ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering · India · Agricultural Scientists Recruitment Board (ICAR)
Original practice questions written to the published syllabus · not past papersASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering is a specialist certification exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. NET: 150 MCQs, 150 marks, 2 hours, −1/3 per wrong answer, English/Hindi, PG level. Combined NET/ARS/SMS/STO recruitment runs prelims, mains and interview.
Official site: pw.live.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Custom hiring centres and mechanisation schemes, cost-of-operation arithmetic, and machinery selection for local cropping systems.
Choosing, sizing, costing and replacing machines, and running a custom hiring centre that pays.
Our 37 ASRB NET questions in this subject: 2 easy, 21 medium, 14 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ASRB NET and are not shown on any other exam's page.
For a given field with fixed turning and refilling time per hectare, increasing forward speed from 5 to 8 km/h will most likely:
A. Lower field efficiency while still raising effective field capacity
Productive time per hectare falls with speed but lost time per hectare does not, so the productive share (field efficiency) falls. Effective capacity still usually rises because productive time drops more than lost time grows as a share. Losses would scale with speed only if they were proportional to distance, which turning and refilling are not.
The annual cost of a machine is C = aW + b/W, where a = 12,000 per metre of width per year (fixed costs) and b = 250,000 (labour, tractor and other costs inversely proportional to width). What is the optimum width?
C. 4.56 m
Setting dC/dW = a − b/W² = 0 gives W* = √(b/a) = √(250,000 / 12,000) = 4.56 m. b/a without the square root gives 20.8 m; √(a/b) inverts the ratio. At W*, the two cost components are equal and total cost = 2√(ab) = 109,545. 0.219 m is that inverted ratio, √(12,000/250,000); 6.45 m puts a stray factor 2 under the root (√(2b/a)).
When sizing machines, including a timeliness cost term in the analysis usually:
A. Increases the optimum size
Timeliness cost falls as the machine gets bigger (the job is done sooner), so it adds to the b/W term; a larger b gives a larger √(b/a). Timeliness cost also grows with area, so the optimum still depends on area.
A rotavator-tractor set burns 14 L/h of diesel at 90 per litre and covers 0.7 ha/h effectively. What is the fuel cost per hectare?
C. 1,800/ha
Fuel per hectare = 14 / 0.7 = 20 L; cost = 20 × 90 = 1,800 per hectare. Multiplying by capacity gives 882; 1,260 is cost per hour, not per hectare.
For a machine costing 600,000 with salvage 60,000 and a 10-year life, which method gives the largest depreciation in year 1?
B. Double-declining balance (120,000)
DDB: 0.2 × 600,000 = 120,000. SYD: 10/55 × 540,000 = 98,182. Straight line: 540,000/10 = 54,000. Sinking fund year-1 charge = annual deposit = 540,000 × 0.08/(1.08¹⁰ − 1) = 37,276, the smallest, since the method is decelerated.
The marginal-cost rule for replacement says a machine should be kept for another year as long as:
C. Next year's marginal cost is less than the minimum average annual cost
If the coming year costs less than the best achievable average, keeping it pulls the average down. Book values and the depreciation–repair comparison do not decide replacement.
As a machine ages, how do its annual depreciation and annual repair cost usually change?
B. Depreciation falls and repair cost rises, so average cost is U-shaped
Market value drops most in the early years and repairs grow with accumulated wear. Their sum averaged over years owned is U-shaped, with the minimum at the economic life.
Two identical tractors are bought on different farms; one works 1,200 h a year and the other 400 h. Other things equal, the economic life in years of the heavily used tractor is likely to be:
D. Shorter, because hours and repair costs accumulate faster
Repair cost is a function of accumulated hours; at three times the use, the rising part of the cost curve is reached in fewer years. Lower fixed cost per hour does not change the timing of the minimum-average-cost point in the same direction.
A central aim of supporting custom hiring centres under national mechanisation schemes is to:
B. Reach small and marginal farmers who cannot justify owning machines
Small holdings are below the break-even use for most machines; hire centres spread fixed cost across many farms. They complement, not replace, private ownership.
Which is a well-recognised risk of large capital subsidies for individual tractor purchase?
C. Machines go mainly to larger farmers and many are under-used
Individual subsidies tend to reach farmers who could already afford machines, and subsidised tractors often run too few hours to pay. Many programmes therefore shifted support to hire services. Subsidised ownership, if anything, adds hire supply rather than raising rates.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.