, Wells & Pumps (13); Storage Engineering, Material Handling & Packaging (9).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Remote Sensing, GIS & GNSS for Land & Water (15 hard of 92), Water Resources Management, Floods & Canal Systems (6 hard of 43), Soil Mechanics (3 hard of 26).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: tnpsc.gov.in

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. A distributary has a culturable command area of 20,000 ha. The intensity of irrigation in the peak season is 60 % and the duty at its head is 1,500 ha/cumec. What discharge must it carry?

  1. 4.8 m³/s
  2. 8.0 m³/s
  3. 13.3 m³/s
  4. 0.8 m³/s
Answer and working

B. 8.0 m³/s

Irrigated area = 0.60 × 20,000 = 12,000 ha; Q = 12,000 / 1,500 = 8.0 m³/s. 13.3 ignores intensity; 0.8 is a decimal slip; 4.8 applies intensity twice.

Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) · Command area development

2. Why do most watershed programmes require beneficiaries to contribute part of the cost of works on private land?

  1. It is the main source of finance for the project, covering most of the cost of the engineering works
  2. It allows the agency to exclude poor farmers who cannot pay, so that only commercial farms are treated
  3. It tests genuine demand and builds a fund and a sense of ownership for maintenance after the project
  4. It replaces the need for any technical design
Answer and working

C. It tests genuine demand and builds a fund and a sense of ownership for maintenance after the project

Contribution in cash or labour signals that farmers want the work, and the collected money commonly goes into a watershed development fund for later maintenance. Programmes set lower rates for small and marginal and disadvantaged farmers precisely so the poor are not excluded.

Watershed Planning & Management · Participatory watershed planning

3. On a 20% slope the soil is deep enough to allow at most 0.5 m of cut at the inner edge of a level bench (vertical risers, balanced cut and fill). The widest bench that can be built without cutting below this depth is:

  1. 5.0 m
  2. 0.2 m
  3. 1.0 m
  4. 2.5 m
Answer and working

A. 5.0 m

For a balanced level bench, the cut at the inner edge is VI/2. Cut ≤ 0.5 m gives VI ≤ 1.0 m. W = 100 VI/S = 100 × 1.0/20 = 5.0 m. Treating 0.5 m as the VI gives 2.5 m, an unnecessarily narrow bench. 0.2 m multiplies VI by S/100 instead of dividing.

Soil & Water Conservation Engineering · Bench and broad-base terraces

4. On a land capability map, a mapping unit labelled 'IIIe' means:

  1. cultivable land with severe limitations, erosion hazard being the dominant one
  2. non-arable land where erosion is the only limitation
  3. cultivable land with moderate limitations due to excess water
  4. land suitable only for grazing because of shallow soils and a severe erosion hazard
Answer and working

A. cultivable land with severe limitations, erosion hazard being the dominant one

Class III is arable but has severe limitations that reduce the choice of crops or need special conservation practices; the subclass e shows that erosion hazard is the dominant limitation. Moderate limitations define class II, and w would denote wetness.

Watershed Planning & Management · Land capability classification

5. What does the economic pipe size minimise?

  1. Pipe cost alone
  2. Friction loss alone
  3. Water velocity alone
  4. The sum of annualised pipe cost and annual pumping energy cost
Answer and working

D. The sum of annualised pipe cost and annual pumping energy cost

Larger pipes cost more but save energy by reducing friction. The economic size is the one with the least total annual cost; minimising pipe cost alone leads to high energy bills, and minimising friction alone leads to oversized pipes.

Sprinkler & Micro-Irrigation Systems · Economics of pressurised irrigation

6. What is the measurement book used for in public works?

  1. Recording the results of cube tests for the quality-control laboratory only
  2. Recording the specifications of each item before the tender is invited
  3. Recording measurements of work done and materials received, as the basis for payments
  4. Recording the names and wages of daily labourers for the contractor's payroll
Answer and working

C. Recording measurements of work done and materials received, as the basis for payments

The measurement book is the original record of quantities measured by the engineer; running and final bills are prepared from it, and auditors check against it. Payroll, specifications and test registers are separate records.

Building Materials, Theory of Structures & Construction · Specifications and contracts

7. A graded border is best described as:

  1. Small channels between crop rows
  2. A closed pipe with outlets at each plant
  3. A long strip bounded by dikes, sloping along its length with no cross slope
  4. A level area enclosed by dikes on all sides and filled rapidly to a set depth
Answer and working

C. A long strip bounded by dikes, sloping along its length with no cross slope

Borders are strips with a longitudinal slope and zero cross slope so the sheet of water spreads evenly across. The level enclosed area is a basin, row channels are furrows, and the pipe describes drip.

Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) · Border irrigation

8. A channel with bed width 4 m and side slopes 1.5:1 (H:V) has centre depths of 1.0, 1.6 and 2.2 m at chainages 30 m apart, ground level across. What is the volume of cut by the trapezoidal (average end area) formula?

  1. 625.2 m³
  2. 954.0 m³
  3. 646.8 m³
  4. 630.6 m³
Answer and working

D. 630.6 m³

Areas: 5.50, 10.24, 16.06 m². V = d[(A1 + A3)/2 + A2] = 30[(5.50 + 16.06)/2 + 10.24] = 630.6 m³. The prismoidal value is 625.2 m³; ignoring the middle section gives 646.8 m³. 954.0 m³ adds all three areas without halving the end sections.

Surveying & Levelling · Earthwork volume computation

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 703 questions — Tamil Nadu PSC — Agricultural Engineering (Code 164, degree standard)

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.