LAISHA
Open Laisha

NCEES PE Agricultural and Biological Engineering Professional Practice, Ethics & Laws: practice questions

NCEES PE Agricultural and Biological Engineering · USA · NCEES (ASABE is the content partner)

Original practice questions written to the published syllabus · not past papers
10worked here, free
36written to this exam in this subject
5syllabus units

About NCEES PE Agricultural and Biological Engineering

NCEES PE Agricultural and Biological Engineering is a licensing and registration exam run by NCEES (ASABE is the content partner), for candidates in USA. Computer-based, 85 questions, 9.5-hour appointment (8.5 hours of exam). Once a year (next: 28 Oct 2026). Closed book with the electronic NCEES handbook and supplied searchable ASABE standards; SI and US customary units.

Source: ncees.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Professional Practice, Ethics & Laws in NCEES PE Agricultural and Biological Engineering

How the profession is regulated and what an engineer owes the public, the client and colleagues.

Our 36 NCEES PE Agricultural and Biological Engineering questions in this subject: 8 easy, 18 medium, 10 hard, across 5 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to NCEES PE Agricultural and Biological Engineering and are not shown on any other exam's page.

Question 1 · easy

What is the role of NCEES in engineering licensure in the United States?

  1. It issues national engineering licences that are valid in every state and territory
  2. It accredits university engineering programmes and sets their curricula
  3. It writes and scores the exams and a Model Law, while state boards issue licences
  4. It enforces the NSPE Code of Ethics by suspending members of the society
Answer and working

C. It writes and scores the exams and a Model Law, while state boards issue licences

Licensing is a state power. NCEES is a council of the state boards that develops and scores the FE and PE examinations and publishes the Model Law and Model Rules. ABET accredits programmes, and NSPE is a professional society, not a licensing body.

Question 2 · easy

What is the usual sequence to become a licensed Professional Engineer under the NCEES Model Law?

  1. FE exam, PE exam, accredited degree, then supervised experience
  2. Accredited degree, FE exam, supervised experience, then the PE exam
  3. Supervised experience, accredited degree, then the PE exam only
  4. Accredited degree, PE exam, then the FE exam after experience
Answer and working

B. Accredited degree, FE exam, supervised experience, then the PE exam

The Model Law path is an ABET-accredited degree, the Fundamentals of Engineering exam (engineer intern), typically four years of progressive experience, and the Principles and Practice of Engineering exam. States vary in details and alternative routes.

Question 3 · medium

What does the 'industrial exemption' in many US state licensing laws allow?

  1. Engineers in industry to seal public works drawings without passing the PE exam
  2. Factories to employ unlicensed engineers to certify buildings for occupancy
  3. Licensed engineers to skip continuing education while employed in industry
  4. Engineers employed by a manufacturer to design its products without a PE licence
Answer and working

D. Engineers employed by a manufacturer to design its products without a PE licence

Many states exempt employees designing their employer's manufactured products from licensure. It does not extend to offering services to the public or sealing plans submitted to public authorities, and it has nothing to do with continuing education.

Question 4 · medium

Under the NCEES Model Rules, if an engineer's judgement is overruled in a way that endangers life or property, the engineer shall:

  1. Comply with the decision, since the employer accepts the legal responsibility
  2. Notify the employer or client and such other authority as may be appropriate
  3. Resign, but say nothing to anyone in order to respect client confidentiality
  4. Notify only the professional society, which will decide what to do next
Answer and working

B. Notify the employer or client and such other authority as may be appropriate

The Model Rules echo the codes: when judgement is overruled under circumstances where life, health, property or welfare are endangered, licensees shall notify their employer or client and other appropriate authority. Silence or simple resignation does not meet the duty.

Question 5 · medium

Which ISO standard sets out general principles of risk assessment and risk reduction for the design of machinery?

  1. ISO 9001
  2. ISO 14001
  3. ISO 12100
  4. ISO 11684
Answer and working

C. ISO 12100

ISO 12100 gives the general principles of risk assessment and risk reduction for machinery. ISO 9001 is quality management, ISO 14001 environmental management, and ISO 11684 covers safety signs and hazard pictorials for agricultural machinery.

Question 6 · medium

Which US Clean Water Act programme issues permits for point-source discharges, including those from some concentrated animal feeding operations?

  1. The National Environmental Policy Act environmental review
  2. The National Pollutant Discharge Elimination System
  3. The Total Maximum Daily Load (TMDL) allocation
  4. The Occupational Safety and Health Act permits
Answer and working

B. The National Pollutant Discharge Elimination System

NPDES permits regulate point-source discharges to waters of the United States, including from CAFOs that meet the criteria. A TMDL sets the total load an impaired water can receive and allocates it among sources but is not itself a discharge permit.

Question 7 · easy

Which ISO technical committee develops standards for tractors and machinery for agriculture and forestry?

  1. ISO/TC 176
  2. ISO/TC 207
  3. ISO/TC 199
  4. ISO/TC 23
Answer and working

D. ISO/TC 23

ISO/TC 23 covers tractors and machinery for agriculture and forestry. TC 176 is quality management (ISO 9000 family), TC 207 environmental management (ISO 14000 family), and TC 199 safety of machinery.

Question 8 · medium

What does the '.7' in the designation ASAE D497.7 indicate?

  1. The part number of the document
  2. The revision of the document
  3. The year of publication, 2007
  4. The number of data tables it contains
Answer and working

B. The revision of the document

In ASABE designations, the number after the point is the revision. Citing the revision is necessary because content changes between revisions. ISO uses a colon and year, as in ISO 4254-1:2013, with a hyphen for the part.

Question 9 · hard

A contract specification states 'tractor safety to ISO 4254-1:2013'. A new edition of ISO 4254-1 is published during the contract. Which edition applies?

  1. The new edition, because a standard always applies in its latest form
  2. Whichever edition the supplier prefers, since both are valid standards
  3. The 2013 edition, because a dated reference applies only the edition cited
  4. Neither, because a superseded standard cannot be used in any contract
Answer and working

C. The 2013 edition, because a dated reference applies only the edition cited

A dated reference fixes the edition. An undated reference ('to ISO 4254-1') would apply the latest edition. Contracts should state which approach is intended, because editions can differ substantially.

Question 10 · hard

A standard cited in a 15-year-old pump-station specification has since been withdrawn and replaced. The specification is being reused for a new project. What should the engineer do?

  1. Keep the old citation, since a withdrawn standard remains valid for repeat designs
  2. Delete the citation and leave the requirement to the contractor's judgement
  3. Cite both standards and let the supplier choose the more convenient one
  4. Check the design against the replacement standard and update the specification
Answer and working

D. Check the design against the replacement standard and update the specification

Withdrawn or superseded standards may no longer reflect accepted practice. Reusing an old specification requires checking current standards and legal requirements and updating the document. Leaving requirements to the contractor or offering a choice creates ambiguity and risk.

A study plan for Professional Practice, Ethics & Laws in NCEES PE Agricultural and Biological Engineering

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (58% of the 36 questions): Safety and liability (12, 33%); Using and citing standards in design (9, 25%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Licensure law: RA 10915 (Philippines) and NCEES model law (USA) (7, 19%); Standards bodies: BIS, ASABE, ISO, PAES/PNS (6, 17%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Contracts and specifications (2, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Using and citing standards in design (4 hard of 9), Licensure law: RA 10915 (Philippines) and NCEES model law (USA) (2 hard of 7), Safety and liability (3 hard of 12).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Contracts and specifications (1 easy of 2); Standards bodies: BIS, ASABE, ISO, PAES/PNS (2 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — NCEES PE Agricultural and Biological Engineering Professional Practice, Ethics & Laws

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.