ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
60written to this exam in this subject
12syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Additives & Ingredient Technology in ICAR AIEEA-PG / PGS
Unit I food additives: definitions, INS/E numbers, classes and examples, ADI, natural and synthetic colours, sweeteners, preservatives and antioxidants.
What each class of additive and ingredient does, how it is chosen and dosed, and how its safety is assessed and regulated: preservatives, antioxidants, emulsifiers, hydrocolloids, colours, sweeteners, flavour enhancers and processing aids.
Our 60 ICAR AIEEA-PG / PGS questions in this subject: 25 easy, 25 medium, 10 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · easy
Additives numbered in the 200s in the INS/E system are mainly:
Emulsifiers and thickeners
Sweeteners
Colours
Preservatives
Answer and working
D. Preservatives
100s colours, 200s preservatives, 400s thickeners and emulsifiers.
Question 2 · medium
Nitrite is added to cured meats mainly to:
Add sweetness to the meat
Lower the pH of the meat
Increase water-holding capacity
Control C. botulinum and fix colour
Answer and working
D. Control C. botulinum and fix colour
It forms nitrosomyoglobin.
Question 3 · medium
Ascorbate or erythorbate is added with nitrite in cured meats to:
Lower the salt content
Reduce nitrosamine formation
Increase nitrite toxicity
Replace nitrite completely
Answer and working
B. Reduce nitrosamine formation
It also speeds colour formation.
Question 4 · medium
Citric acid improves the action of phenolic antioxidants mainly by:
Chelating pro-oxidant metal ions
Absorbing oxygen from the headspace
Lowering the oil's melting point
Donating hydrogen atoms to radicals
Answer and working
A. Chelating pro-oxidant metal ions
It is a synergist rather than a primary antioxidant.
Question 5 · medium
PGPR (INS 476) is used in chocolate to:
Prevent bloom completely
Sweeten without sugar
Increase the melting point
Reduce yield value
Answer and working
D. Reduce yield value
Lecithin reduces plastic viscosity.
Question 6 · hard
Which hydrocolloid at very low levels stabilises chocolate milk through interaction with casein?
High-methoxyl pectin
Gum arabic
Methylcellulose
κ-Carrageenan
Answer and working
D. κ-Carrageenan
It forms a weak network with casein micelles.
Question 7 · easy
Phosphoric acid is characteristic of:
Grape jellies
Yoghurt
Cola drinks
Pickles
Answer and working
C. Cola drinks
It gives sharp acidity.
Question 8 · medium
Monocalcium phosphate in baking powder is:
A slow, heat-activated acid
A fast-acting leavening acid
The gas source
A starch filler
Answer and working
B. A fast-acting leavening acid
Sodium bicarbonate is the gas source.
Question 9 · medium
Olestra is:
A non-absorbed sucrose polyester
A protein-based fat replacer
A soluble fibre
A polyol sweetener
Answer and working
A. A non-absorbed sucrose polyester
Approved in the US in 1996 for snacks.
Question 10 · hard
Why are carbohydrate-based fat replacers unsuitable for frying?
They cannot fry
They are not permitted in snacks
They add too much fat
They are too expensive
Answer and working
A. They cannot fry
They work by binding water.
A study plan for Food Additives & Ingredient Technology in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (43% of the 60 questions): Preservatives: benzoates, sorbates, sulphites, nitrites and natural antimicrobials (9, 15%); Food colours: synthetic and natural (6, 10%); Hydrocolloids: starches, gums, pectins, carrageenan, alginates and gelatin (6, 10%); Definitions, classification and the INS/E-number system (5, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Emulsifiers and stabilisers (5, 8%); Flavour enhancers and acidulants (5, 8%); Sweeteners: nutritive and non-nutritive (5, 8%); Antioxidants: synthetic and natural (4, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Fat replacers and sugar replacers (4, 7%); Leavening agents, enzymes and processing aids (4, 7%); Safety evaluation: JECFA, ADI and good manufacturing practice (4, 7%); Clean-label reformulation (3, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Emulsifiers and stabilisers (2 hard of 5), Preservatives: benzoates, sorbates, sulphites, nitrites and natural antimicrobials (3 hard of 9), Hydrocolloids: starches, gums, pectins, carrageenan, alginates and gelatin (2 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Definitions, classification and the INS/E-number system (3 easy of 5); Food colours: synthetic and natural (3 easy of 6).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.