LAISHA
Open Laisha

Agricultural and Biosystems Engineers Licensure Examination Farm Machinery Management & Economics: practice questions

Agricultural and Biosystems Engineers Licensure Examination (ABELE) · Philippines · Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC

Original practice questions written to the published syllabus · not past papers
10worked here, free
26written to this exam in this subject
11syllabus units

About Agricultural and Biosystems Engineers Licensure Examination

Agricultural and Biosystems Engineers Licensure Examination (ABELE) is a licensing and registration exam run by Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC, for candidates in Philippines. Paper-based, 2 days (Day 1 6 hours; Day 2 5 hours + 4 hours). Non-programmable calculator only; the Dec 2025 programme bans the Casio fx-991ES/ES Plus by name.

Source: prc.gov.ph.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Farm Machinery Management & Economics in Agricultural and Biosystems Engineers Licensure Examination

Choosing, sizing, costing and replacing machines, and running a custom hiring centre that pays.

Our 26 Agricultural and Biosystems Engineers Licensure Examination questions in this subject: 4 easy, 17 medium, 5 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Agricultural and Biosystems Engineers Licensure Examination and are not shown on any other exam's page.

Question 1 · medium

A 3-bottom mouldboard plough with 35 cm bottoms works at 4.5 km/h with 80 % field efficiency. How many hours of field time are needed to plough 12 ha?

  1. 3.17 h
  2. 25.4 h
  3. 31.7 h
  4. 20.3 h
Answer and working

C. 31.7 h

Width = 3 × 0.35 = 1.05 m; theoretical capacity = 4.5 × 1.05 / 10 = 0.4725 ha/h; effective = 0.378 ha/h; time = 12 / 0.378 = 31.7 h. 25.4 h ignores efficiency; 20.3 h multiplies area by efficiency instead of dividing, which makes the job look shorter when losses should make it longer. 3.17 h is a factor-of-ten slip.

Question 2 · medium

A farm must harvest 60 ha with a machine of 1.5 ha/h effective capacity, working 10 h per day. Only 60 % of days are fit for harvest. How many calendar days should be planned?

  1. 4 days
  2. 7 days
  3. 10 days
  4. 3 days
Answer and working

B. 7 days

Days = 60 / (1.5 × 10 × 0.6) = 6.67, rounded up to 7. Ignoring the workable-day probability gives 60 / 15 = 4 days, which assumes every day is fit to work. 10 days divides the 4 fit-day answer by the 40 % unfit fraction instead of the 60 % fit fraction (4/0.4); 3 days multiplies by 0.6 instead of dividing (2.4, rounded up).

Question 3 · easy

A harvest system has a combine able to harvest 4 t/h, two trailers able to haul 3 t/h in total, and a dryer drying 5 t/h. What is the capacity of the system?

  1. 5 t/h
  2. 4 t/h
  3. 12 t/h
  4. 3 t/h
Answer and working

D. 3 t/h

In a sequential chain the slowest link sets the pace: haulage at 3 t/h. The combine will wait for trailers, so buying a bigger combine would not raise output; adding haulage would. 5 t/h takes the fastest link (the dryer), 4 t/h the combine, and 12 t/h adds all three.

Question 4 · medium

Why is housing cost charged in a machinery budget even for a farm that keeps its machines in the open?

  1. Housing is a legal tax on all machines
  2. It is needed to make total cost equal the custom rate
  3. Housing cost is a variable cost that rises with hours of use each year
  4. Unhoused machines deteriorate faster and lose resale value
Answer and working

D. Unhoused machines deteriorate faster and lose resale value

The housing charge stands for either the cost of a shed or the extra depreciation and repair from weather exposure. It is a fixed cost, not a tax and not linked to hours.

Question 5 · medium

An illustrative planning relation gives average diesel use of about 0.223 L/h per kW of a tractor's maximum PTO power. What average consumption does it predict for a tractor with 60 kW maximum PTO power?

  1. 1.34 L/h
  2. 3.54 L/h
  3. 13.4 L/h
  4. 269 L/h
Answer and working

C. 13.4 L/h

Consumption = 0.223 × 60 = 13.4 L/h. Dividing 60 by 0.223 inverts the relation; 3.54 is the result converted to US gallons, not litres. The relation is an average over typical loads; actual use depends on load and must come from logs or test data. 269 L/h is that inversion (60/0.223); 1.34 L/h is a decimal slip.

Question 6 · hard

A tractor costing 700,000 is used 1,000 h/yr. Repair and maintenance are 10 % of price per year; it uses 5 L/h of diesel at 90/L; lubrication is 15 % of fuel cost; the operator costs 80/h. What is its variable cost per hour?

  1. 1297.5/h
  2. 667.5/h
  3. 600.0/h
  4. 587.5/h
Answer and working

B. 667.5/h

R&M = 70,000/1,000 = 70; fuel = 450; lubrication = 67.5; operator = 80. Total = 667.5 per hour. Omitting lubrication gives 600.0; omitting the operator gives 587.5; spreading R&M over 100 h gives 1297.5.

Question 7 · medium

Owning a reaper costs 45,000 a year in fixed costs plus 700/ha in variable costs; custom hire costs 1,600/ha. A farmer harvests 30 ha per year. Which choice is cheaper and by how much?

  1. Owning, by 18,000
  2. Hiring, by 45,000
  3. Owning, by 27,000
  4. Hiring, by 18,000
Answer and working

D. Hiring, by 18,000

Owning = 45,000 + 700 × 30 = 66,000; hiring = 1,600 × 30 = 48,000. Hiring saves 18,000, as expected since 30 ha is below the 50 ha break-even. Comparing hire cost with variable cost alone (27,000) ignores fixed cost.

Question 8 · hard

A machine costs 1,000,000. Its resale values at the end of years 1–6 are 800,000; 680,000; 580,000; 500,000; 430,000; 370,000. Repairs in years 1–6 are 20,000; 40,000; 70,000; 110,000; 160,000; 220,000. Ignoring interest, after how many years should it be replaced?

  1. 3 years
  2. 6 years
  3. 4 years
  4. 2 years
Answer and working

A. 3 years

Average annual cost for n years = [(P − resale_n) + Σ repairs]/n: n = 1: 220,000; n = 2: 190,000; n = 3: 183,333; n = 4: 185,000; n = 5: 194,000; n = 6: 208,333. The minimum is at n = 3. Year 4 is close (185,000) but higher.

Question 9 · medium

An old combine is cheap to own but breaks down for several days in most harvests, causing shattering losses. In a replacement analysis, these losses should be:

  1. Added to the old machine's cost of keeping it another year
  2. Counted only if the combine is under warranty
  3. Ignored, because they are crop losses, not machine costs
  4. Added to the new machine's cost
Answer and working

A. Added to the old machine's cost of keeping it another year

Downtime in the critical window causes a timeliness loss that is a direct consequence of keeping the old machine, so it belongs in its marginal cost. Leaving it out biases the decision toward keeping unreliable machines.

Question 10 · medium

The Philippine law that provides the framework for agricultural and fisheries mechanisation, including standards and testing, is:

  1. Republic Act 11203
  2. Republic Act 10915
  3. Republic Act 10601
  4. Republic Act 8435
Answer and working

C. Republic Act 10601

RA 10601 (2013) is the Agricultural and Fisheries Mechanization Law. RA 10915 regulates the practice of agricultural and biosystems engineering; RA 11203 is the rice tariffication law that created the Rice Competitiveness Enhancement Fund; RA 8435 is the earlier Agriculture and Fisheries Modernization Act.

A study plan for Farm Machinery Management & Economics in Agricultural and Biosystems Engineers Licensure Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (46% of the 26 questions): Break-even use and custom-hire comparison (3, 12%); Custom hiring centre economics (3, 12%); Field efficiency and timeliness (3, 12%); Fixed costs: depreciation, interest, taxes, insurance and housing (3, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Replacement decisions (3, 12%); Variable costs: repair and maintenance, fuel and labour (3, 12%); Depreciation methods: straight line, declining balance, sum-of-years digits (2, 8%); Theoretical and effective field capacity (2, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Tractor-implement matching (2, 8%); Machinery selection and sizing (1, 4%); Mechanisation policy and subsidies (1, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Custom hiring centre economics (2 hard of 3), Depreciation methods: straight line, declining balance, sum-of-years digits (1 hard of 2), Replacement decisions (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Machinery selection and sizing (1 easy of 1); Theoretical and effective field capacity (1 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Agricultural and Biosystems Engineers Licensure Examination Farm Machinery Management & Ec

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.