LAISHA
Open Laisha

ICAR AICE-JRF/SRF Milk Composition & Physical Properties: practice questions

ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
50written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Milk Composition & Physical Properties in ICAR AICE-JRF/SRF

Milk constituents and their distribution between phases, species differences, colostrum, and the physical properties of milk with their causes: freezing point and its constancy, buffering and the role of colloidal calcium phosphate, redox potential, viscosity and surface tension. Expect reasoning questions on why a property changes in mastitic, late-lactation, watered or soured milk.

What milk is made of, how composition varies, and the physical properties used to test and process it.

Our 50 ICAR AICE-JRF/SRF questions in this subject: 7 easy, 26 medium, 17 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · easy

In typical cow milk, casein makes up roughly what share of total protein?

  1. About 50 per cent
  2. About 20 per cent
  3. About 80 per cent
  4. About 95 per cent
Answer and working

C. About 80 per cent

Casein is about 80% of cow milk protein (about 2.6% of milk) and whey proteins about 20%. 20% is the whey share; 50% is closer to human milk, which is whey-dominant.

Question 2 · hard

Camel milk coagulates poorly with calf rennet. Which feature of its proteins is the main reason?

  1. An unusually high content of colloidal calcium phosphate
  2. A high proportion of beta-lactoglobulin that coats the micelles
  3. Little kappa-casein and larger micelles
  4. An absence of beta-casein, the main substrate of chymosin
Answer and working

C. Little kappa-casein and larger micelles

Camel milk has little kappa-casein (the chymosin substrate whose cleavage starts coagulation) and large micelles, and bovine chymosin acts slowly on camel kappa-casein. It has no beta-lactoglobulin at all, and beta-casein is its major casein.

Question 3 · medium

At which stage of lactation are the fat and protein contents of cow milk usually lowest?

  1. Around peak yield, roughly the second month
  2. At exactly the midpoint of a 305-day lactation
  3. In the last month before drying off
  4. Usually in the first three days after calving
Answer and working

A. Around peak yield, roughly the second month

After colostrum, fat and protein fall to their lowest near peak yield (about month 2), then rise as yield declines, so late-lactation milk is richer. The first days after calving give colostrum, the richest secretion.

Question 4 · medium

A farm uses a hydrometer-type colostrometer to check colostrum. What property does it actually measure?

  1. Electrical conductivity, which rises in direct proportion to the immunoglobulin content
  2. Refractive index, which falls as immunoglobulin content rises
  3. Specific gravity, which rises with immunoglobulin and total solids content
  4. Viscosity, read from the time taken to drain a fixed volume
Answer and working

C. Specific gravity, which rises with immunoglobulin and total solids content

A colostrometer is a hydrometer reading specific gravity, which correlates with immunoglobulin content. A Brix refractometer, the other farm tool, reads refractive index, which rises (not falls) with solids.

Question 5 · medium

The surface tension of milk at 20 degrees Celsius is about:

  1. 45 to 52 millinewtons per metre
  2. 72 to 73 millinewtons per metre
  3. 20 to 25 millinewtons per metre
  4. 90 to 100 millinewtons per metre
Answer and working

A. 45 to 52 millinewtons per metre

Proteins, phospholipids and fatty acids adsorb at the surface and lower milk's surface tension to about 45-52 mN/m; water is about 72-73.

Question 6 · easy

The specific heat of whole milk is about:

  1. 1.0 kilojoule per kilogram per kelvin
  2. 3.9 kilojoules per kilogram per kelvin
  3. 2.1 kilojoules per kilogram per kelvin
  4. 4.18 kilojoules per kilogram per kelvin
Answer and working

B. 3.9 kilojoules per kilogram per kelvin

Whole milk is about 3.9 kJ/kg K, slightly below water (4.18) because solids, especially fat, have lower specific heat.

Question 7 · hard

How does heat treatment affect the redox potential of milk?

  1. It lowers Eh by exposing sulfhydryl groups of denatured whey proteins and expelling oxygen
  2. It raises Eh by oxidising lactose into lactobionic acid and dissolving extra oxygen from the air
  3. It has no effect, because redox potential is fixed by pH alone
  4. It raises Eh because heating dissolves more oxygen in the milk
Answer and working

A. It lowers Eh by exposing sulfhydryl groups of denatured whey proteins and expelling oxygen

Denatured beta-lactoglobulin exposes -SH groups and heating drives off oxygen, giving a reducing environment that protects heated products from oxidised flavour. Hot liquids hold less oxygen, not more.

Question 8 · medium

Why is a low redox potential important inside a ripening cheese?

  1. It prevents any microbial growth, so ripening is purely enzymatic
  2. It raises the pH of the cheese to above 7.0
  3. It keeps lactose from being fermented during ripening
  4. It favours the anaerobic and facultative organisms and reactions of ripening
Answer and working

D. It favours the anaerobic and facultative organisms and reactions of ripening

Cheese interiors have a negative Eh, which suits facultative and anaerobic starter and non-starter bacteria and influences flavour chemistry; it does not stop microbial growth.

Question 9 · medium

A Brix refractometer is used on a farm to judge colostrum quality. Why does it work?

  1. Refractive index rises with total solids, which correlate with immunoglobulin content
  2. Brix reading measures conductivity, which rises with immunoglobulins
  3. Refractive index falls as fat rises, and fat correlates with immunoglobulins
  4. Brix reading measures lactose, which is highest in the best colostrum
Answer and working

A. Refractive index rises with total solids, which correlate with immunoglobulin content

The Brix reading rises with dissolved solids; in colostrum these are dominated by immunoglobulins. Lactose is low in colostrum.

Question 10 · easy

Camel milk is notably richer than cow milk in which vitamin?

  1. Vitamin D
  2. Vitamin B12
  3. Vitamin A
  4. Vitamin C
Answer and working

D. Vitamin C

Camel milk contains several times more vitamin C than cow milk, important in arid diets.

A study plan for Milk Composition & Physical Properties in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (42% of the 50 questions): Species differences: cow, buffalo, goat, sheep, camel, human (6, 12%); Buffer capacity and acid-base equilibria (5, 10%); Electrical conductivity, refractive index and thermal properties (5, 10%); Gross composition of milk and its normal ranges (5, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Variation with breed, feed, season, lactation stage and mastitis (5, 10%); Viscosity, surface tension and interfacial tension (5, 10%); Acidity and pH; titratable acidity (4, 8%); Colour and optical properties of milk (4, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Oxidation-reduction potential (4, 8%); Colostrum and abnormal milks (3, 6%); Density and specific gravity; lactometer readings (2, 4%); Freezing point and its use in detecting added water (2, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Variation with breed, feed, season, lactation stage and mastitis (3 hard of 5), Oxidation-reduction potential (2 hard of 4), Density and specific gravity; lactometer readings (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Colostrum and abnormal milks (2 easy of 3); Colour and optical properties of milk (1 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Milk Composition & Physical Properties

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.