LAISHA
Open Laisha

NCEES PE Agricultural and Biological Engineering

USA · NCEES (ASABE is the content partner)

1270practice questions written to this syllabus
48subjects

What NCEES PE Agricultural and Biological Engineering is

NCEES PE Agricultural and Biological Engineering is a licensing and registration exam run by NCEES (ASABE is the content partner), for candidates in USA.

Format

Computer-based, 85 questions, 9.5-hour appointment (8.5 hours of exam). Once a year (next: 28 Oct 2026). Closed book with the electronic NCEES handbook and supplied searchable ASABE standards; SI and US customary units.

Sections

How it has changed

Specifications effective October 2023; supplied-standards list effective October 2025 (including ASAE D497.7 and EP496.3 machinery management, D271.3 psychrometric data, D272.3 grain airflow resistance, EP270.5 livestock ventilation, S433.1 grain loads on bins). It tests using standards, not memorising them. Very small candidate pool: 33 first-time takers in the January 2026 pass-rate data. ASABE offers PE fee support: https://asabe.org/abelicensure. Status re-checked on ncees.org on 3 Oct 2026: still offered (not discontinued), computer-based, one day per year; next date 28 Oct 2026; first-time pass rate 91 % (33 takers, January 2026 data).

How to prepare for NCEES PE Agricultural and Biological Engineering

Where our 1270 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (56% of the questions): Hydraulic Drives & Controls (81); Agricultural Structures & Environmental Control (68); Agricultural Waste Management & Environmental Engineering (63); Food Quality, Safety & Process Plant Design (59); Remote Sensing, GIS & GNSS for Land & Water (57); Sprinkler & Micro-Irrigation Systems (46); Instrumentation, Sensors & Process Control (45); Engineering Drawing, Graphics & CAD (38); Protected Cultivation & Greenhouse Engineering (38); Machine Design (36); Professional Practice, Ethics & Laws (36); Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (32); and 4 more.

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Engineering Economics, Project & Business Management (29); Basic Electrical & Electronics Engineering (27); Soil Mechanics (27); Heat & Mass Transfer (26); Building Materials, Theory of Structures & Construction (23); Post-Harvest Engineering of Horticultural Crops (23); Water Resources Management, Floods & Canal Systems (22); Post-Harvest Engineering of Cereals, Pulses & Oilseeds (22); Bio-energy Systems: Design & Applications (21); Surveying & Levelling (20); Human Engineering, Ergonomics & Safety (20); Precision Agriculture & System Management (20); and 4 more.

    One pass per subject, then mixed sets across them.

  3. Lighter: Engineering Properties of Agricultural Produce (19); Strength of Materials (18); Tractor & Automotive Engines (IC Engines) (17); Mechanics of Tillage & Traction (Soil Dynamics) (16); Farm Machinery Management & Economics (16); Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (15); Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser (14); Soil Science for Engineers (13); Watershed Hydrology (13); Fluid Mechanics & Open Channel Hydraulics (12); Farm Machinery Testing, Evaluation & Standards (9); Groundwater, Wells & Pumps (9); and 4 more.

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Electrical Machines & Power Utilisation (20 hard of 29), Watershed Planning & Management (4 hard of 6), Post-Harvest Engineering of Horticultural Crops (15 hard of 23).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: ncees.org

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Complete combustion of propane follows C₃H₈ + 5O₂ → 3CO₂ + 4H₂O. How much CO₂ does one kilogram of propane produce?

  1. 2.75 kg
  2. 1.0 kg
  3. 3.0 kg
  4. 4.0 kg
Answer and working

C. 3.0 kg

Molar mass of propane is 44 g/mol and each mole gives 3 mol CO₂ (3 × 44 = 132 g), so 132/44 = 3.0 kg CO₂ per kg. 2.75 kg is the methane figure (44/16); 1.0 kg counts one mole of CO₂ only; 4.0 kg uses the water moles.

Protected Cultivation & Greenhouse Engineering · CO2 enrichment

2. A viscous mix flows laminar at 10,000 L/h through a holding tube of 47.5 mm bore and must be held 15 s. The minimum tube length is about

  1. 47 m
  2. 28.7 m
  3. 11.8 m
  4. 23.5 m
Answer and working

A. 47 m

A = π/4 × 0.0475² = 1.772e-3 m²; mean v = 2.778e-3/1.772e-3 = 1.57 m/s; laminar v_max = 3.14 m/s; L = 3.14 × 15 = 47.0 m. Designing on mean velocity gives 23.5 m; the turbulent ratio gives 28.7 m. 11.8 m uses the bore as the radius in the area (π × 0.0475²).

Food & Dairy Engineering · Pasteurisation: HTST and LTLT

3. A bunker silo feeds 60 cows 25 kg of silage each per day. Silage density is 650 kg/m³ and the face must be removed at least 15 cm per day to limit spoilage. What is the largest face area that achieves this?

  1. 0.35 m²
  2. 23.1 m²
  3. 10.0 m²
  4. 15.4 m²
Answer and working

D. 15.4 m²

Daily volume = 60 × 25/650 = 2.31 m³; face = 2.31/0.15 = 15.4 m². 0.35 m² multiplies; 23.1 m² uses 10 cm; 10.0 m² skips the density conversion. Recommended removal rates vary (roughly 15–30 cm/day), so the stem fixes it.

Agricultural Structures & Environmental Control · Structural design of bins and silos

4. A sprinkler system is being designed for a soil whose basic infiltration rate is 8 mm/h. Which design rule applies to the sprinkler application rate?

  1. It should not exceed the basic infiltration rate, to avoid ponding and runoff late in each irrigation
  2. It can be set without reference to infiltration because sprinkler water never ponds on any soil
  3. It should exceed the infiltration rate so that surface ponding helps distribute the water evenly
  4. It should equal the initial infiltration rate measured in the first minutes of the ring test
Answer and working

A. It should not exceed the basic infiltration rate, to avoid ponding and runoff late in each irrigation

Infiltration rate falls during an irrigation, so the application rate must be at or below the steady (basic) rate, with a margin on slopes and crusting soils. The initial rate is far higher and would cause runoff later; ponding under sprinklers causes runoff and non-uniformity rather than helping.

Soil Science for Engineers · Infiltration

5. A lightly loaded journal bearing uses oil of viscosity 0.02 Pa s. The journal runs at 20 rev/s, the unit load on the projected area is 1 MPa, and the radius-to-radial-clearance ratio is 1000. What is the friction coefficient by Petroff's equation?

  1. 0.0039
  2. 0.0079
  3. 0.0025
  4. 0.474
Answer and working

B. 0.0079

f = 2 pi^2 (mu N/p)(r/c) = 2 x pi^2 x (0.02 x 20/10^6) x 1000 = 19.74 x 4 x 10^-4 = 0.0079. Using 2 pi instead of 2 pi^2 gives 0.0025; entering speed in rpm instead of rev/s gives 0.474. 0.0039 uses pi^2 without the factor 2.

Machine Design · Rolling and sliding bearings and bearing life

6. A project's benefits are forecast in constant prices of the base year. At which rate should they be discounted?

  1. At the market interest rate, because that is the rate lenders actually charge the project
  2. At the inflation rate alone, because constant-price flows change only with general inflation
  3. At the real interest rate, which excludes inflation just as constant-price cash flows do
  4. At the market rate plus the inflation rate, to allow for inflation over the whole project life
Answer and working

C. At the real interest rate, which excludes inflation just as constant-price cash flows do

The rule is consistency: constant (real) cash flows at the real rate, actual (then-current) cash flows at the market rate, which already contains inflation. Discounting constant-price benefits at the market rate removes inflation twice and understates worth; adding inflation to the market rate makes the error worse.

Engineering Economics, Project & Business Management · Time value of money

7. A calibrated drill sows 12 % more seed per hectare in the field than in the stationary test. Which explanation is most consistent?

  1. The drive wheel turns more per metre than assumed (less skid, smaller rolling radius) or vibration raises flow
  2. The seed is lighter (lower test weight) in the field
  3. The row spacing is wider in the field than in the test, so each row must deliver 12 % more seed to cover the area
  4. The hopper is fuller in the field only
Answer and working

A. The drive wheel turns more per metre than assumed (less skid, smaller rolling radius) or vibration raises flow

More seed per area means more meter turns per metre or more flow per turn: a smaller effective rolling radius from sinkage, less skid than assumed, or vibration. A field check over a measured run reveals it.

Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser · Calibration of seed drills

8. A single-effect evaporator removes 3667 kg/h of water from milk. Feed enters at its boiling point; latent heat of vaporisation is 2358 kJ/kg and of the heating steam 2202 kJ/kg. The steam economy is about

  1. 0.93
  2. 2.0
  3. 0.86
  4. 1.07
Answer and working

A. 0.93

S = 3667 × 2358/2202 = 3926 kg/h; economy = 3667/3926 = 0.93. Inverting gives 1.07. 0.86 is the value if feed enters cold at 20 °C. 2.0 is a typical double-effect economy, not a single-effect one.

Food & Dairy Engineering · Evaporation: single and multiple effect

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 1,270 questions — NCEES PE Agricultural and Biological Engineering

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.