LAISHA
Open Laisha

ICAR AICE-JRF/SRF Dairy Packaging: practice questions

ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
51written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Dairy Packaging in ICAR AICE-JRF/SRF

Subject 37 Unit 2: materials, selection, testing, adhesives, graphics, coding and labelling, protective packaging, active packaging, dairy product packaging, MAP and CAP, shrink and stretch packaging, retort pouches, biodegradable and edible packages, distribution packaging, safety and migration. Subject 38 Unit 3: permeability and shelf life, permeability of multilayer materials and measurement methods.

Packaging materials, forms and machines for milk and dairy products, aseptic packaging, shelf-life testing, labelling and sustainability. The agricultural engineering track (storage-engineering-packaging) covers general packaging engineering.

Our 51 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 32 medium, 18 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

A pack has 0.05 m² of film with an OTR of 10 cm³/m²·day. If the product tolerates 10 cm³ of oxygen, roughly how many days does it last on oxygen grounds?

  1. 20 days
  2. 2 days
  3. 0.5 days
  4. 200 days
Answer and working

A. 20 days

Ingress = 0.05 × 10 = 0.5 cm³/day; 10 ÷ 0.5 = 20 days. 0.5 is the daily ingress; 2 and 200 slip by ten.

Question 2 · medium

A paperboard sample of 0.01 m² weighs 2.5 g. What is its grammage?

  1. 250 g/m²
  2. 2.5 g/m²
  3. 25 g/m²
  4. 2,500 g/m²
Answer and working

A. 250 g/m²

2.5 ÷ 0.01 = 250 g/m². The others slip by factors of ten.

Question 3 · medium

A powder pouch has 0.08 m² of film with a WVTR of 0.5 g/m²·day. How much water vapour enters in 30 days at test conditions?

  1. 15 g
  2. 1.2 g
  3. 12 g
  4. 0.04 g
Answer and working

B. 1.2 g

0.08 × 0.5 × 30 = 1.2 g. 0.04 g is per day; 12 g slips a decimal; 15 g ignores the area.

Question 4 · medium

Polystyrene is used for yoghurt cups mainly because it:

  1. Is fully recyclable everywhere
  2. Withstands retorting
  3. Thermoforms easily
  4. Is the best oxygen barrier
Answer and working

C. Thermoforms easily

PS forms well but is brittle and seldom recycled.

Question 5 · medium

Taint testing of packaging compares:

  1. Film thickness before and after printing it
  2. Product stored with and without the material
  3. Prices of competing suppliers
  4. Two different OTR instruments
Answer and working

B. Product stored with and without the material

Sensory panels detect transferred odours.

Question 6 · medium

Vacuum decay and bubble emission tests detect:

  1. Migration of additives
  2. Ink adhesion
  3. Light transmission
  4. Pack leaks
Answer and working

D. Pack leaks

Integrity tests find holes and poor seals.

Question 7 · medium

Why is light protection critical for milk in clear bottles?

  1. Light makes the bottle brittle and cloudy
  2. Retail light causes off-flavour within hours
  3. Light breaks seals
  4. Light raises milk fat
Answer and working

B. Retail light causes off-flavour within hours

Riboflavin-sensitised oxidation acts quickly.

Question 8 · medium

Aseptic packaging allows paperboard packs for UHT milk because:

  1. Paperboard is sterile when made
  2. The pack is not heated with the product
  3. Paperboard withstands retort temperatures
  4. UHT milk needs no package barrier
Answer and working

B. The pack is not heated with the product

Only product and pack are sterilised separately.

Question 9 · medium

Freezer burn on ice cream results from:

  1. Moisture loss by sublimation
  2. Light exposure
  3. Excess sugar
  4. Bacterial growth on the surface
Answer and working

A. Moisture loss by sublimation

Packs must limit water vapour loss.

Question 10 · medium

An oxygen indicator in a MAP pack changes colour to show:

  1. Fat oxidation
  2. Expiry
  3. A leak
  4. Temperature abuse
Answer and working

C. A leak

Oxygen entering signals failed integrity.

A study plan for Dairy Packaging in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (47% of the 51 questions): Aseptic packaging and package sterilisation (6, 12%); Barrier properties and permeability (6, 12%); Modified atmosphere, vacuum and shrink packaging (6, 12%); Testing of packaging materials (6, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Active and intelligent packaging (5, 10%); Materials: glass, metal, paper, plastics, laminates (5, 10%); Migration and food-contact safety (4, 8%); Pouch, bottle and carton filling of milk (4, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Packaging of butter, cheese, powders, ice cream and fermented milks (3, 6%); Packaging waste, recycling and extended producer responsibility (3, 6%); Functions of packaging (2, 4%); Labelling and nutrition labelling (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Modified atmosphere, vacuum and shrink packaging (3 hard of 6), Migration and food-contact safety (2 hard of 4), Pouch, bottle and carton filling of milk (2 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Active and intelligent packaging (1 easy of 5).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Dairy Packaging

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.