LAISHA
Open Laisha

ICAR AICE-JRF/SRF Human Engineering, Ergonomics & Safety: practice questions

ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
61written to this exam in this subject
9syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. LAN-based computer test, 2 hours, 120 MCQs: 20 Part A (general knowledge and reasoning), 50 Part B (core group), 50 Part C (specialisation); four options.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Human Engineering, Ergonomics & Safety in ICAR AICE-JRF/SRF

Ergonomics and safety at PG depth: design of controls and seats from anthropometric data, workload assessment and acceptable workload as a share of VO2max, TCCW and PCW, rest allowance, posture analysis methods, ISO 2631 whole-body vibration assessment, noise exposure standards, accident causation models and ROPS test principles.

Designing machines around the people who use them, and measuring the noise, vibration and work load they face.

Our 61 ICAR AICE-JRF/SRF questions in this subject: 5 easy, 36 medium, 20 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · hard

Index finger thickness of the smallest user group has mean 16.0 mm and SD 1.5 mm. A guard slot must keep out the fingers of 99% of this population. The slot width must be less than about

  1. 12.5 mm
  2. 16.0 mm
  3. 19.5 mm
  4. 13.5 mm
Answer and working

A. 12.5 mm

To exclude 99% of fingers the opening must be smaller than the 1st percentile: 16.0 − 2.326 × 1.5 = 12.51 mm. The 99th percentile (19.5 mm) would let almost every finger in; the 5th percentile (13.5 mm) excludes only 95%; the mean lets half in. In practice guard openings follow the safety-distance standard, which is built on this logic.

Question 2 · medium

Using the regression EE (kJ/min) = 0.159 × HR − 8.72, the energy expenditure of a woman worker whose average working heart rate is 130 beats/min is

  1. 2.85 kJ/min
  2. 20.67 kJ/min
  3. 11.95 kJ/min
  4. 29.39 kJ/min
Answer and working

C. 11.95 kJ/min

EE = 0.159 × 130 − 8.72 = 20.67 − 8.72 = 11.95 kJ/min. Omitting the constant gives 20.67; adding it gives 29.39; 2.85 is the kcal/min value mislabelled as kJ/min.

Question 3 · hard

Resting heart rate is 72 beats/min. During a 30-minute trial the mean working heart rate is 118 beats/min, and the recovery beats above resting after work total 180. The physiological cost of work (PCW = TCCW / working time) is

  1. 118 beats/min
  2. 52 beats/min
  3. 1560 beats/min
  4. 46 beats/min
Answer and working

B. 52 beats/min

CCW = (118 − 72) × 30 = 1380 beats; TCCW = CCW + CCR = 1380 + 180 = 1560 beats; PCW = 1560/30 = 52 beats/min. ΔHR (46) ignores recovery; 118 is the raw working heart rate; 1560 is TCCW, not per minute.

Question 4 · hard

A pedal-operated thresher is driven with a mechanical power output of 60 W while the operator's energy expenditure is 21 kJ/min. The gross mechanical efficiency is about

  1. 17.1%
  2. 28.6%
  3. 4.8%
  4. 2.9%
Answer and working

A. 17.1%

21 kJ/min = 21 000/60 = 350 W; η = 60/350 = 17.1%. 28.6% divides 60 W by 210 instead of 350 (a slip in converting kJ/min to W); 2.9% is 60/21 = 2.86 with the units ignored; 4.8% divides 60 by 21 × 60 = 1260, multiplying by 60 instead of dividing. A value near 17% is plausible for pedalling.

Question 5 · medium

Sustained static muscle contraction is fatiguing mainly because

  1. it uses more whole-body oxygen than dynamic work of equal force and duration
  2. it lowers heart rate below resting
  3. it increases the respiratory quotient above 1
  4. the contracted muscle compresses its blood vessels and restricts blood flow
Answer and working

D. the contracted muscle compresses its blood vessels and restricts blood flow

Static effort above about 15–20% of maximum restricts circulation, so metabolites accumulate and fatigue develops quickly even though whole-body oxygen uptake is modest.

Question 6 · medium

A seat must isolate (transmit less than the input of) vibration at 5 Hz. Its natural frequency must be below about

  1. 7.07 Hz
  2. 2.50 Hz
  3. 3.54 Hz
  4. 5.00 Hz
Answer and working

C. 3.54 Hz

Isolation needs r = f/fn > √2, so fn < 5/√2 = 3.54 Hz. 5 Hz would be resonance; 7.07 Hz inverts the ratio; 2.5 Hz is sufficient but is not the limit.

Question 7 · hard

A brush-cutter handle has frequency-weighted rms accelerations of 3, 2 and 4 m/s² in the three axes. The operator uses it for 2 hours a day. The daily hand-arm exposure A(8) is about

  1. 5.39 m/s²
  2. 1.35 m/s²
  3. 4.50 m/s²
  4. 2.69 m/s²
Answer and working

D. 2.69 m/s²

ahv = √(3² + 2² + 4²) = 5.385 m/s²; A(8) = 5.385 × √(2/8) = 2.69 m/s², above the EU action value of 2.5 m/s² but below the 5 m/s² limit. 5.39 ignores duration; 1.35 scales linearly; 4.50 adds the axes arithmetically.

Question 8 · medium

In a seat test, the frequency-weighted acceleration is 0.45 m/s² on the seat and 0.60 m/s² on the floor below it. The SEAT value is

  1. 133%, so the seat amplifies vibration
  2. 75%, so the seat amplifies vibration
  3. 25%, so the seat amplifies vibration
  4. 75%, so the seat attenuates vibration
Answer and working

D. 75%, so the seat attenuates vibration

SEAT = seat/floor × 100 = 0.45/0.60 × 100 = 75%. Below 100% means attenuation. 133% inverts the ratio; 25% is the reduction, not the SEAT value.

Question 9 · medium

A seat with stiffness 40000 N/m, effective mass 90 kg and damping coefficient 760 N·s/m has a damping ratio of about

  1. 0.40
  2. 0.20
  3. 0.28
  4. 0.10
Answer and working

B. 0.20

cc = 2√(km) = 2√(40000 × 90) = 3795 N·s/m; ζ = c/cc = 760/3795 = 0.200. Forgetting the factor 2 gives 0.40; the other options are formula slips. Putting the 2 inside the root, √(2km) = 2683, gives 0.28, and using 4√(km) gives 0.10.

Question 10 · medium

A woman worker's VO2max is 1.8 L/min. Oxygen uptake is 0.75 L/min when weeding with a traditional tool and 0.62 L/min with a wheel hoe. Taking 35% of VO2max as the acceptable limit,

  1. the traditional tool (41.7%) is within the limit and the wheel hoe (34.4%) is not
  2. neither is within the limit
  3. the wheel hoe (34.4%) is within the limit and the traditional tool (41.7%) is not
  4. both are within the limit (34.4% and 41.7%)
Answer and working

C. the wheel hoe (34.4%) is within the limit and the traditional tool (41.7%) is not

0.62/1.8 = 34.4% (< 35%) and 0.75/1.8 = 41.7% (> 35%). Only the wheel hoe can be sustained over a full day.

A study plan for Human Engineering, Ergonomics & Safety in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (57% of the 61 questions): Vibration: transmissibility and damping (14, 23%); Work physiology: energy expenditure, heart rate and oxygen uptake (14, 23%); Anthropometry (7, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Dust and thermal stress (7, 11%); Design of controls and seats (5, 8%); Tools designed for women workers (5, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Farm accidents and their causes (3, 5%); Noise: decibels and exposure (3, 5%); Safety standards and ROPS (3, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Farm accidents and their causes (2 hard of 3), Anthropometry (3 hard of 7), Tools designed for women workers (2 hard of 5).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Dust and thermal stress (2 easy of 7); Work physiology: energy expenditure, heart rate and oxygen uptake (2 easy of 14).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Human Engineering, Ergonomics & Safety

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.