ICAR AIEEA-PG / PGS Fats & Oils Technology: practice questions
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
61written to this exam in this subject
13syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Fats & Oils Technology in ICAR AIEEA-PG / PGS
Unit III technology of fats and oils: extraction, refining, hydrogenation, vanaspati, margarine, quality constants and adulteration tests.
From oilseed to finished fat: mechanical expression and solvent extraction, refining, bleaching and deodorisation, fat modification by hydrogenation, interesterification and fractionation, and the fat products — margarine, shortening, vanaspati and specialty fats — made from them.
Our 61 ICAR AIEEA-PG / PGS questions in this subject: 24 easy, 25 medium, 12 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · easy
Which is the most produced vegetable oil in the world?
Soybean oil
Olive oil
Palm oil
Groundnut oil
Answer and working
C. Palm oil
Soybean oil is second.
Question 2 · medium
Sesame oil is unusually stable to oxidation because of:
Added synthetic antioxidants
High saturated fat
Absence of linoleic acid
Sesamol and sesamin
Answer and working
D. Sesamol and sesamin
Natural lignan antioxidants.
Question 3 · easy
The catalyst most used for edible oil hydrogenation is:
Platinum
Lipase
Sodium methoxide
Nickel
Answer and working
D. Nickel
Sodium methoxide is for interesterification.
Question 4 · medium
A zero-trans margarine base can be made by interesterifying:
Two liquid oils with nickel
Fully hydrogenated hard stock with liquid oil
Partially hydrogenated oil with water
Liquid oil with free fatty acids
Answer and working
B. Fully hydrogenated hard stock with liquid oil
No partial hydrogenation is needed.
Question 5 · hard
Cocoa butter equivalents are:
Hydrogenated fish oils
Emulsifiers for chocolate
Compatible non-lauric fats
Lauric fats incompatible with cocoa butter
Answer and working
C. Compatible non-lauric fats
Made from palm mid fraction, shea, illipe and others.
Question 6 · easy
FSSAI requires frying oil to be discarded when total polar compounds exceed:
10%
25%
5%
50%
Answer and working
B. 25%
Many countries use about 24–27%.
Question 7 · medium
Polymerisation of frying oil leads to:
Lower viscosity
Higher viscosity and foaming
Higher smoke point
Clearer, paler oil
Answer and working
B. Higher viscosity and foaming
Also gum deposits on fryers.
Question 8 · medium
Which practice extends frying oil life?
Filtering food particles regularly
Using copper fryer parts
Salting food over the fryer
Keeping oil at maximum heat while idle
Answer and working
A. Filtering food particles regularly
Particles burn and catalyse degradation.
Question 9 · easy
Acid oil is produced by acidulating:
Deodoriser distillate
Lecithin
Soapstock
Spent catalyst
Answer and working
C. Soapstock
Sulphuric acid splits the soaps.
Question 10 · medium
Spent bleaching earth must be handled carefully because it:
Releases hydrogen gas
Contains aflatoxin
Is radioactive
Retained oil self-heats
Answer and working
D. Retained oil self-heats
It holds about 20–40% oil.
A study plan for Fats & Oils Technology in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (48% of the 61 questions): Oil quality tests: acid value, peroxide value, iodine value and saponification value (7, 11%); Margarine, shortening and vanaspati (6, 10%); Neutralisation, bleaching and deodorisation; physical refining (6, 10%); Degumming and lecithin recovery (5, 8%); Hydrogenation and trans fatty acids (5, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Sources and composition of edible oils and fats (5, 8%); Fractionation (4, 7%); Frying oil deterioration and management (4, 7%); Interesterification: chemical and enzymatic (4, 7%); Mechanical expression and expellers (4, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Solvent extraction and desolventising (4, 7%); Specialty fats and cocoa butter equivalents (4, 7%); By-products of oil refining (3, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Oil quality tests: acid value, peroxide value, iodine value and saponification value (3 hard of 7), Degumming and lecithin recovery (2 hard of 5), Margarine, shortening and vanaspati (2 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Specialty fats and cocoa butter equivalents (3 easy of 4); Hydrogenation and trans fatty acids (3 easy of 5).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.