LAISHA
Open Laisha

NCEES PE Agricultural and Biological Engineering Remote Sensing, GIS & GNSS for Land & Water: practice questions

NCEES PE Agricultural and Biological Engineering · USA · NCEES (ASABE is the content partner)

Original practice questions written to the published syllabus · not past papers
10worked here, free
57written to this exam in this subject
6syllabus units

About NCEES PE Agricultural and Biological Engineering

NCEES PE Agricultural and Biological Engineering is a licensing and registration exam run by NCEES (ASABE is the content partner), for candidates in USA. Computer-based, 85 questions, 9.5-hour appointment (8.5 hours of exam). Once a year (next: 28 Oct 2026). Closed book with the electronic NCEES handbook and supplied searchable ASABE standards; SI and US customary units.

Source: ncees.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Remote Sensing, GIS & GNSS for Land & Water in NCEES PE Agricultural and Biological Engineering

Applied use of GIS and GNSS data in design: coordinate systems and datums, map scale and area, contributing area from DEMs, curve-number and erosion inputs from spatial data, and accuracy of GNSS positions and heights.

Mapping land and water from satellites and in GIS: images, indices, elevation models and watershed delineation.

Our 57 NCEES PE Agricultural and Biological Engineering questions in this subject: 16 easy, 31 medium, 10 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to NCEES PE Agricultural and Biological Engineering and are not shown on any other exam's page.

Question 1 · medium

Computing the mean slope of each sub-watershed from a slope raster and a sub-watershed raster is an example of which map algebra operation?

  1. A zonal operation
  2. A local operation
  3. A global operation
  4. A focal operation
Answer and working

A. A zonal operation

Zonal operations summarise one layer within zones defined by another. Local operations work cell by cell; focal operations use a moving neighbourhood (slope itself is computed focally); global operations use the whole raster, such as Euclidean distance.

Question 2 · hard

After intersecting a field-boundary layer with a soil-unit layer, many tiny thin polygons appear along boundaries that should coincide. What are they and how are they usually handled?

  1. Sliver polygons; remove them with a cluster tolerance or by eliminating small polygons
  2. Raster cells; convert them back to vector using a finer cell size
  3. Buffer zones; keep them because they mark uncertainty along each boundary
  4. Topology nodes; keep them because they record connectivity between arcs
Answer and working

A. Sliver polygons; remove them with a cluster tolerance or by eliminating small polygons

Slivers arise when the same boundary was digitised separately in two layers and the lines do not exactly match; they are removed by snapping/cluster tolerances or merging polygons below a size threshold. They are not nodes, buffers or raster artefacts.

Question 3 · medium

A flow accumulation raster from a 30 m DEM shows 5000 upstream cells at a proposed check-dam site. What is the contributing area?

  1. 1.5 km²
  2. 0.15 km²
  3. 4.5 km²
  4. 45 km²
Answer and working

C. 4.5 km²

Area = 5000 × 30 × 30 = 4,500,000 m² = 4.5 km² (450 ha). 0.15 km² multiplies by 30 m instead of 900 m²; 45 km² and 1.5 km² are unit or factor slips.

Question 4 · medium

In the Strahler stream ordering system, a third-order stream begins where

  1. two second-order streams join
  2. two first-order streams join
  3. a second-order and a first-order stream join
  4. three first-order streams join
Answer and working

A. two second-order streams join

Strahler order increases by one only when two streams of equal order meet: two second-order streams form a third-order stream. A second-order stream joined by a first-order stream stays second order; two first-order streams form a second-order stream.

Question 5 · hard

Why does automated D8 delineation often fail in flat, canal-irrigated plains, and what is a common remedy?

  1. Flat plains have no sinks at all; the remedy is to skip the fill step in the processing sequence
  2. Tiny height errors and artificial embankments dominate flow; burn in mapped drains and verify in the field
  3. Canal plains have too many streams; the remedy is to raise the accumulation threshold tenfold
  4. D8 cannot run on projected data; the remedy is to use geographic coordinates for the DEM
Answer and working

B. Tiny height errors and artificial embankments dominate flow; burn in mapped drains and verify in the field

Where relief is less than DEM error, and embankments, roads and canals control flow, D8 directions become arbitrary; mapped drainage lines are burned into the DEM and results are checked by survey. Flat DEMs usually have many spurious sinks; D8 should be run in projected coordinates; raising the threshold does not fix wrong directions.

Question 6 · easy

A receiver's clock is in error by 1 microsecond. What range error does this produce?

  1. About 300 m
  2. About 0.3 m
  3. About 30 km
  4. About 3 m
Answer and working

A. About 300 m

Range error = c × Δt = 3 × 10⁸ m/s × 1 × 10⁻⁶ s ≈ 300 m. 3 m corresponds to 10 ns; 30 km to 100 µs; 0.3 m to 1 ns.

Question 7 · medium

A farm needs centimetre-level positioning for auto-steer tractors and laying subsurface drain lines. Which technique is appropriate?

  1. Autonomous single-frequency code positioning with a handheld receiver
  2. Code-based differential GNSS from a radio beacon about 200 km away
  3. RTK using carrier-phase corrections from a base or reference network
  4. Wide-area SBAS corrections from a geostationary satellite broadcast
Answer and working

C. RTK using carrier-phase corrections from a base or reference network

Real-time kinematic positioning resolves carrier-phase ambiguities and gives centimetre accuracy over baselines of up to a few tens of km. Autonomous positioning gives metres; SBAS and code DGNSS give sub-metre to metre accuracy, not enough for drain grades.

Question 8 · easy

A basin has 24 first-order and 6 second-order streams. What is the bifurcation ratio between these orders?

  1. 18
  2. 4.0
  3. 0.25
  4. 3.0
Answer and working

B. 4.0

Rb = N1/N2 = 24/6 = 4.0. 0.25 inverts the ratio; 18 is the difference; 3.0 would need 18 first-order streams.

Question 9 · medium

A GIS assigns curve number 80 to a sub-catchment. For a storm of 100 mm, what is the direct runoff by the SCS curve-number method with Ia = 0.2S?

  1. 63.5 mm
  2. 80.0 mm
  3. 46.6 mm
  4. 50.5 mm
Answer and working

D. 50.5 mm

S = 25,400/80 − 254 = 63.5 mm; Ia = 12.7 mm. Q = (100 − 12.7)²/(100 + 0.8 × 63.5) = 87.3²/150.8 = 50.5 mm. 46.6 mm uses (P + S) in the denominator; 63.5 mm is S itself; 80 mm reads the curve number as runoff.

Question 10 · medium

Why should a raw data folder be kept separate from processed outputs in a GIS project?

  1. So original data are never overwritten and every result can be traced back to its inputs
  2. So processed outputs automatically inherit the projection of the raw folder
  3. So the GIS can load raw data faster because it indexes separate folders first
  4. So the file size limit of the GIS is not exceeded by mixing data types
Answer and working

A. So original data are never overwritten and every result can be traced back to its inputs

Keeping raw data untouched protects against accidental overwriting and supports reproducibility and audit. Folder structure does not affect loading speed, projection inheritance or file-size limits.

A study plan for Remote Sensing, GIS & GNSS for Land & Water in NCEES PE Agricultural and Biological Engineering

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (39% of the 57 questions): GIS data models (11, 19%); GNSS (11, 19%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Digital elevation models and watershed delineation (10, 18%); QGIS/ArcGIS practice (9, 16%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Spatial analysis (9, 16%); Applications to watershed, irrigation and erosion mapping (7, 12%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: QGIS/ArcGIS practice (2 hard of 9), Spatial analysis (2 hard of 9), GIS data models (2 hard of 11).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Digital elevation models and watershed delineation (4 easy of 10); Applications to watershed, irrigation and erosion mapping (2 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — NCEES PE Agricultural and Biological Engineering Remote Sensing, GIS & GNSS for Land & Wat

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.