ICAR AIEEA-PG — Agricultural Engineering & Technology (Major Subject Group 10) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papersICAR AIEEA-PG — Agricultural Engineering & Technology (Major Subject Group 10) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 120 minutes, 120 MCQs, +4 / −1, English only (2026 bulletin). One paper for the whole subject group.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Definition-level MCQs and one-step calculations: layout types and SLP codes, location factors, contents of a feasibility report, break-even and payback, HACCP principles, FSSAI and Codex basics, quality attributes and their instruments.
Measuring and assuring food quality, the food-safety systems regulators expect, and laying out a processing plant.
Our 43 ICAR AIEEA-PG questions in this subject: 33 easy, 8 medium, 2 hard, across 10 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
A food in equilibrium with air at 85 % relative humidity at the same temperature has a water activity of
D. 0.85
Water activity is equilibrium relative humidity divided by 100, so 85 % ERH gives aw = 0.85. 0.15 is 1 − 0.85 and 1.18 is the reciprocal; neither has meaning here.
How many steps does the Codex logic sequence for applying HACCP contain, including the five preliminary steps?
A. 12
Five preliminary steps plus seven principles make twelve. Seven is the number of principles only. 5 counts only the preliminary steps, and 14 has no basis in the Codex sequence.
Why must a food-contact surface be cleaned before it is sanitised?
B. Soil shields microbes and inactivates many sanitisers
Organic soil protects microorganisms and reacts with sanitisers such as chlorine, so sanitising a dirty surface achieves little. The other reasons are false.
Which detergent type is chosen to remove mineral scale such as milkstone from heated surfaces?
C. Acid detergent
Acid detergents dissolve mineral deposits; alkaline detergents remove fat and protein. A quaternary ammonium compound is a sanitiser, not a detergent.
Which stainless steel grade is preferred over AISI 304 for equipment handling salty brines and acidic products?
D. AISI 316
316 contains molybdenum and resists chloride pitting and acids better than 304. 410 and 430 are martensitic and ferritic grades with lower corrosion resistance; painted mild steel is not acceptable on product contact.
A tomato paste plant is best located near the growing area mainly because
C. Raw tomatoes are perishable and lose much weight in processing
Perishable, weight-losing raw materials pull plants towards the source. Paste is shelf-stable and lighter than the fruit, so it is cheaper to ship the product.
In Muther's systematic layout planning, the closeness rating 'X' on an activity relationship chart means
A. Closeness is undesirable
The codes are A absolutely necessary, E especially important, I important, O ordinary, U unimportant and X undesirable. In a food plant, the effluent plant and a high-care packing room would be rated X.
A process (functional) layout, compared with a product layout, gives
B. Greater flexibility but more material handling
Grouping similar machines lets many products share them (flexibility) at the cost of longer, more complex flow and more handling and WIP.
A pump delivers 10 m³/h of water against a total head of 25 m at 60 % efficiency. The shaft power required is
A. 1.14 kW
P = ρgQH/η = 1000 × 9.81 × (10/3600) × 25/0.6 = 1135 W = 1.14 kW. 0.68 kW is the hydraulic power (efficiency not applied); multiplying by 0.6 instead of dividing gives 0.41 kW. 1.89 kW divides by the efficiency twice (0.681/0.6²).
BOD5 of a wastewater is measured by incubating the sample for
B. 5 days at 20 °C
Standard BOD5 is 5 days at 20 °C. The 2-hour, 150 °C digestion is the COD test.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.