LAISHA
Open Laisha

ICAR AICE-JRF/SRF Food Quality, Safety & Process Plant Design: practice questions

ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
96written to this exam in this subject
11syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. LAN-based computer test, 2 hours, 120 MCQs: 20 Part A (general knowledge and reasoning), 50 Part B (core group), 50 Part C (specialisation); four options.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Quality, Safety & Process Plant Design in ICAR AICE-JRF/SRF

PG-depth questions on quality evaluation and SQC (control-chart constants, OC curves, ICMSF plans), HACCP terminology and the Codex principles, ISO 22000 and OPRPs, hygienic design rules, plant location and layout methods, feasibility indicators (NPV, IRR, break-even, DSCR) and effluent treatment and by-product utilisation.

Measuring and assuring food quality, the food-safety systems regulators expect, and laying out a processing plant.

Our 96 ICAR AICE-JRF/SRF questions in this subject: 9 easy, 54 medium, 33 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · hard

During a shift the chart recorder shows the pasteuriser holding temperature fell below the critical limit for 20 minutes without flow diversion. The correct corrective action includes

  1. Restoring control, holding product made in that period and deciding its disposition
  2. Raising the temperature for the next batch and releasing the affected product as normal
  3. Recording the event and waiting for routine weekly verification to assess its significance
  4. Adjusting the recorder chart so that the record matches the validated critical limit
Answer and working

A. Restoring control, holding product made in that period and deciding its disposition

Corrective action has two parts: bring the process back under control and deal with the product produced during the deviation (hold, evaluate, reprocess or destroy), with records. Releasing it, waiting for weekly review or altering records are failures.

Question 2 · medium

An ATP bioluminescence swab of a slicer after cleaning gives a high reading. The correct interpretation is

  1. Organic residue remains and the surface needs re-cleaning
  2. The swab measured total viable count in colony units
  3. The sanitiser concentration was too high and must be cut
  4. The surface carries a pathogen and the line must be closed
Answer and working

A. Organic residue remains and the surface needs re-cleaning

ATP swabs detect organic residue, from food or microbes, within minutes; they are a cleanliness indicator, not a count or identification of pathogens.

Question 3 · hard

A worker in a salad plant reports diarrhoea and vomiting. Under GMP, the supervisor should

  1. Allow work in high-care if gloves and a mask are worn
  2. Exclude the worker from food handling until medically cleared
  3. Allow work after the worker washes hands with a sanitiser
  4. Move the worker to the raw-vegetable washing area for the shift
Answer and working

B. Exclude the worker from food handling until medically cleared

Food handlers with symptoms of gastrointestinal illness must be excluded from food-handling areas until fit. Gloves, sanitiser or moving to raw areas do not remove the risk of transmitting pathogens.

Question 4 · medium

Which expert body provides risk assessments of food additives and contaminants to Codex?

  1. IPPC
  2. JMPR
  3. EFSA
  4. JECFA
Answer and working

D. JECFA

JECFA (Joint FAO/WHO Expert Committee on Food Additives) covers additives, contaminants and veterinary drug residues; JMPR covers pesticide residues; EFSA is the EU agency; IPPC is the plant-protection convention.

Question 5 · hard

Why do flour mills often remain multi-storey when most new food plants are single-storey?

  1. Gravity flow between milling stages saves conveying
  2. Flour is too light to be moved on belt conveyors
  3. Single-storey buildings are prohibited for dust handling
  4. Upper floors keep the flour cool by natural draught
Answer and working

A. Gravity flow between milling stages saves conveying

Grain and stock are lifted once and then flow down through the milling and sifting stages by gravity, saving conveying energy and space. The other reasons are not true.

Question 6 · medium

A line needs 3000 kg/h of sorting. Each sorter is rated 450 kg/h and achieves 85 % efficiency in practice. How many sorters are required?

  1. 10
  2. 6
  3. 7
  4. 8
Answer and working

D. 8

Effective capacity = 450 × 0.85 = 382.5 kg/h; 3000/382.5 = 7.84, rounded up to 8. Ignoring efficiency gives 6.67 → 7 (and 6 if rounded down). 10 applies the efficiency twice (3000/(450 × 0.85²) = 9.2, rounded up).

Question 7 · medium

A food plant has annual fixed costs of 1.2 million, a selling price of 60 per unit and variable cost of 36 per unit. Installed capacity is 80000 units per year. The break-even point is

  1. 50000 units, 37.5 % of capacity
  2. 33333 units, 41.7 % of capacity
  3. 50000 units, 62.5 % of capacity
  4. 20000 units, 25.0 % of capacity
Answer and working

C. 50000 units, 62.5 % of capacity

BEP = 1200000/(60 − 36) = 50000 units = 50000/80000 = 62.5 %. Dividing by the price alone gives 20000; dividing by the variable cost gives 33333; 37.5 % is the margin of safety, not the break-even utilisation.

Question 8 · hard

A food project's net profit after tax is 30, depreciation 10, interest 15, and the year's principal repayment 25 (all in lakh). The debt service coverage ratio is

  1. 0.75
  2. 1.00
  3. 1.38
  4. 0.73
Answer and working

C. 1.38

DSCR = (PAT + depreciation + interest)/(principal + interest) = (30 + 10 + 15)/(25 + 15) = 55/40 = 1.375. Using PAT alone over principal + interest gives 0.75; the reciprocal of the correct ratio is 0.73; 1.00 omits interest from the numerator.

Question 9 · easy

A plant uses 4 m³ of water per tonne of product and produces 20 t/day. Storage for two days of supply interruption requires

  1. 8 m³
  2. 160 m³
  3. 40 m³
  4. 80 m³
Answer and working

B. 160 m³

Daily demand = 4 × 20 = 80 m³; two days = 160 m³. 80 m³ covers one day only. 8 m³ forgets the production rate (4 × 2).

Question 10 · medium

Dissolved-air flotation is used in food effluent treatment chiefly to remove

  1. Fat, oil, grease and fine suspended solids
  2. Pathogens before final discharge
  3. Nitrates produced during nitrification
  4. Dissolved sugars, starch and soluble proteins in the water
Answer and working

A. Fat, oil, grease and fine suspended solids

Fine air bubbles float fat, oil and grease and light suspended solids to the surface for skimming. Dissolved organics need biological treatment; pathogens need disinfection.

A study plan for Food Quality, Safety & Process Plant Design in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (46% of the 96 questions): Quality attributes and their measurement (15, 16%); Equipment sizing (10, 10%); HACCP (10, 10%); Hygienic design of equipment (9, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Waste and by-product utilisation (9, 9%); Feasibility reports (8, 8%); FSMA and HARPC concepts (8, 8%); Food law: FSSAI, FDA and Codex (7, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Plant location and layout (7, 7%); Process flow sheets (7, 7%); GMP and hygiene (6, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Feasibility reports (4 hard of 8), FSMA and HARPC concepts (4 hard of 8), Plant location and layout (3 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: FSMA and HARPC concepts (2 easy of 8); Waste and by-product utilisation (2 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Food Quality, Safety & Process Plant Design

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.