ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India.
Format
LAN-based computer test, 2 hours, 120 MCQs: 20 Part A (general knowledge and reasoning), 50 Part B (core group), 50 Part C (specialisation); four options.
Sections
38 Dairy Engineering (under group 9)
39 Farm Machinery and Power Engineering
40 Soil and Water Conservation Engineering
41 Processing and Food Engineering
42 Renewable Energy Engineering
43 Irrigation and Drainage Engineering
How it has changed
PhD admission and JRF/SRF fellowship. Each specialisation syllabus has 7–10 units at PG depth (e.g. FMPE: design of tillage and planting machinery, testing, tractor design, ergonomics, soil dynamics, manufacturing, instrumentation, energy in agriculture). Question papers are not published. 2026 bulletin: https://cdnbbsr.s3waas.gov.in/s388a839f2f6f1427879fc33ee4acf4f66/uploads/2026/05/20260508269763347.pdf
How to prepare for ICAR AICE-JRF/SRF
Where our 2177 questions for it fall
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Heaviest (52% of the questions): Remote Sensing, GIS & GNSS for Land & Water (119); Water Resources Management, Floods & Canal Systems (106); Food Quality, Safety & Process Plant Design (96); Bio-energy Systems: Design & Applications (90); Soil Science for Engineers (83); Agricultural Drones, Robotics & Automation (83); Heat & Mass Transfer (71); Precision Agriculture & System Management (71); Protected Cultivation & Greenhouse Engineering (71); Instrumentation, Sensors & Process Control (69); Storage Engineering, Material Handling & Packaging (69); Renewable Energy Sources (Solar, Wind) (68); and 2 more.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
Middle band: Human Engineering, Ergonomics & Safety (61); Agricultural Drainage Engineering (59); Food & Dairy Engineering (59); Engineering Properties of Agricultural Produce (57); Watershed Planning & Management (56); Tractor Systems & Controls (55); Post-Harvest Engineering of Horticultural Crops (55); Mechanics of Tillage & Traction (Soil Dynamics) (53); Farm Machinery Testing, Evaluation & Standards (52); Machine Design (43); Hydraulic Drives & Controls (43); Soil & Water Conservation Engineering (43); and 2 more.
One pass per subject, then mixed sets across them.
Lighter: Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (36); Workshop Technology & Manufacturing (33); Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (31); Refrigeration, Air-Conditioning & Cold-Chain Engineering (31); Sprinkler & Micro-Irrigation Systems (29); Farm Power Sources (25); Tractor & Automotive Engines (IC Engines) (25); Farm Machinery Management & Economics (25); Groundwater, Wells & Pumps (25); Watershed Hydrology (24); Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser (23); Theory of Machines (16); and 2 more.
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Hardest share: Theory of Machines (16 hard of 16), Engineering Thermodynamics (5 hard of 6), Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser (18 hard of 23).
Leave untimed time for these and read every explanation, including for the options you rejected.
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. In the Wind Erosion Equation E = f(I, K, C, L, V), the factor L represents:
the unsheltered distance across the field along the prevailing erosive wind
the lime content of the soil
the height of the nearest windbreak or shelterbelt on the upwind edge of the field
the length of the growing season
Answer and working
A. the unsheltered distance across the field along the prevailing erosive wind
I is soil erodibility, K ridge roughness, C the climatic factor, L the unsheltered field length along the wind direction and V vegetative cover. Windbreaks and strip cropping act by reducing L.
Soil & Water Conservation Engineering · Wind erosion mechanics
2. An inverted U-tube manometer with oil of relative density 0.8 in its upper bend is connected between two points on a water pipeline. The oil-water interfaces differ in level by 200 mm. What is the difference in piezometric head between the two points, in metres of water?
0.200 m
0.360 m
0.0400 m
0.160 m
Answer and working
C. 0.0400 m
For a lighter manometric liquid, h = x(1 − S_light/S) = 0.2 × (1 − 0.8) = 0.0400 m of water. Using x × S_light gives 0.160 m; the inverted manometer is chosen precisely because it gives a large deflection for a small head difference. 0.360 m uses (1 + 0.8) instead of (1 − 0.8).
Fluid Mechanics & Open Channel Hydraulics · Hydrostatics and manometry
3. A canopy has NIR reflectance 0.50 and red reflectance 0.08. Its NDVI is about
0.72
0.42
6.25
0.84
Answer and working
A. 0.72
NDVI = (0.50 − 0.08)/(0.50 + 0.08) = 0.42/0.58 = 0.72. 0.42 forgets the denominator; 6.25 is the simple ratio NIR/red; 0.84 is 0.42/0.50.
Precision Agriculture & System Management · Proximal and remote sensing for crops
4. Activities and durations in days, with predecessors: A 4 (none), B 6 (none), C 5 (after A), D 3 (after A), E 4 (after B and D), F 2 (after C and E). What is the free float of activity B?
0 days
2 days
1 day
6 days
Answer and working
C. 1 day
Free float = earliest start of the successor − EF of the activity. B finishes at 6 at the earliest; its successor E cannot start before 7 because of D. Free float = 7 − 6 = 1 day, which here equals its total float. 2 days is C's float; 6 days is B's duration. 0 days assumes B lies on the critical path.
Engineering Economics, Project & Business Management · CPM and PERT
5. Using the regression EE (kJ/min) = 0.159 × HR − 8.72, the energy expenditure of a woman worker whose average working heart rate is 130 beats/min is
2.85 kJ/min
20.67 kJ/min
11.95 kJ/min
29.39 kJ/min
Answer and working
C. 11.95 kJ/min
EE = 0.159 × 130 − 8.72 = 20.67 − 8.72 = 11.95 kJ/min. Omitting the constant gives 20.67; adding it gives 29.39; 2.85 is the kcal/min value mislabelled as kJ/min.
Human Engineering, Ergonomics & Safety · Work physiology: energy expenditure, heart rate and oxygen uptake
6. Why do flour mills often remain multi-storey when most new food plants are single-storey?
Gravity flow between milling stages saves conveying
Flour is too light to be moved on belt conveyors
Single-storey buildings are prohibited for dust handling
Upper floors keep the flour cool by natural draught
Answer and working
A. Gravity flow between milling stages saves conveying
Grain and stock are lifted once and then flow down through the milling and sifting stages by gravity, saving conveying energy and space. The other reasons are not true.
Food Quality, Safety & Process Plant Design · Plant location and layout
7. A 30% shade net and a 50% shade net are used together, one above the other. What is the combined shade?
80%
35%
15%
65%
Answer and working
D. 65%
Transmissions multiply: (1 − 0.3) × (1 − 0.5) = 0.35, so shade = 1 − 0.35 = 65%. Adding the ratings gives 80%; 35% is the light that passes, not the shade; 15% multiplies the shade fractions.
8. In a three-point linkage, what is the virtual hitch point?
The drawbar pin
The point where the lower links attach to the tractor
The point where the lines of the upper and lower links, extended, intersect in side view
The centre of resistance of the implement
Answer and working
C. The point where the lines of the upper and lower links, extended, intersect in side view
The linkage acts as if the implement were hitched at the instantaneous centre where the extended link lines meet; its position determines how the implement's forces are transferred to the tractor.